HP Dv9260nr Memory Modules - Windows XP
HP Dv9260nr - Pavilion - Core 2 Duo GHz Manual
View all HP Dv9260nr manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Dv9260nr manual content summary:
- HP Dv9260nr | Memory Modules - Windows XP - Page 1
Memory Modules User Guide - HP Dv9260nr | Memory Modules - Windows XP - Page 2
in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: July 2006 Document Part Number: 416617-001 - HP Dv9260nr | Memory Modules - Windows XP - Page 3
Table of contents 1 Replacing the memory module 2 Effect of increasing memory on the hibernation file Index ...7 ENWW iii - HP Dv9260nr | Memory Modules - Windows XP - Page 4
iv ENWW - HP Dv9260nr | Memory Modules - Windows XP - Page 5
down the computer through the operating system. 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface. 6. Remove the battery from the computer. 7. Loosen the memory module compartment cover screws - HP Dv9260nr | Memory Modules - Windows XP - Page 6
module compartment cover (2) away from the computer. 9. Remove the memory module: a. Pull away the retention clips (1) on each side of the memory module. The memory module tilts up. CAUTION To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components - HP Dv9260nr | Memory Modules - Windows XP - Page 7
applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. CAUTION To prevent damage to the memory module, do not bend the memory module. 11. Align the tabs (1) on the memory module compartment cover with the notches on the computer. 12. Close - HP Dv9260nr | Memory Modules - Windows XP - Page 8
13. Tighten the memory module compartment cover screws (3). 14. Replace the battery. 15. Reconnect external power and external devices. 16. Turn on the computer. 4 Chapter 1 Replacing the memory module ENWW - HP Dv9260nr | Memory Modules - Windows XP - Page 9
turns off the computer. The operating system reserves space on the hard drive to store the hibernation file based on the amount of system memory. When you increase the system memory, the operating system increases the hard drive space reserved for the hibernation file. If you experience problems - HP Dv9260nr | Memory Modules - Windows XP - Page 10
6 Chapter 2 Effect of increasing memory on the hibernation file ENWW - HP Dv9260nr | Memory Modules - Windows XP - Page 11
Index H hard disk drive space 5 hard drive space 5 hibernation 5 hibernation file 5 M memory increasing 5 replacing memory modules 1 memory module inserting 3 removing 2 replacing 1 memory module compartment cover removing 2 replacing 3 ENWW Index 7 - HP Dv9260nr | Memory Modules - Windows XP - Page 12
8 Index ENWW - HP Dv9260nr | Memory Modules - Windows XP - Page 13
- HP Dv9260nr | Memory Modules - Windows XP - Page 14
Memory Modules
User Guide