HP Dx5150 Hardware Reference Guide - dx5150 Microtower Model (2nd Edition)
HP Dx5150 - Compaq Business Desktop Manual
UPC - 882780485433
View all HP Dx5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Dx5150 manual content summary:
- HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 1
Hardware Reference Guide HP Business Desktops dx5150 Microtower model Document Part Number: 374056-002 February 2005 This guide provides basic information for upgrading this computer model. - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 2
Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft and Windows are trademarks of Microsoft Corporation in the U.S. and other countries. The only warranties for HP products and services Guide HP Business Desktops dx5150 Microtower - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 3
1 Product Features Standard Configuration Features 1-1 Front Panel Components 1-2 Rear Panel Components 1-3 Standard Keyboard Components 1-4 Optional HP Modular Keyboard 1-5 Special Mouse Functions 1-5 Serial Number Location 1-5 2 Hardware Upgrades Serviceability Features 2-1 Warnings and - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 4
Contents A Specifications B Battery Replacement C Security Lock Provisions Installing a Security Lock C-1 D Electrostatic Discharge Routine Care E-1 Optical Drive Precautions E-2 Operation E-2 Cleaning E-2 Safety E-3 Shipping Preparation E-3 Index iv www.hp.com Hardware Reference Guide - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 5
Standard Configuration Features The HP dx5150 Microtower features may vary depending on the model. For a complete listing of the hardware and software installed in the computer, run the Diagnostics for Windows utility. Instructions for using this utility are provided in the Troubleshooting Guide on - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 6
(optional) 4 Diskette Drive Activity Light (optional) 5 Diskette Eject Button (optional) 6 USB (Universal Serial Bus) Ports 7 Optical Drive Eject Buttons 8 Power Button 9 Power On Light - Hard Drive Activity Light q Headphone Jack w Microphone Connector 1-2 www.hp.com Hardware Reference Guide - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 7
c Monitor Connector 3 b PS/2 Mouse Connector - Y Headphone/Line-Out Connector 4 a PS/2 Keyboard Connector q j Line-In Audio Connector 5 o Universal Serial Bus (USB) w g Microphone Connector 6 m Serial Connector 7 n RJ-45 Network Connector = c Digital Video Interface (DVI-D) Monitor Connector - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 8
Start menu in Microsoft Windows. Used in combination with other keys to perform other functions. 9 Alt Keys Used in combination with other keys; its effect depends on the application software you are using. *Keys available in select geographic regions. 1-4 www.hp.com Hardware Reference Guide - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 9
Modular Keyboard If the computer kit includes an HP Modular Keyboard, refer to the HP Modular Keyboard User Guide on the Documentation CD for component identification and setup information. Special Mouse Functions Most software applications support the use of a mouse. The functions assigned to each - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 10
Product Features 1-6 www.hp.com Hardware Reference Guide - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 11
make it easy to upgrade and service. No tools are needed for most of the installation procedures described in this chapter. Warnings and Cautions Before performing upgrades be sure to carefully read all of the applicable instructions, cautions, and warnings in this guide. Å WARNING: To reduce the - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 12
Hardware Upgrades Removing the Computer Access Panel and Front Bezel To remove the computer access panel: 1. Turn off the computer properly through the operating system and turn off any external devices. 2. Disconnect the power cord from the power outlet 1 and the computer 2, and disconnect any - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 13
Hardware Upgrades 3. Loosen the thumbscrew on the rear of the computer 1, slide the access panel toward the rear of the computer 2, then lift it off parts. Be sure the side with the access panel and pull grip is facing up. Removing the Computer Access Panel Hardware Reference Guide www.hp.com 2-3 - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 14
Upgrades 4. To remove the front bezel, press down on all three tabs on the left side of the bezel 1 then rotate the bezel off the chassis 2, beginning with the left side then the right side. Removing the Front the front bezel, insert the two bezel hooks on the right, then rotate the front bezel - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 15
, 256Mbit, 512Mbit, and 1Gbit non-ECC memory technologies ■ single-sided and double-sided DIMMS ■ DIMMs constructed with x8 and x16 DDR devices; DIMMs constructed with x4 SDRAM are not supported ✎ The system will not start if you install unsupported DIMMs. Hardware Reference Guide www.hp.com 2-5 - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 16
Hardware Upgrades DIMM Sockets The system will automatically operate in single channel mode or a higher-performing dual channel mode, depending on how the DIMMs are installed. ■ In single channel mode, always populate the XMM1 socket first. If you add a second DIMM of a different memory size than - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 17
memory channel A. Sockets XMM2 and XMM4 operate in memory channel B. DIMM Socket Locations Item 1 2 3 4 Description DIMM socket XMM1, Channel A DIMM socket XMM2, Channel B DIMM socket XMM3, Channel A DIMM socket XMM4, Channel B Socket Color Black Black Blue Blue Hardware Reference Guide www.hp - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 18
access panel and front bezel. Refer to "Removing the Computer Access Panel and Front Bezel." 4. Locate the memory module sockets. Å WARNING: To reduce risk of personal injury from hot surfaces, allow the internal system components to cool before touching. 2-8 www.hp.com Hardware Reference Guide - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 19
3. 7. Repeat steps 5 and 6 to install any additional modules. 8. Replace the front bezel and computer access panel. Refer to "Reassembling the Computer." The computer automatically recognizes the additional memory the next time you power on the computer. Hardware Reference Guide www.hp.com 2-9 - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 20
power outlet and disconnect any external devices. 3. Lay the computer on its side with the access panel side up. 4. Remove the computer access panel. Refer to "Removing the Computer Access Panel and Front Bezel." 5. Identify the slot into which you want to insert the expansion card. 2-10 www.hp - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 21
Hardware Upgrades 6. Remove the screw on the slot cover retention latch. Removing the Expansion Slot Latch Retaining Screw Hardware Reference Guide www.hp.com 2-11 - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 22
Hardware Upgrades 7. Remove the slot cover retention latch by pulling it up 1. 8. Remove the slot cover by sliding the slot cover up and pulling it toward the inside of the chassis 2. Removing the Expansion Slot Cover 2-12 www.hp.com Hardware Reference Guide - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 23
Hardware Upgrades 9. Install the expansion card by carefully holding the card just above the expansion slot on the system board, then moving an expansion card, press firmly on the card so that the whole connector seats properly in the expansion card slot. Hardware Reference Guide www.hp.com 2-13 - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 24
Hardware Upgrades 10. Push the expansion slot latch down and insert the computer properly through the operating system, then turn off any external devices. 2. Disconnect the power cord from the power outlet and disconnect any external devices. 3. Remove the computer cover. Refer to "Removing - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 25
Hardware Upgrades 4. Remove the screw on the slot cover retention latch and pull the slot cover retention latch up. 5. Hold components during operation. 9. Complete the procedure described in the "Reassembling the Computer" section of this chapter. Hardware Reference Guide www.hp.com 2-15 - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 26
Hardware Upgrades Replacing or Upgrading a Drive The computer supports up to six drives that may be installed in various configurations. This section describes the procedure for replacing or upgrading the storage drives. A Torx screwdriver is needed to replace the guide screws on a drive. Ä CAUTION: - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 27
Panel and Front Bezel." 3. Disconnect the power and data cables from the back of the drive, as indicated in the following illustrations. Disconnecting the Optical Drive Cables ✎ Linux systems will also have an audio cable connected to the optical drive. Hardware Reference Guide www.hp.com 2-17 - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 28
Hardware Upgrades Disconnecting the Diskette Drive Cables 2-18 Disconnecting the Hard Drive Power 1 and Data 2 Cables www.hp.com Hardware Reference Guide - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 29
Hardware Upgrades 4. A latch drive bracket with release tabs secures the drives in the drive bay. Lift the release tab on the latch drive bracket 1 for the drive you want to remove, then slide the drive from its drive bay 2. Removing the Drives 5. Remove the four guide screws (two on each side) - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 30
a hard drive in your computer for the first time, refer to "Configuring the SATA Hard Drive" on page 2-25 for information. ✎ Make sure to back up the data on the old hard drive before removing it so that you can install the data onto the new hard drive. 2-20 www.hp.com Hardware Reference Guide - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 31
Hardware Upgrades 1. Install the four guide screws (two on each side) that were removed from the old drive into the new drive. The screws help guide the drive into its proper position in the bay. Extra guide screws are provided on the front of the chassis under the front bezel. ✎ There are a total - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 32
Hardware Upgrades 3. Reconnect the power and data cables to the drive as indicated in the following illustrations. Reconnecting the Optical Drive Cables ✎ Linux systems will also have an audio cable to be connected to the optical drive. 2-22 www.hp.com Hardware Reference Guide - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 33
Hardware Upgrades Reconnecting the Diskette Drive Cables Reconnecting the Hard Drive Power 1 and Data 2 Cables Hardware Reference Guide www.hp.com 2-23 - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 34
the computer. ✎ If you replaced the primary hard drive, insert the Restore Plus! CD to restore the operating system, software drivers, and/or any software applications that were preinstalled on the computer from HP. Follow the instructions in the guide included with the restore CD. When the restore - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 35
Microsoft Windows, click Start > Shut Down > Restart. 2. At the prompt, press Ctrl+S or F4 to enter the RAID utility. Follow the instructions to create RAID sets. For more detailed information, see the RAID installation guide at http://www.hp.com under support and drivers for the dx5150. Hardware - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 36
Hardware Upgrades Reassembling the Computer 1. Position the chassis in the upright position. Insert the two hooks on the right side of the that the three tabs on the left side of the bezel snap into the slots on the chassis 2. Replacing the Front Bezel 2-26 www.hp.com Hardware Reference Guide - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 37
Hardware Upgrades 2. Place the side access panel in the proper position on the chassis and slide it into place 1. Ensure that the hole for the thumbscrew is aligned with the hole in the chassis and tighten the thumbscrew 2. Replacing the Side Access Panel Hardware Reference Guide www.hp.com 2-27 - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 38
Hardware Upgrades 3. Reconnect the power cable to the computer 1 and plug the cable into an electrical outlet 2. Reconnecting the Power Cable 4. Reconnect the network interface controller (NIC) ports. 5. Turn on the computer by pressing the power button. 2-28 www.hp.com Hardware Reference Guide - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 39
A Specifications HP dx5150 Microtower Microtower Dimensions Height Width Depth 14.5 in 6.88 in 16.5 in 36.8 cm 17.5 cm 42.0 cm Approximate Weight 23.8 lb 10 . Heat Dissipation Maximum Typical 1260 BTU/hr 256 BTU/hr 317 kg-cal/hr 65 kg-cal/hr Hardware Reference Guide www.hp.com A-1 - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 40
Specifications HP dx5150 Microtower (Continued) Input Voltage Switch Setting Power Supply 115 V 230 V Operating Voltage Range Rated Voltage Range Rated Line Frequency 90-132 VAC 100-127 VAC 47-63 Hz 180-264 VAC 200-240 VAC 47-63 Hz ✎ This system utilizes a passive power factor corrected - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 41
is NOT connected to AC power. Å WARNING: The computer HP spare designated for this product. Ä CAUTION: Before replacing the battery, it is important to back up the computer CMOS settings. When the battery is removed or replaced, the CMOS settings will be cleared. Refer to the Troubleshooting Guide - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 42
turn off any external devices. Disconnect the power cord from the power outlet and disconnect any external devices. Then remove type of battery holder on the system board, complete the following instructions to replace the battery. Type 1 a. Lift the battery out www.hp.com Hardware Reference Guide - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 43
Battery Replacement Type 2 a. To release the battery from its holder, squeeze the metal clamp that extends above one edge of the battery. b. When the battery pops up, lift it out. Removing a Coin Cell Battery (Type 2) Hardware Reference Guide www.hp.com B-3 - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 44
replaced, use the following steps to complete this procedure. 4. Replace the computer access panel. 5. Plug in the computer and turn on power to the computer. 6. Reset the date and time, your passwords, and any special system setups, using Computer Setup. Refer to the Computer Setup (F10) Utility - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 45
C Security Lock Provisions Installing a Security Lock The security locks displayed below and on the following page can be used to secure the Microtower computer. Installing a Cable Lock Hardware Reference Guide www.hp.com C-1 - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 46
Security Lock Provisions I Installing a Padlock C-2 www.hp.com Hardware Reference Guide - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 47
straps with a minimum of 1 megohm +/- 10 percent resistance in the ground cords. To provide proper ground, wear the strap snug against the skin. Hardware Reference Guide www.hp.com D-1 - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 48
work mat. If you do not have any of the suggested equipment for proper grounding, contact an HP authorized dealer, reseller, or service provider. ✎ For more information on static electricity, contact an HP authorized dealer, reseller, or service provider. D-2 www.hp.com Hardware Reference Guide - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 49
humidity ranges for the computer, refer to Appendix A, "Specifications" in this guide. ■ Operate the computer on a sturdy, level surface the keyboard, with the keyboard feet down, directly against the front of the desktop unit as this also restricts airflow. ■ Never operate the Guide www.hp.com E-1 - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 50
the panel and controls with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution. Never spray cleaning fluids directly on the unit. ■ Avoid using any type of solvent, such as alcohol or benzene, which may damage the finish. E-2 www.hp.com Hardware Reference Guide - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 51
object or liquid falls into the drive, immediately unplug the computer and have it checked by an authorized HP service provider. Shipping Preparation Follow these For environmental nonoperating ranges, see Appendix A, "Specifications" in this guide. Hardware Reference Guide www.hp.com E-3 - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 52
Computer Operating Guidelines, Routine Care and Shipping Preparation E-4 www.hp.com Hardware Reference Guide - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 53
2-16 locating 2-16 components front panel 1-2 rear panel 1-3 computer operating guidelines E-1 security lock C-1 shipping preparation E-3 specifications A-1 D DDR-SDRAM 2-5 DIMMs 2-5 diskette drive activity light 1-2 eject button 1-2 Hardware Reference Guide Index installing 2-16 locating - HP Dx5150 | Hardware Reference Guide - dx5150 Microtower Model (2nd Edition) - Page 54
2-24 headphone jack 1-2 headphone line-out connector 1-3 I installation drives 2-17, 2-20 expansion card 2-10 installing expansion card 2-11, 2-13 memory 2-5 K keyboard 1-4 PS/2 port 1-3 L latch drive bracket 2-19 M memory dual channel mode 2-6 installing 2-5 locating sockets 2-6 specifications
Hardware Reference Guide
HP Business Desktops
dx5150 Microtower model
Document Part Number: 374056-002
February
2005
This guide provides basic information for upgrading this computer
model.