HP ENVY 14t-1200 HP ENVY 14 Notebook PC - Maintenance and Service Guide
HP ENVY 14t-1200 Manual
View all HP ENVY 14t-1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP ENVY 14t-1200 manual content summary:
- HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 1
HP ENVY 14 Notebook PC Maintenance and Service Guide - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 3
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 4
iv Safety warning notice - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 5
Keys ...7 Lights ...8 TouchPad ...9 Display ...10 Front ...11 Left side ...12 Right side ...13 Bottom components ...15 3 Illustrated parts catalog 16 Service tag ...16 Computer major components 18 Door Kit ...24 Mass storage devices ...25 Miscellaneous parts ...26 Sequential part number listing - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 6
Packaging and transporting guidelines 36 Component replacement procedures 38 Service tag ...38 Computer feet ...39 Battery ...39 SIM ...41 Mass a BIOS update 84 6 Specifications ...86 Computer specifications ...86 14.5-inch, SVA display specifications 87 Hard drive specifications ...88 vi - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 7
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive specifications 89 7 Backup and recovery ...90 Recovery discs ...91 Performing a system recovery 92 Recovering using the dedicated recovery partition 92 Recovering using the recovery discs 92 Backing up your information ...93 Using Windows - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 8
viii - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 9
1 Product description Category Product Name Processors Description HP ENVY 14 Notebook PC Intel Core i7-840QM 1.86- to 3.06-GHz, 45W turbo processor (1333-MHz FSB, 8-MB L3 cache, Quad Core) Intel Core i7-820QM 1.73- to 3. - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 10
Graphics Supports BD playback with HD decode, DX10.1 support and HDMI support 14.5-in, Supports dual-channel memory Supports up to 8192 GB of system RAM DDR3/1333-MHz Supports 1024×1) ● 2048-MB total system memory (2048×1 or 1024×2) Supports 6.35-cm (2.5-in) hard drives (HD) and solid-state drives - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 11
digital microphones with beam-forming, echo-cancellation, noise-suppression software IDT92HD80 HD audio with D3 mode support Supports Microsoft Premium Requirements Dolby advanced audio 2 Pavilion-branded Altec Lansing speakers Low-light HD webcam (fixed, no tilt) with activity LED, 1280×720 - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 12
-45 (Ethernet, includes link and activity lights) ● USB 2.0 (3) Keyboard/ Full-size (14.5 in), backlit, island-style keyboard pointing devices f5/f6 control for backlight brightness TouchPad with gesture support (HP-defined, scroll, pinch, zoom) Taps enabled by default Power requirements 90W - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 13
Category Operating system Serviceability Description Preinstalled: ● Windows® 7 Home Premium 64-bit ● Windows 7 Home Professional 64-bit ● Windows 7 Ultimate 64-bit ● Linux (configurable with embedded HP QuickWeb End-user replaceable parts: ● AC adapter ● Battery ● Hard drive ● Memory modules (2) ● - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 14
to turn off the computer. To learn more about your power settings, select Start > Control Panel > System and Security > Power Options, or refer to the HP Notebook Reference Guide. - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 15
Keys Item (1) (2) (3) (4) (5) (6) Component esc key fn key Windows logo key Windows applications key Action keys Optical drive eject key Description Displays system information when pressed in combination with the fn key. Displays system information when pressed in combination with the esc key. - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 16
Lights Item (1) Component TouchPad off indicator (2) Power light (3) Mute light (4) Wireless light Description ● Amber: The TouchPad is off. ● Off: The TouchPad is on. ● White: The computer is on. ● Blinking white: The computer is in the Sleep state. ● Off: The computer is off or in - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 17
TouchPad Item (1) Component TouchPad off indicator (2) TouchPad zone (3) Left TouchPad button (4) Right TouchPad button Description Turns the TouchPad on and off. Quickly double-tap the TouchPad off indicator to turn the TouchPad on and off. Moves the pointer and selects or activates items - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 18
and captures still photographs. To access the webcam, select Start > All Programs > HP > HP MediaSmart > HP MediaSmart Webcam. (5) Webcam light On: The webcam is in use. *The antennas or region. These notices are located in Help and Support. 10 Chapter 2 External component identification - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 19
Front Item (1) (2) (3) Component Speakers (2) Bluetooth compartment Digital Media Slot Description Produce sound. Contains a Bluetooth device. Supports the following digital card formats: ● MultiMediaCard ● Secure Digital (SD) Memory Card ● Secure Digital High Capacity Memory card ● Secure - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 20
a device is connected to the jack, the computer speakers are disabled. NOTE: Be sure that the device cable has a 4conductor connector that supports both audio-out (headphone) and audio-in (microphone). Produces sound when connected to optional powered stereo speakers, headphones, ear buds, a headset - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 21
Hard Drive Protection has temporarily parked the hard drive. NOTE: For information on HP ProtectSmart Hard Drive Protection, refer to the HP Notebook Reference Guide. Connects a high-performance eSATA component, such as an eSATA external hard drive, or connects an optional USB device. Connects - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 22
is a battery error. ● Amber: A battery is charging. ● White: The computer is connected to external power and the battery is fully charged. Connects an AC adapter. 14 Chapter 2 External component identification - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 23
replace the module and then receive a warning message, remove the module to restore computer functionality, and then contact technical support through Help and Support. Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 24
tag When ordering parts or requesting information, provide the computer serial number and model number provided on the service tag. Item (1) (2) (3) Component Product name Serial number (s/n) Part number/Product number (p/n) 16 Chapter 3 Illustrated parts catalog Description This is the product - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 25
Item (4) (5) Component Warranty period Model description Description This number describes the duration of the warranty period for the computer. This is the alphanumeric identifier used to locate documents, drivers, and support for the computer. Service tag 17 - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 26
Computer major components 18 Chapter 3 Illustrated parts catalog - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 27
Item (1) (2) Description Spare part number 14.5-in, LED, HD, AntiGlare, flush glass display assembly (includes display panel cable, webcam/ microphone module and cable, 2 WLAN antenna cables and transceivers, and 2 WWAN antenna - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 28
Item (3) (4) (5) (6) (7) (8) (9a) (9b) Description ● For use in Germany ● For use in Italy ● For use in Japan ● For use in Latin America ● For use in the Netherlands ● For use in Portugal ● For use in Russia ● For use in Saudi Arabia ● For use in South Korea ● For use in Spain ● For use in - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 29
Item (10) (11) (12) Description Spare part number NOTE: See Door Kit on page 24 for more Door Kit component information. DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe (includes cable, connector board, and retention rails) 608374-001 System board (includes replacement - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 30
Item (13) (14) (15) (16) (17) (18) (19) (20) Description Intel Core i3-350M 2.26-GHz, 25W processor (1066-MHz FSB, 3-MB L3 cache, Dual Core) Intel Pentium - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 31
Item (21) (22) Description Spare part number 1024-MB 598859-001 RTC battery (includes cable and double-sided tape) 581926-001 WLAN module: Broadcom 43224 802.11a/b/g/n 2×2 WiFi Adapter for use in Antigua and Barbuda, Barbados, Belize, Canada, the Cayman Islands, Guam, Puerto Rico, Trinidad - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 32
Door Kit Item (1) (2) Description Door Kit: For use only with Beats Edition computer models: For use only with standard computer models: Includes: Battery cover Memory module/wireless module compartment cover Spare part number 629879-001 608384-001 24 Chapter 3 Illustrated parts catalog - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 33
Mass storage devices Item (1) (2) Description Spare part number Hard drive (includes hard drive bracket and screws): 750-GB, 7200-rpm 633252-001 640-GB, 7200-rpm 621046-001 640-GB, 5400-rpm 631161-001 500-GB, 7200-rpm 634919-001 320-GB, 7200-rpm 603783-001 250-GB, 7200-rpm 608369-001 - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 34
Miscellaneous parts Description AC adapter: 90W PFC RC/V HP Smart AC adapter 90W PFC RC/V EM HP Smart AC adapter 90W PFC RC/V EM 3W HDMI to VGA adapter Power cord: For use in Argentina For use in Italy For use in - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 35
Sequential part number listing Spare part number 490371-001 490371-011 490371-021 490371-031 490371-061 490371-081 490371-111 490371-201 490371-202 490371-291 490371-AA1 490371-AB1 490371-AD1 490371-D01 490371-D61 530607-001 531993-001 572509-001 572510-001 581926-001 582564-001 Description Power - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 36
Spare part number 582564-002 583053-001 586170-001 593548-001 594187-001 594188-001 597623-001 597624-001 598856-001 598859-001 599092-001 602410-001 603783-001 608364-001 608365-001 Description Broadcom 43224 802.11a/b/g/n 2×2 WiFi Adapter for use in Afghanistan, Albania, Algeria, Andorra, Angola, - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 37
-051 608375-061 608375-071 608375-121 608375-131 608375-141 608375-161 608375-171 608375-201 608375-251 608375-281 608375-291 Description 14.5-in, LED, HD+, AntiGlare, flush glass WVA display assembly for use only on standard computer models (includes display panel cable, webcam/microphone module - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 38
: See Door Kit on page 24 for more Door Kit component information. Cable Kit (includes the Bluetooth module cable) 90W PFC RC/V HP Smart AC adapter 90W PFC RC/V EM HP Smart AC adapter Intel Core i7-740QM 1.73- to 2.80-GHz, 45W turbo processor (1333-MHz FSB, 6-MB L3 cache, Quad - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 39
; includes replacement thermal material) Power cord for use in North America 14.5-in, LED, HD, AntiGlare, flush glass SVA display assembly for use 2 WWAN antenna cables and transceivers) Battery connector board (includes cable) 14.5-in, LED, HD, AntiGlare, flush glass SVA display assembly for use - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 40
Spare part number 619400-B31 619400-BG1 619400-DH1 619401-001 619402-001 619997-001 621046-001 622391-001 623899-001 625485-001 625823-001 625824-001 625825-001 625831-001 626039-001 629879-001 631161-001 633252-001 634250-001 634366-001 634692-001 634693-001 634919-001 Description Keyboard for use - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 41
plastic parts. Use care when handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions. Cables and connectors CAUTION: When servicing the computer, be sure that cables are placed in their proper locations during the reassembly process. Improper cable - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 42
Drive handling CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the computer, damage to a drive, or loss of information, observe these precautions: Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the computer is - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 43
electrostatic voltage levels Relative humidity 10% 40% 35,000 V 15,000 V 12,000 V 5,000 V 6,000 V 800 V 2,000 V 700 V 11,500 V 4,000 V 14,500 V 5,000 V 26,500 V 20,000 V 21,000 V 11,000 V 55% 7,500 V 3,000 V 400 V 400 V 2,000 V 3,500 V 7,000 V 5,000 V Preliminary replacement - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 44
material. ● Use a wrist strap connected to a properly grounded work surface and use properly grounded tools and equipment. ● Use conductive field service tools, such as cutters, screwdrivers, and vacuums. ● When fixtures must directly contact dissipative surfaces, use fixtures made only of static - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 45
with ground cords of one megohm resistance ● Static-dissipative tables or floor mats with hard ties to the ground ● Field service kits ● Static awareness labels ● Material-handling packages ● Nonconductive plastic bags, tubes, or boxes ● Metal tote boxes ● Electrostatic voltage levels and - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 46
servicing the computer. Make special note of each screw and screw lock size and location during removal and replacement. Service and model number provided on the service tag. Item (1) (2) (3) Component components. The part number helps a service technician determine what components and parts are - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 47
Computer feet The computer feet are adhesive-backed rubber pads. There are 4 rubber feet that attach to the base enclosure in the locations illustrated below. Battery Description 8-cell, 59-Wh, 2.00-Ah, Li-ion battery 6-cell, 62-Wh, 2.80-Ah, Li-ion battery Spare part number 593548-001 602410-001 - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 48
2. Remove the battery cover. The battery cover is included in the Door Kit, spare part numbers 608384-001 (for use only with standard computer models) and 629879-001 (for use only with Beats Edition computer models). 3. Slide the right battery release latch (1) to unlock the battery. 4. Slide and - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 49
SIM Before removing the SIM, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 50
Description Hard drive (includes hard drive bracket): 750-GB, 7200-rpm 640-GB, 7200-rpm 640-GB, 5400-rpm 500-GB, 7200-rpm 320-GB, 7200-rpm 250-GB, 7200-rpm 750-GB, 5400-rpm only (does not include hard drive bracket or screws) Solid-state drive (includes hard drive bracket): 256-GB 160-GB Hard Drive - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 51
Remove the mass storage device: 1. Remove the four Phillips PM2.0×3.0 screws that secure the mass storage device to the computer. 2. Use the Mylar tab (1) to slide the mass storage device to the right and disconnect it from the system board. 3. Lift the mass storage device (2) out of the mass - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 52
country or region. If you replace the module and then receive a warning message, remove the module to restore device functionality, and then contact technical support. Before removing the WWAN module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 53
2. Remove the two Phillips PM2.0×3.0 screws that secure the WWAN module to the system board. (The WWAN module tilts up.) 3. Remove the WWAN module by pulling the module away from the slot at an angle. NOTE: If the WWAN antennas are not connected to the terminals on the WWAN module, the protective - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 54
Reverse this procedure to install the WWAN module. 46 Chapter 4 Removal and replacement procedures - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 55
country or region. If you replace the module and then receive a warning message, remove the module to restore device functionality, and then contact technical support. Before removing the WLAN module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 56
Remove the WLAN module: 1. Remove the five Phillips PM2.0×3.0 screws (1) that secure the memory module/wireless module compartment cover to the computer. 2. Slide the memory module/wireless module compartment cover (2) toward the back of the computer until the tabs on the cover disengage from the - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 57
4. Disconnect the WLAN antenna cables from the terminals on the WLAN module. NOTE: The 1/black WLAN antenna cable is connected to the WLAN module 1/Main terminal. The 2/gray WLAN antenna cable is connected to the WLAN module 2/Aux terminal. 5. Remove the two Phillips PM2.0×3.0 screws that secure the - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 58
6. Remove the WLAN module by pulling the module away from the slot at an angle. NOTE: If the WLAN antennas are not connected to the terminals on the WLAN module, the protective sleeves must be installed on the antenna connectors, as shown in the following illustration. Reverse this procedure to - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 59
RTC battery Description RTC battery Spare part number 581926-001 Before removing the RTC battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 60
2. Remove the RTC battery from the system board. The RTC battery is attached to the system board with double-sided tape. Reverse this procedure to install the RTC battery. Memory module Description 4096-MB (PC3, 10600, 1333-MHz) 2048-MB (PC3, 10600, 1333-MHz) 1024-MB (PC3, 10600, 1333-MHz) Spare - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 61
2. Remove the memory module (2) by pulling it away from the slot at an angle. Reverse this procedure to install a memory module. Component replacement procedures 53 - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 62
Battery connector board Description Battery connector board (includes cable) Spare part number 617265-001 Before removing the battery connector board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 63
4. Release the battery charger board (5) as far as the power cable allows. 5. Swing the rear edge of the battery charger board (1) up and forward until it rests upside down in the battery bay. 6. Disconnect the power extension cable (2) from the battery charger board. 7. Remove the battery charger - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 64
Top cover NOTE: The top cover spare part kit includes the power button board and cable and TouchPad and cable. Description For use only on Beats Edition computer models For use only on standard computer models Spare part number 619402-001 608377-001 Before removing the top cover, follow these - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 65
2. Remove the three Phillips PM2.0×3.0 screws that secure the top cover to the computer in the battery bay. 3. Turn the computer right side up, with the front toward you. 4. Open the computer as far as it will open. 5. Lift the front edge of top cover (1) until the TouchPad cable is accessible. 6. - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 66
11. Release the ZIF connector to which the keyboard cable is attached, and then disconnect the cable (5) from the system board. 12. Remove the top cover. Reverse this procedure to install the top cover. Keyboard NOTE: The keyboard spare part kit includes a keyboard cable and a keyboard light cable. - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 67
For use in country or region: ● For use in Brazil ● For use in Canada ● For use in Denmark, Finland, and Norway ● For use in France ● For use in Germany ● For use in Italy ● For use in Japan ● For use Latin America ● For use in the Netherlands Spare part number For use in country or region: 608375 - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 68
3. Release the keyboard light cable (2) and the keyboard cable (3) through their respective openings in the top cover. 4. Turn the top cover and keyboard right-side up, with the front toward you. 5. Swing the rear edge of the keyboard (1) up and forward until it rests at an angle. 6. Slide the - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 69
Audio/USB board Description Audio/USB board (includes cable) Spare part number 608379-001 Before removing the audio/USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 70
5. Remove the audio/USB board (5) and cable. Reverse this procedure to install the audio/USB board and cable. Bluetooth module NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth module cable is included in the Cable Kit, spare part number 608385-001. - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 71
Remove the Bluetooth module: 1. Disconnect the Bluetooth module cable (1) from the SIM/WWAN board. 2. Release the Bluetooth module cable from the routing clips (2) built into the base enclosure. 3. Release the Bluetooth module (3) from the retention clip built into the base enclosure. 4. Remove the - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 72
c. WWAN module (see WWAN module on page 44) d. Memory module/wireless module compartment cover (see WLAN module on page 47) e. Top cover (see Top cover on page 56) Remove the SIM/WWAN board: 1. Disconnect the Bluetooth module cable (1) from the SIM/WWAN board. 2. Release the grounding tape (2) that - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 73
Optical drive Description DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe (includes cable, connector board, and retention rails) Spare part number 608374-001 Before removing the optical drive, follow these steps: 1. Shut down the computer. If you are unsure whether the - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 74
5. Open the computer as far as it will open. 6. Remove the four Phillips PM2.0×3.0 screws (1) that secure the optical drive to the base enclosure. 7. Remove the optical drive (2). 8. If it is necessary to replace the optical drive retention rails: a. Remove the four Philllips PM2.0×3.0 screws (1) - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 75
9. If it is necessary to replace the optical drive connector board: a. Remove the Philllips PM2.0×3.0 screw (1) that secures the connector board to the optical drive. b. Remove the connector board (2). Reverse this procedure to install the optical drive cable. Power connector cable Description - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 76
Remove the power connector cable: 1. Disconnect the power extension cable (1) from the battery connector board. 2. Release the power extension cord (2) from the system board. (The power extension cord is attached to the system board with double-sided tape.) 3. Disconnect the power connector cable - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 77
Before removing the system board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 78
2. Release the ZIF connector to which the SIM/WWAN board cable is attached, and then disconnect the cable (2) from the system board. 3. Disconnect the display panel cable (1) from the system board. 4. Disconnect the power connector cable (2) from the system board. 5. Disconnect the power extension - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 79
6. Release the power extension cord (4) from the system board. (The power extension cord is attached to the system board with double-sided tape.) 7. Remove the five Phillips PM2.5×5.0 screws that secure the system board to the base enclosure. 8. Lift the left side of the system board (1) until it - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 80
9. Remove the system board (2) by sliding it up and to the left at an angle. Reverse this procedure to install the system board. Fan/heat sink assembly Description Fan/heat sink assembly (includes replacement thermal material) Spare part number 608378-001 NOTE: To properly ventilate the computer, - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 81
assembly is removed. ● Thermal paste is used on the processor (1) and the heat sink section (2) that services it ● A thermal pad is used on the PCH chip (3) and the heat sink section (4) that services it ● Thermal paste is used on the graphics subsystem chip (5) and the heat sink section (6) that - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 82
Reverse this procedure to install the fan/heat sink assembly. Processor NOTE: The processor spare part kit includes replacement thermal material. Replacement thermal material is also available in the Thermal Material Kit, spare part number 634366-001. Description Spare part number Intel Core i7- - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 83
Description Intel Core i3-350M 2.26-GHz, 25W processor (1066-MHz FSB, 3-MB L3 cache, Dual Core) Intel Pentium P6200 2.13-GHz processor 3-MB L3 cache, 1066-MHz FSB Intel Pentium P6100 2.00-GHz processor 3-MB L3 cache, 1066-MHz FSB Intel Pentium P6000 1.86-GHz processor 3-MB L3 cache, 1066-MHz FSB - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 84
2. Lift the processor (2) straight up, and remove it. NOTE: The gold triangle (3) on the processor must be aligned with the triangle icon (4) embossed on the processor socket when you install the processor. Reverse this procedure to install the processor. 76 Chapter 4 Removal and replacement - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 85
Speakers Description Speakers (include cable) Spare part number 608381-001 Before removing the speakers, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 86
transceivers, and 2 WWAN antenna cables and transceivers. Description Spare part number 14.5-in, LED, HD, AntiGlare, flush glass SVA display assembly for SVA display assembly for use only on standard computer models 616270-001 14.5-in, LED, HD+, AntiGlare, flush glass WVA display assembly for - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 87
opening (2) in the base enclosure. 8. Disconnect the display panel cable (3) from the system board. CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. 9. Remove - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 88
10. Remove the display assembly (5). Reverse this procedure to reassemble the display assembly. 80 Chapter 4 Removal and replacement procedures - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 89
5 Setup Utility (BIOS) Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utility includes settings for the types of peripherals installed, the startup - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 90
Navigating and selecting in Setup Utility Because Setup Utility is not Windows based, it does not support the TouchPad. Navigation and selection are by keystroke. ● To choose a menu or a menu item, use the arrow keys. ● To choose an item in a list or - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 91
the BIOS may be available on the HP Web site. Most BIOS updates on the HP Web site are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file. Determining the BIOS version To - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 92
1. Access the page on the HP Web site that provides software for your computer: Windows 7-Select Start > Help and Support > Maintain. Windows XP-Select Start > Help and Support, and then select the software and drivers update. 2. Follow the on-screen instructions to identify your computer and access - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 93
NOTE: After a message on the screen reports a successful installation, you can delete the downloaded file from your hard drive. Updating the BIOS 85 - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 94
Nonoperating Maximum altitude (unpressurized) Operating (14.7 to 10.1 psia) Nonoperating (14.7 to 4.4 psia) Shock Operating Nonoperating Random vibration Operating Metric U.S. 35.6 cm 23.70 cm 2.77 cm to 2.82 cm 2.38 kg 14.02 in 9.33 in 1.09 in to 1.11 in 5.25 lbs 19.0 V dc @ 4.74 - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 95
: Applicable product safety standards specify thermal limits for plastic surfaces. The computer operates well within this range of temperatures. 14.5-inch, SVA display specifications Dimensions Width Height Diagonal Number of colors Contrast ratio Brightness Backlight Character display Total power - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 96
referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications may differ slightly. NOTE: Certain restrictions and exclusions apply. Contact technical support for details. 88 Chapter 6 Specifications - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 97
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive specifications Applicable disc Access time Random Cache buffer Data transfer rate 24X CD-ROM 8X DVD 24X CD-R 16X CD-RW 8X DVD+R 4X DVD+RW 8X DVD-R 4X DVD-RW 2.4X DVD+R(9) 5X DVD-RAM Transfer mode Read: Write: CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 98
a reasonably current backup. Tools provided by the operating system and HP Recovery Manager software are designed to help you with the following tasks your information ● Creating system restore points ● Recovering a program or driver ● Performing a full system recovery (from the partition or recovery - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 99
purchased separately) to create recovery discs, or you can purchase recovery discs for your computer from the HP Web site. If you use an external optical drive, it must be connected directly to a USB > Recovery Manager > Recovery Disc Creation. 2. Follow the on-screen instructions. Recovery discs 91 - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 100
is displayed at the bottom of the screen. Then, press f11 while the "F11 (HP Recovery)" message is displayed on the screen. 2. Click System Recovery in the Recovery Manager window. 3. Follow the on-screen instructions. Recovering using the recovery discs 1. If possible, back up all personal files - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 101
Start > Control Panel > System and Security > Backup and Restore. 2. Follow the on-screen instructions to schedule and create a backup. NOTE: Windows includes the User Account Control feature to improve the settings. Refer to Help and Support for more information. Backing up your information 93 - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 102
Panel > System and Security > System. 2. In the left pane, click System Protection. 3. Click the System Protection tab. 4. Follow the on-screen instructions. Restore to a previous date and time To revert to a restore point (created at a previous date and time), when the computer was functioning - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 103
8 Connector pin assignments Audio-in (microphone) Pin 1 2 3 Audio-out (headphone) Signal Audio signal in Audio signal in Ground Pin Signal 1 Audio out, left channel 2 Audio out, right channel 3 Ground Audio-in (microphone) 95 - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 104
HDMI Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Signal TMDS data 2+ TMDS data 2 shield TMDS data 2TMDS data 1+ TMDS data 1 shield TMDS data 1TMDS data 0+ TMDS data 0 - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 105
RJ-45 (network) Pin 1 2 3 4 5 6 7 8 Universal Serial Bus Signal Transmit + Transmit Receive + Unused Unused Receive Unused Unused Pin Signal 1 +5 VDC 2 Data 3 Data + 4 Ground RJ-45 (network) 97 - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 106
9 Power cord set requirements The wide-range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts AC, or from 220 to 240 volts AC The 3-conductor power cord set included with the computer meets the requirements for use in the country or region where the - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 107
Requirements for specific countries and regions Country/region Accredited agency Applicable note number Australia EANSW 1 Austria OVE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMKO 1 Finland FIMKO 1 France UTE 1 Germany VDE 1 Italy IMQ 1 Japan METI 3 The Netherlands - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 108
remove these components, handle them carefully. NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display assembly that site at http://www.eiai.org. This section provides disassembly instructions for the display assembly. The display assembly must be disassembled - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 109
Perform the following steps: 1. Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly. 2. Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel disengages from the display - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 110
4. Disconnect all display panel cables (1) from the display inverter and remove the inverter (2). 5. Remove all screws (1) that secure the display panel assembly to the display enclosure. 6. Remove the display panel assembly (2) from the display enclosure. 7. Turn the display panel assembly upside - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 111
10. Remove the display panel frame (2) from the display panel. 11. Remove the screws (1) that secure the backlight cover to the display panel. 12. Lift the top edge of the backlight cover (2) and swing it outward. 13. Remove the backlight cover. 14. Turn the display panel right-side up. Display 103 - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 112
15. Remove the backlight cables (1) from the clip (2) in the display panel. 16. Turn the display panel upside down. 17. Remove the backlight frame from the display panel. WARNING! The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging this - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 113
18. Remove the backlight from the backlight frame. 19. Disconnect the display cable (1) from the LCD panel. 20. Remove the screws (2) that secure the LCD panel to the display rear panel. 21. Release the LCD panel (3) from the display rear panel. 22. Release the tape (4) that secures the LCD panel to - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 114
cover illustrated 24 removal 39 spare part numbers 40 battery light 14 battery release latch 15 Bluetooth compartment 11 Bluetooth module removal 62 RJ-45 jack 97 Universal Serial Bus (USB) port 97 connectors, service considerations 33 D Digital Media Slot 11 display assembly removal 78 spare part - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 115
applications 7 Windows logo 7 L left-side components 12 light components 8 lights battery 14 drive 13 mute 8 power 8, 13 webcam 10 wireless 8 M mass storage device removal 36 part number listing, sequential 27 plastic parts, service considerations 33 pointing device, product description 4 ports - HP ENVY 14t-1200 | HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 116
, spare part number 26, 30 security cable slot 13 security, product description 4 serial number 16, 38 service considerations cables 33 connectors 33 plastic parts 33 service tag 16, 38 serviceability, product description 5 SIM slot 15 SIM, removal 41 SIM/WWAN board removal 63 spare part number 20
HP ENVY 14 Notebook PC
Maintenance and Service Guide