HP ENVY Sleekbook 6-1110us HP Envy 6 Maintenance and Service Guide
HP ENVY Sleekbook 6-1110us Manual
View all HP ENVY Sleekbook 6-1110us manuals
Add to My Manuals
Save this manual to your list of manuals |
HP ENVY Sleekbook 6-1110us manual content summary:
- HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 1
HP Envy 6 Maintenance and Service Guide IMPORTANT! This document is intended for HP authorized service providers only. - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 3
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 4
iv Safety warning notice - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 5
19 Sequential part number listing ...19 4 Removal and replacement procedures ...26 Preliminary replacement requirements 26 Tools required ...26 Service considerations ...26 Plastic parts ...26 Cables and connectors 26 Drive handling 27 Grounding guidelines ...27 Electrostatic discharge damage 27 - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 6
...56 Security bracket ...57 USB/Audio board ...58 Power connector cable ...59 Speakers ...60 Power button board ...61 Keyboard ...62 Top cover ...66 Diagnostics ...75 6 Specifications ...76 Computer specifications ...76 15.6-inch display specifications ...76 7 Backup and recovery ...78 Restoring the - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 7
Windows system restore points 83 When to create restore points 83 Create a system restore point 83 Restore to a previous date and time 83 8 Power cord set requirements ...84 Requirements for all countries ...84 Requirements for specific countries and regions 84 9 Recycling ...86 Index ...87 vii - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 8
viii - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 9
Chipset Graphics Panel Memory Description HP Envy 6 PC Intel® Core™ i5- support and HDMI support Intel® HD Graphics 3000 discrete-class graphics. Supports BD and or HD-DVD playback with HD decode, and DX11 support and HDMI support AMD Radeon™ HD 7500G for A6 APU AMD Radeon™ HD 7620G for A10 APU 15 - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 10
SATA 12-7 mm tray load Supports the following external optical drives: ● Blu-ray ROM DVD±R/RW Super Multi Double-Layer Drive ● DVD±RW and CD-RW Super Multi Double-Layer Combo Drive Dual array digital microphones Two integrated stereo speakers and subwoofer HP TrueVision high-definition webcam (fixed - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 11
Category Ports Keyboard/pointing devices Power requirements Operating system Serviceability Description HP Multi-Format Digital Media Reader supports the following digital card formats: ● MultiMediaCard ● Secure Digital (SD) Card ● Secure Digital High-Capacity (SDHC) Card ● Secure Digital Extended - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 12
and initiates Sleep if the display is closed while the power is on. NOTE: The internal display switch is not (4) Webcam light On: The webcam is in use. (5) HP TrueVision HD Webcam Records video, captures still photographs, and allows and Support. 4 Chapter 2 External component identification - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 13
Button, speakers, and subwoofer Component (1) Power button (2) Speakers (2) (3) HP Triple Bass Reflex Subwoofer Description ● When the User Guide. To learn more about your power settings, select Start > Control Panel > System and Security > Power Options, or see the User Guide. Produce sound - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 14
Keys Component (1) esc key (2) fn key (3) Windows logo key (4) Action keys (5) Windows applications key Description Displays system information when pressed in combination with the fn key. Executes frequently used system functions when pressed in combination with the b key, the spacebar, - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 15
in the Sleep state, which is an energy-saving mode. The computer shuts off power to the display and other unneeded components. ● Off: The computer is off or computer to resume quickly from inactivity. For more information, see the User Guide. ● Amber: Computer sound is off. ● Off: Computer sound is - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 16
Description Turns the TouchPad on or off. ● On: The TouchPad is off. ● Off: The TouchPad is on. Moves the on-screen pointer and selects or activates items on the screen. Functions like the left button on an external mouse. Functions like the right button on an external mouse. Component (1) RJ-45 - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 17
enhanced USB power performance. NOTE: For details about different types of USB ports, see the User Guide. Supports the following digital being accessed. ● Amber: HP 3D DriveGuard has temporarily parked the hard drive. NOTE: For information about HP 3D DriveGuard, see the User Guide. ● White: The - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 18
will not charge all USB devices or will charge using a low current. Some USB devices require power and require you to use a powered port. NOTE: For details about different types of USB ports, see the User Guide. ● White: The AC adapter is connected and the battery is charged. ● Amber: The AC adapter - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 19
Bottom Component Vents (2) Description Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. Bottom 11 - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 20
components. The part number helps a service technician to determine what components and parts are needed. This number describes the duration of the warranty period for the computer. This is the alphanumeric identifier used to locate documents, drivers, and support for the computer. 12 Chapter - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 21
Computer major components Item Component (1) Display panel (2) Top cover Spare part number 686602-001 686097-001 690198-001 Computer major components 13 - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 22
Item Component (3) Power button board (4) Keyboard (includes keyboard cable): Keyboard in black finish: For use in the United States For use in the United Kingdom and Singapore For - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 23
692759-071 692759-151 692759-171 692759-A41 692759-B31 692759-BG1 692759-DH1 688001-001 691643-001 686598-001 688002-001 Computer major components 15 - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 24
Item (8) (9a) (9b) (10) (11) Component Spare part number Media card reader assembly 688004-001 Power connector cable (includes bracket) 686593-001 Power connector cable bracket 686593-001 RTC battery: 686922-001 System board System board for use only with computer models equipped with an - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 25
Item (12) (13) (14) (15) (16) (17) (18) (19) Component Spare part number System board -001 Fan 686580-001 USB/Audio board Battery: 4-cell, 60 WHr 4.1AH Li-ion battery Security lock (in power connector kit) Hard drive (7mm SATA 2.5") 320-GB, 7200-rpm hard drive 4-GB memory module (PC3, 12800 - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 26
Mass storage devices Item (1) (2a) (2b) (3) (4) Component Hard drive (7mm SATA 2.5") 320-GB, 7200-rpm hard drive 320-GB, 5400-rpm hard drive 500-GB 5400-rpm hard drive Hard drive bracket Hard drive cable Hard drive (mSATA solid-state drive) 32-GB solid-state (SSD) drive 128-GB solid-state (SSD) - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 27
-021 490371-031 490371-061 490371-081 490371-111 Description Power cord for use in North America (3-pin, black, 1.83-m) Power cord for use in Australia (3-pin, black, 1.83-m) Power cord for use in Europe (3-pin, black, 1.83-m) Power cord for use in the United Kingdom and Singapore (3-pin, black - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 28
686587-001 686589-001 686590-001 686591-001 686592-001 Description Power cord for use in Thailand (3-pin, black, 1.83-m) Power cord for use in Brazil (3-pin, black, 1.83-m) Power cord for use in Japan (3-pin, black, 1.83-m) Power cord for use in the People's Republic of China (3-pin, black, 1.83 - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 29
686922-001 687099-001 687099-071 687099-131 687099-151 Description Power connector cable (includes bracket) Hardware kit (Hard drive) Display hinge Speaker Kit (includes left and right speakers and cable) Subwoofer Display panel (15.6 LED, HD SVA BV) Keyboard in black finish for use in the United - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 30
-state drive only (does not include bracket, connector cable, isolators, or screws) TouchPad assembly (includes bracket) Hardware kit (keyboard bracket) Power button board (includes cable) Media card reader assembly (smart card reader) System board for use only with computer models equipped with an - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 31
Spare part number 692758-041 692758-051 692758-061 692758-131 692758-141 692758-171 692758-201 692758-251 692758-271 692758-281 692758-291 692758-AB1 692758-AD1 692758-B31 692758-BA1 692758-BB1 692758-D61 692758-DB1 692758-FL1 692759-001 692759-071 692759-151 692759-171 692759-A41 692759-B31 692759- - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 32
Spare part number 693229-001 693229-501 693229-601 693230-001 693231-001 693232-001 693233-001 693234-001 693234-501 693234-601 693715-001 693753-001 693753-501 693715-001 693753-601 693754-001 693754-501 693754-601 693755-001 693755-501 693755-601 694436-001 694436-501 Description System board for - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 33
Spare part number 694436-601 694437-001 694437-30` 694437-601 694471-001 Description System board for use only with computer models equipped with an AMD processor (includes processor and replacement thermal material) System board for use only with computer models equipped with an AMD processor ( - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 34
computer does not have user-replaceable parts. Only HP authorized service providers should perform the removal and replacement procedures described only at the points designated in the maintenance instructions. Cables and connectors CAUTION: When servicing the computer, be sure that cables are placed - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 35
determine the degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many cases, ESD contains enough power to alter device parameters or melt silicon junctions. A discharge of static electricity from a finger or other conductor can destroy static - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 36
DIPS from Styrofoam Removing bubble pack from PCB Packing PCBs in foam-lined box Typical electrostatic voltage levels Relative humidity 10% 40% 35,000 V 15,000 V 12,000 V 5,000 V 6,000 V 800 V 2,000 V 700 V 11,500 V 4,000 V 14,500 V 5,000 V 26,500 V 20,000 V 21,000 V 11,000 V 55 - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 37
surface and use properly grounded tools and equipment. ● Use conductive field service tools, such as cutters, screwdrivers, and vacuums. ● When fixtures with pins, leads, or circuitry. ● Turn off power and input signals before inserting or removing connectors or test equipment. Preliminary - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 38
or soldering aids ● Nonconductive foam ● Conductive tabletop workstations with ground cords of one megohm resistance ● Static-dissipative tables or floor mats with hard ties to the ground ● Field service kits ● Static awareness labels ● Material-handling packages ● Nonconductive plastic bags - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 39
and model number provided on the service label, which is found on the service technician determine what components and parts are needed. This number describes the duration of the warranty period for the computer. This is the alphanumeric identifier used to locate documents, drivers, and support - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 40
Description 15.6-in, to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then left and right hinges that secure the display panel to the computer. NOTE: Support the display panel as you are removing the screws. 5. Loosen the edges of - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 41
7. Remove the 4 Phillips PM 2x2 display panel screws. 8. Remove any tabs or tape adhering to the display panel (1), and then move the panel towards the keyboard (2). NOTE: Support the display panel as you lean the panel forward. Component replacement procedures 33 - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 42
9. Release the support strip (1) covering the display panel connector. Disconnect the display panel Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 43
the 12 Phillips PM 7.5 millimeter long screws. 2. Remove the bottom enclosure. NOTE: To remove the bottom enclosure, use a thin, non-conductive tool such as the HP Tool Shroud separator, available on the HP website. Component replacement procedures 35 - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 44
then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 45
4. Remove the battery from the computer (3). Reverse this procedure to install the battery. Component replacement procedures 37 - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 46
then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 47
2. Remove the hard drive (3). 3. Remove the hard drive connector cable (1). Remove the 4 screws (2) securing the hard drive bracket to the hard drive, and then remove the hard drive bracket (3). 4. Remove the hard drive (3). Remove the mSATA solid-state drive: Component replacement procedures 39 - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 48
▲ Remove the screw (1), and then remove the mSATA solid-state drive (2). Reverse these procedures to reassemble and install the hard drive. 40 Chapter 4 Removal and replacement procedures - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 49
then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 50
Reverse this procedure to install the RTC battery on computer models. When installing the RTC battery, make sure the "+" sign faces up. 42 Chapter 4 Removal and replacement procedures - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 51
then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 52
5. Lift up on the rear edge, slide backwards, and then remove the TouchPad button board and cable (4). Reverse this procedure to install the TouchPad button board and cable. 44 Chapter 4 Removal and replacement procedures - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 53
, remove the module to restore device functionality, and then contact technical support. Before removing the WLAN module, follow these steps: 1. Shut down connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 54
then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 55
then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 56
Remove the fan: 1. Disconnect the fan cable (1). 2. Remove the 2 Phillips PM screws (2) securing the fan to the unit, and then lift the fan upwards (3). 3. Remove the piece of tape on the underside of the heat sink that secures the fan to the unit (4). System board NOTE: The system board spare part - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 57
Description Spare part number For use only with computer models equipped with an Intel 1.6GHz processor (includes replacement 693231-001 thermal material) For use only with computer models equipped with an Intel 1.4GHz processor (includes replacement 693232-001 thermal material) For use only - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 58
then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 59
● Subwoofer cable (3) ● USB/Audio board cable (4) ● Keyboard cable (5) ● Keyboard light cable (6) ● TouchPad board cable (7) ● Wireless cable (8) ● Display panel cable (9) ● Power button board cable (10) 2. Remove the 4 Phillips PM 2.5x3 screws (1) until the system board rests at an angle. Component - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 60
3. Remove the system board (2) by sliding it up and to the right at an angle. Reverse this procedure to install the system board. 52 Chapter 4 Removal and replacement procedures - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 61
then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 62
then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 63
then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 64
then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 65
then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 66
then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 67
then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 68
then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 69
then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 70
cover upside down, with the back edge toward you. 2. Remove the 2 Phillips PM 2.0x3x0 screws securing the Power button board to the top cover (1). 3. Remove the Power button board (2). NOTE: The Power button board's cable is attached to the board. Keyboard NOTE: The keyboard spare part kit includes - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 71
For use in country or region: Spare part number: Keyboard in black finish for use in 686836-041 Germany Keyboard in black finish for use in 686836-141 Turkey Keyboard in black finish for use in 686836-BB1 Israel Keyboard in black finish for use in 686836-DB1 Canada Backlit keyboard in black - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 72
then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 73
3. Remove the single screw (1), and then release the keyboard and keyboard bracket from the top cover (2). 4. Remove the 1 Phillips PM 2.5x3 screw securing the keyboard to the bracket (1), disconnect the keyboard cable (2) (pushing it through the bracket), and then remove the keyboard from the - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 74
then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 75
then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 76
then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 77
then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 78
Remove the display hinge covers: 1. Remove the Phillips PM screws that secure the display the left and right hinge covers (1), and then remove the hinge covers (2). 2. Remove the 4 Phillips PM screws (2 on each side) that secure the hinge to the display panel (1), and then remove the hinges (2). 70 - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 79
to a USB port can be used with Setup Utility only if USB legacy support is enabled. To start Setup Utility, follow these steps: 1. Turn on or ESC key for Startup Menu" message is displayed at the bottom of the screen. 2. Press f10 to enter Setup Utility. Changing the language of Setup Utility - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 80
choose one of the following methods: ● To exit Setup Utility menus without saving your changes, press the esc key, and then follow the on-screen instructions. - or - Use the arrow keys to select Exit > Exit Discarding Changes, and then press enter. ● To save your changes and exit Setup Utility menus - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 81
enter Setup Utility. 3. Use the arrow keys to select Exit > Load Setup Defaults. 4. Follow the on-screen instructions. 5. To save your changes and exit, press f10, and then follow the on-screen instructions. - or - Use the arrow keys to select Exit > Exit Saving Changes, and then press enter. Your - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 82
, remove, connect, or disconnect any device, cable, or cord. 1. Windows 7-Select Start > Help and Support > Maintain. Windows XP-Select Start > Help and Support, and then select the software and drivers update. 2. Follow the on-screen instructions to identify your computer and access the BIOS update - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 83
following the on-screen instructions. NOTE: After a message on the screen reports a test repeats the start-up test and checks for intermittent problems that the start-up test does not detect. ● Hard . If the battery fails the test, contact HP support to report the issue and purchase a replacement - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 84
Metric U.S. Dimensions Width 29.16 cm 11.48 in Depth 2.15 cm 8.46 in Height (front to back) 2.11 to 3.19 cm 0.83 to 1.26 in Weight With 6-cell battery 1.60 kg 3.53 lb With 3-cell battery 1.46 kg 3.22 lb Input power Operating voltage and current 19.5V dc @ 3.33 A - 65 - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 85
Contrast ratio Brightness Pixel resolution Pitch Format Configuration Backlight Character display Total power consumption Viewing angle Metric U.S. 200:1 (typical) 200 nits (typical) 0.197 mm × 0.197 mm 1366 × 768 RGB vertical stripe LED 80 × 25 2.0 W ±65° horizontal, ±50° vertical ( - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 86
your information ● Recovering a program or driver Restoring the system If the computer hard HP Recovery Manager to create these tools immediately after software setup. NOTE: All references to the hard disk drive in this guide must be reinstalled manually. Creating restore media HP recommends that you - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 87
recovery discs or a recovery flash drive: 1. Select Start > All Programs > Security and Protection > HP Recovery Manager > HP Recovery Media Creation. 2. Follow the on-screen instructions. Performing a system recovery HP Recovery Manager software allows you to repair or restore the computer to its - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 88
the ESC key for Startup Menu" message is displayed at the bottom of the screen. Then, press f11 while the "F11 (System Recovery)" message is displayed on the screen. 2. Click System Recovery in the HP Recovery Manager window. 3. Follow the on-screen instructions. 80 Chapter 7 Backup and recovery - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 89
: If the computer does not automatically restart in the HP Recovery Manager, the computer boot order needs to be changed. 3. Press f9 at system bootup. 4. Select the external optical drive or the flash drive. 5. Follow the on-screen instructions. Changing the computer boot order To change the boot - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 90
to AC power before you start the backup process. ● Allow enough time to complete the backup process. Depending on file sizes, it may take over an hour. To create a backup: 1. Select Start > Control Panel > System and Security > Backup and Restore. 2. Follow the on-screen instructions to schedule - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 91
Security > System. 2. In the left pane, click System Protection. 3. Click the System Protection tab. 4. Click Create, and then follow the on-screen instructions. Restore to a previous date and time To revert to a restore point (created at a previous date and time), when the computer was functioning - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 92
set included with the computer meets the requirements for use in the country or region where the equipment is purchased. Power cord sets for use in other countries and regions must meet the requirements of the country or region where the computer is used. Requirements for all - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 93
must be Type HVCTF 3×1.25-mm² conductor size. Power cord set fittings (appliance coupler, cable, and wall plug) must bear the BSMI certification mark. 7. For 127 V ac, the flexible cord must be Type SVT or SJT 3 x 18 AWG, with plug NEMA 5-15P (15 A, 125 V ac), with UL and CSA or C-UL marks. For 240 - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 94
dispose of the battery in general household waste. Follow the local laws and regulations in your area for battery disposal. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, see the - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 95
Drive precautions 27 spare part number 18, 20 buttons power 5 TouchPad on/off 8 C cables, service considerations 26 caps lock light, identifying 7 chipset, , spare part numbers 17, 18, 20 HDMI port, identifying 8 HP Recovery Manager 79 I integrated webcam light, identifying 4 internal display switch - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 96
29 plastic parts, service considerations 26 pointing device, product description 3 ports HDMI 8 product description 3 USB 10 USB 3.0 9 power button, identifying 5 power connector cable 21 removal 59 spare part number 16, 21 power connector, identifying 10 power cord set requirements 84 spare - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 97
USB/Audio board 17 spare part number 21 using system restore 83 V vents, identifying 11 video, product description 2 W warranty period 31 webcam light, identifying 4 webcam, identifying 4 Windows applications key, identifying 6 Windows logo key, identifying 6 wireless light 7 wireless, product - HP ENVY Sleekbook 6-1110us | HP Envy 6 Maintenance and Service Guide - Page 98
HP Envy 6
Maintenance and Service Guide
IMPORTANT! This document is intended for HP
authorized service providers only.