HP EVA4000/6000/8000 HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array r
HP EVA4000/6000/8000 Manual
View all HP EVA4000/6000/8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP EVA4000/6000/8000 manual content summary:
- HP EVA4000/6000/8000 | HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array r - Page 1
HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array release notes (XCS 6.200) This document applies to the EVA4000/6000/8000 and EVA4100/6100/8100 models only. Part number: 5697-0024 Fifth edition: May 2009 - HP EVA4000/6000/8000 | HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array r - Page 2
Legal and notice information © Copyright 2009 Hewlett-Packard Development Company, L.P. - HP EVA4000/6000/8000 | HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array r - Page 3
be installed on any EVA4000/6000/8000 or EVA4100/6100/8100 storage system. XCS 6.110 is the minimum required version for the EVA4100/6100/8100. To determine if you can upgrade to XCS 6.200 yourself, see the HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array updating product software guide for - HP EVA4000/6000/8000 | HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array r - Page 4
upgrades, see the HP 4100/6100/8100 StorageWorks Enterprise Virtual Array Family QuickSpecs document. For more information on storage system behavior during a firmware upgrade, see the HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array updating product software guide (XCS 6.200). See Table - HP EVA4000/6000/8000 | HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array r - Page 5
drive enclosures or expansion racks to an EVA must be performed by HP-authorized service personnel. Adding an expansion rack must be completed while the array is offline. Contact HP Services at http://www.hp.com/support for more information. Enhancements XCS 6.200 provide the following enhancements - HP EVA4000/6000/8000 | HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array r - Page 6
the array or host port status correctly. Also, the host port world wide names are displayed correctly in all commands. • Fixed an issue with high intensity, sequential read workloads on the EVA4000/4100/6000/6100 that could potentially affect read cache performance. HP Continuous Access EVA and HP - HP EVA4000/6000/8000 | HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array r - Page 7
CDs. HP Command View EVA • HP StorageWorks Business Copy EVA • HP StorageWorks Continuous Access EVA 8.0.1 or later HP Command View EVA 8.0.1 or later is required for 6.200 if you have an EVA4100/6100/8100. If the EVA4100/6100/8100 is in a Metrocluster environment, only version 6.0.2 is supported - HP EVA4000/6000/8000 | HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array r - Page 8
Storage, and then select either HP StorageWorks 4000/6000/8000 Enterprise Virtual Arrays, HP StorageWorks 4100 Enterprise Virtual Array, HP StorageWorks 6100 Enterprise Virtual Array, or HP StorageWorks 8100 Enterprise Virtual Array under EVA Disk Arrays. HP Command View EVA http://h18006.www1.hp - HP EVA4000/6000/8000 | HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array r - Page 9
requirements and support for 2 Gb and 4 Gb EVAs, see the HP StorageWorks SAN design reference guide, which can be downloaded from the following website: http://www.hp.com/support/manuals Click Storage Networking under Storage, and then select HP StorageWorks SAN under HP StorageWorks SAN - HP EVA4000/6000/8000 | HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array r - Page 10
groups, using HP Command View EVA or an equivalent command, to return to normal operations. HP recommends that you ensure the DR groups are not in a full copy state before upgrading to XCS 6.200. Changing the host port topology Before changing the topology settings of an array host port, physically - HP EVA4000/6000/8000 | HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array r - Page 11
the FC cable on the array or the switch. If the above recommendations do not correct the problem, it will be necessary to restart the controller to restore host port operation. You only need to restart the controller experiencing the host port problem. This can be done from HP Command View EVA as - HP EVA4000/6000/8000 | HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array r - Page 12
post operation. This can be done from HP Command View EVA as follows: 1. Open HP Command View EVA and click the icon of the appropriate storage system. You can select either an initialized or unintialized storage system. 2. On the Initialized Storage System Properties page, click Shut down. 3. Under - HP EVA4000/6000/8000 | HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array r - Page 13
table in chapter 5 of the HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array user guide. Table 4 Hardware component CSR support Description Disk drive - 1 TB Disk drive - 450 GB Assembly part number (non RoHS/RoHS) AG883-64201 AG804-64201 Spare part number (non RoHS/RoHS) CSR (before - HP EVA4000/6000/8000 | HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array r - Page 14
14
HP StorageWorks 4x00/6x00/8x00
Enterprise Virtual Array release notes
(XCS 6.200)
This document applies to the EVA4000/6000/8000 and EVA4100/6100/8100 models only.
Part number: 5697-0024
Fifth edition: May 2009