HP EZ320A4 User Manual
HP EZ320A4 Manual
 |
View all HP EZ320A4 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP EZ320A4 manual content summary:
- HP EZ320A4 | User Manual - Page 1
HP LP3065 30" LCD Monitor User Guide - HP EZ320A4 | User Manual - Page 2
© 2006 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and the Windows logo are trademarks of Microsoft Corporation in the U.S. and other countries. All other product names mentioned herein may be trademarks of their respective companies. Hewlett-Packard Company shall not be liable for - HP EZ320A4 | User Manual - Page 3
About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life - HP EZ320A4 | User Manual - Page 4
iv About This Guide ENWW - HP EZ320A4 | User Manual - Page 5
from the CD ...17 Downloading from the Worldwide Web 17 Front Panel Controls ...17 HP Display LiteSaver ...18 Installing the HP Display LiteSaver Software 18 Appendix A Troubleshooting Solving Common Problems ...20 Using the Worldwide Web ...21 Preparing to Call Technical Support 21 ENWW v - HP EZ320A4 | User Manual - Page 6
Appendix B Technical Specifications LP3065 Model ...22 Energy Saver Feature ...23 Appendix C Agency Regulatory Notices Federal Communications Commission Notice 24 Modifications ...24 Cables ...24 Declaration of Conformity for Products Marked - HP EZ320A4 | User Manual - Page 7
an HP speaker bar ● Plug and play capability if supported by your system ● Software and documentation CD that includes monitor driver software and product documentation ● Energy saver feature to meet requirements for reduced power consumption ● Compliant with the following regulated specifications - HP EZ320A4 | User Manual - Page 8
users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and/or on the documentation CD, if one is included with the monitor. CAUTION For the protection of the monitor, as well as the computer, connect all power cords for - HP EZ320A4 | User Manual - Page 9
this product yourself. Adjust only those controls that are covered in the operating instructions. If your monitor is not operating properly or has been dropped or damaged, contact your HP authorized dealer, reseller, or service provider. ● Use only a power source and connection appropriate for this - HP EZ320A4 | User Manual - Page 10
, and other attached devices, then follow the instructions below. NOTE Be sure the master power switch, located on the rear panel of the monitor, is in the off position. The master power switch turns off all power to the monitor. Installing the Monitor Pedestal Base NOTE Do not install the pedestal - HP EZ320A4 | User Manual - Page 11
USB Downstream Connectors Provides slot for use with cable security locks. Turns off all power to the monitor. Connects the AC power cord to the monitor. Connects the DVI-D signal cable to the monitor. Connects the monitor USB hub to a host USB port/hub. Connects optional USB devices to the - HP EZ320A4 | User Manual - Page 12
a highperformance video card that is capable of scaling all video modes to 2560 x 1600. The monitor does not support a VGA (analog) video signal input. Connect one of the DVI-D signal cables provided to the DVI-D connector on the monitor and the other end to the DVI-D connector on the computer. The - HP EZ320A4 | User Manual - Page 13
connector on the rear panel of the computer, and the other end to the upstream USB connector on the monitor. Figure 3-4 Connecting the USB Cable WARNING! To reduce the risk of electric shock or damage to the equipment the electrical outlet, grasp the cord by the plug. ENWW Connecting the Monitor 7 - HP EZ320A4 | User Manual - Page 14
3. Connect one end of the power cable to the AC power connector on the back of the monitor, and the other end to an electrical wall outlet. Figure 3-5 Connecting the Power Cable 4. Place the cables through the cable management channel on the back - HP EZ320A4 | User Manual - Page 15
Adjusting the Monitor 1. Adjust the monitor's panel forward or backward to set it to a comfortable eye level. Figure 3-7 Tilting the Monitor 2. Swivel the monitor to the left or right for the best viewing angle. Figure 3-8 Swiveling the Monitor ENWW Adjusting the Monitor 9 - HP EZ320A4 | User Manual - Page 16
is locked in the lowest height position, push down on the display head, press the button on the base to unlock, and then lift the monitor display head to the desired height. 10 Chapter 3 Setting Up the - HP EZ320A4 | User Manual - Page 17
USB Devices Using the Accessory Rails The monitor features accessory rails on the rear that may be used to mount optional devices, such as the HP speaker bar, to attach to the LCD. Refer to the documentation included with your optional device for detailed mounting instructions. ENWW Turning on the - HP EZ320A4 | User Manual - Page 18
on a wall, a swing arm, or other mounting fixture. CAUTION Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconnected. If your monitor has a connected audio cable, disconnect it. 1. Disconnect and remove the signal and power - HP EZ320A4 | User Manual - Page 19
mounting solution is compliant with the VESA standard and is rated to support the weight of the monitor display panel. For best performance, it is important to use the power and video cable provided with the monitor. 2. Remove the HP Quick Release from the pedestal base by removing the four screws - HP EZ320A4 | User Manual - Page 20
The Quick Release can also be installed directly to a wall to mount the monitor panel. It is designed to support a maximum of up to 24 lbs. (10.9 kg). If you are mounting to a wall, HP recommends that you consult with a qualified engineering, architectural, or construction professional to determine - HP EZ320A4 | User Manual - Page 21
the Rating Labels The rating labels on the monitor provide the spare part number, product number, and serial number. You may need these numbers when contacting HP about your monitor model. The rating labels are located on the rear panel of the monitor display head. Figure 3-16 Locating the Rating - HP EZ320A4 | User Manual - Page 22
model Adobe Reader is supplied on this CD and can be installed from the menu. NOTE If the monitor does not include a CD, the .INF and .ICM files can be downloaded from the HP monitors support Web site. See Downloading from the Worldwide Web in this chapter. The Information File The .INF file defines - HP EZ320A4 | User Manual - Page 23
from the HP monitors support Web site: 1. Refer to http://www.hp.com/support and select your country region. 2. Follow the links for your monitor to the support page and download page. 3. Ensure your system meets the requirements. 4. Download the software by following the instructions. Front Panel - HP EZ320A4 | User Manual - Page 24
NOTE The monitor does not support an On-Screen Display (OSD) menu. HP Display LiteSaver HP Display LiteSaver is a software application, available on the CD, that increases monitor life and saves energy. It allows you to place your monitor into its low power sleep mode at predefined times by - HP EZ320A4 | User Manual - Page 25
message in the system tray 1 minute before the monitor is turned off by HP Display LiteSaver. Status Shows the time until the monitor is next due to be turned off by HP Display LiteSaver. OK Stores the current settings and minimizes HP Display LiteSaver to the System Tray. Cancel Restores the - HP EZ320A4 | User Manual - Page 26
cable support Dual-Link DVI-D. Use only the DVI-D video cables signal must be set correctly. supplied with the monitor. Brightness is too high or Brightness adjustment is not Adjust the brightness setting using the- (Minus) and + buttons. low. set correctly. 20 Appendix A Troubleshooting ENWW - HP EZ320A4 | User Manual - Page 27
, online assistance, community forums of IT experts, broad mutlivendor knowledge base, monitoring and diagnostic tools, go to http://www.hp.com/support Preparing to Call Technical Support If you cannot solve a problem using the trouble shooting tips in this section, you may need to call technical - HP EZ320A4 | User Manual - Page 28
may vary either higher or lower. LP3065 Model Table B-1 LP3065 Specifications Display Type Viewable Image Size Tilt Swivel Maximum Weight (Unpacked) Dimensions (include base with height adjustment at lowest) Height Depth Width Supported Graphics Resolution Dot Pitch Horizontal Frequency Vertical - HP EZ320A4 | User Manual - Page 29
will utilize less than 2 watts of power. There is a brief warm up period before the monitor will return to its normal operating mode. Refer to your computer manual for instructions on setting energy saver features (sometimes called power management features). NOTE The above power saver feature only - HP EZ320A4 | User Manual - Page 30
. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - HP EZ320A4 | User Manual - Page 31
Hewlett Packard Company P. O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call 1-800-HP-INVENT (1-800 474-6836) For questions regarding this FCC declaration, contact: Hewlett Packard Company P. O. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Or, call ( - HP EZ320A4 | User Manual - Page 32
power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use in the country where your purchased the you have questions about the type of power cord to use, contact your HP authorized service provider. A power cord should be routed so that it is not likely - HP EZ320A4 | User Manual - Page 33
, please contact the local city office, the household waste disposal service or the shop where you purchased the product. Restriction of Hazardous Substances (RoHs) A Japanese regulatory requirement, defined by specification JIS C 0950, 2005, mandates that manufacturers provide Material Content
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
 |
 |
HP LP3065 30" LCD Monitor
User Guide