HP EliteDisplay S231d User Guide

HP EliteDisplay S231d Manual

Get HP EliteDisplay S231d PDF manuals and user guides View all HP EliteDisplay S231d manuals
Add to My Manuals
Save this manual to your list of manuals

HP EliteDisplay S231d manual content summary:

  • HP EliteDisplay S231d | User Guide - Page 1
    HP EliteDisplay S231d LED Backlit IPS Monitor User Guide
  • HP EliteDisplay S231d | User Guide - Page 2
    and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors
  • HP EliteDisplay S231d | User Guide - Page 3
    About This Guide This guide provides information on monitor features, setting up the monitor, and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life.
  • HP EliteDisplay S231d | User Guide - Page 4
    iv About This Guide ENWW
  • HP EliteDisplay S231d | User Guide - Page 5
    18 Webcam Troubleshooting ...19 4 Using HP MyRoom ...20 Installing HP MyRoom from the media disc 20 Downloading HP MyRoom from the Internet 20 Creating a HP MyRoom Account ...20 5 Locating Additional Information ...21 Product Support ...21 6 Technical Specifications ...22 EliteDisplay S231d ...22
  • HP EliteDisplay S231d | User Guide - Page 6
    S231d ...23 Entering User Modes ...24 Sleep Timer Utility ...24 vi ENWW
  • HP EliteDisplay S231d | User Guide - Page 7
    ) and four USB ports on the rear panel of the monitor ● USB cable provided to connect the monitor's USB hub to a USB connector on the computer ● 19V DC power cable provided for powering or charging your HP notebook (up to 90 watts) ● Supports an optional HP speaker bar ● Plug and play capability if
  • HP EliteDisplay S231d | User Guide - Page 8
    ● Energy saver feature to meet requirements for reduced power consumption ● Intelligent Management AssetControl ● Safety guidelines, certifications, and regulatory notices for this product are available in the HP LCD Monitors Reference Guide on the disc included with this model. 2 Chapter 1 Product
  • HP EliteDisplay S231d | User Guide - Page 9
    2 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. Unfolding the Monitor Pedestal Base 1. Lift the monitor from its box and place it face down on a flat surface. 2. Hold
  • HP EliteDisplay S231d | User Guide - Page 10
    an HP notebook computer for charging or powering the notebook (up to 90 watts). Connects the DisplayPort cable to the monitor. Connects a VGA cable to the monitor. This is a secondary graphics input and is only needed if connecting a desktop computer. Connects headphones or low wattage speakers to
  • HP EliteDisplay S231d | User Guide - Page 11
    outward on the two sides of the clip (1) then lifting the clip off the pedestal (2). 3. Connect one end of an Ethernet cable to the RJ-45 (network) jack on the monitor and the other end to an RJ-45 wall jack or router. 4. Connect peripheral USB devices to the USB ports on
  • HP EliteDisplay S231d | User Guide - Page 12
    power supply cord to the DC power IN connector on the back of the monitor. Connect the female end of the three-pronged power cord to the power anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging
  • HP EliteDisplay S231d | User Guide - Page 13
    refer to Connecting an HP Notebook Computer and Installing Drivers on page 9. NOTE: If you are connecting an HP notebook computer to the monitor using a USB cable, you do not need to connect the VGA cable or DisplayPort cable. OR Connect the DisplayPort cable between the monitor and computer. ENWW
  • HP EliteDisplay S231d | User Guide - Page 14
    speakers to the headphones jack. 8. Secure the cables in place with the cable management clip. Press the clip straight down on the curved neck of the pedestal ensuring that the tabs on the sides of the clip snap into the slots on the pedestal. Turning on the Monitor 1. Press the power button
  • HP EliteDisplay S231d | User Guide - Page 15
    's internal flash drive after connecting the notebook to the monitor. To install the drivers from the monitor's internal flash drive: 1. Turn on power to the monitor and the HP notebook computer. 2. Connect one end of the provided USB cable to a USB connector on the notebook computer, and the other
  • HP EliteDisplay S231d | User Guide - Page 16
    and click the arrow button. 4. Install the HP S231d Driver Software: 5. After the drivers are installed, connect one end of the provided USB cable to a USB connector on the notebook computer, and the other end to the upstream USB connector on the monitor as shown in the previous figure. NOTE: For
  • HP EliteDisplay S231d | User Guide - Page 17
    charging system supplies up to 90 watts of power. HP notebooks requiring more than 90 watts may not be charged by the system. Only HP notebooks are supported. To charge your HP notebook, connect one end of the supplied DC power cable to the power OUT connector on the monitor and the other end to the
  • HP EliteDisplay S231d | User Guide - Page 18
    on the monitor. Refer to Step 6 in Connecting the Monitor Cables on page 5. Front Panel Controls Table 2-1 Monitor Front Panel Controls Control 1 Microphone (2) 2 Webcam 3 Menu functions if the active video signal is VGA. 7 Power Turns the monitor on or off. 12 Chapter 2 Setting Up the
  • HP EliteDisplay S231d | User Guide - Page 19
    NOTE: To view an OSD menu simulator, visit the HP Customer Self Repair Services Media Library at http://www.hp.com/go/sml. Adjusting the Monitor Your monitor model may look different than the model in the following illustrations. 1. Tilt the monitor's panel forward or backward to set it to a
  • HP EliteDisplay S231d | User Guide - Page 20
    base and potentially cause damage to the monitor. If you are adding an optional speaker bar to the monitor, install it after pivoting the monitor. The speaker bar will come in contact with the base when pivoting and potentially cause damage to the monitor or speaker bar. 14 Chapter 2 Setting Up the
  • HP EliteDisplay S231d | User Guide - Page 21
    mode, you can install the HP Display Assistant software included on monitor, be sure the monitor is turned off and the power and signal cables are disconnected. Also disconnect all USB cables connected to the monitor. 1. Disconnect and remove all cords and cables from the monitor. 2. Lay the monitor
  • HP EliteDisplay S231d | User Guide - Page 22
    solution is compliant with the VESA standard and is rated to support the weight of the monitor display panel. For best performance, it is important to use the power and video cables provided with the monitor. 2. To attach the monitor to a swing arm, insert four 10mm screws through the holes on
  • HP EliteDisplay S231d | User Guide - Page 23
    to a fixed object with an optional cable lock available from HP. Locating the Rating Labels The rating labels on the monitor provide the spare part number, product number, and serial number. You may need these numbers when contacting HP about the monitor model. The rating labels are located on
  • HP EliteDisplay S231d | User Guide - Page 24
    the Webcam Install CyberLink YouCam software and driver from the media disc that came with your monitor. NOTE: USB connectivity between the monitor and PC is required for the webcam to operate. The webcam will not operate if you are using the VGA cable for the graphics interface. Use your webcam to
  • HP EliteDisplay S231d | User Guide - Page 25
    problem may come from webcam drivers or the software that's trying to use the webcam may have a problem. Before contacting HP: ● Download the latest drivers for your monitor model. ● Search the HP website for known webcam issues, program updates, and support articles. ENWW Webcam Troubleshooting
  • HP EliteDisplay S231d | User Guide - Page 26
    media disc that came with your monitor into the computer optical drive. 2. Select Install HP MyRoom and run the setup file. 3. Follow the instructions on the screen. Downloading HP MyRoom from the Internet To download HP MyRoom: 1. Go to https://www.rooms.hp.com/myroom. 2. Select language of your
  • HP EliteDisplay S231d | User Guide - Page 27
    Troubleshooting, and then enter your monitor model in the Find by product search field. Click Go. Product Support The monitor user guide, reference guide, and drivers are available at http://www.hp.com/ support. If the information provided in the guide or in the HP LCD Monitors Reference Guide
  • HP EliteDisplay S231d | User Guide - Page 28
    HP's component manufacturers; actual performance may vary either higher or lower. EliteDisplay S231d Table 6-1 EliteDisplay S231d Rate Environmental Requirements Temperature Operating Temperature Storage Temperature Relative Humidity Power Source: DC Altitude: Operating Storage 58.4 cm wide screen
  • HP EliteDisplay S231d | User Guide - Page 29
    EliteDisplay S231d Specifications (continued) Measured Power Consumption: Full Power Typical Settings Sleep Switch Off 60 watts 38 watts 2.2 watts 0.5 watts Input Terminals One USB upstream connector with cable included; one VGA connector (cable not included); one DisplayPort connector (cable
  • HP EliteDisplay S231d | User Guide - Page 30
    light is turned amber. When the monitor is in the reduced power state, the monitor will utilize 2 watts of power. There is a brief warm up period before the monitor will return to its normal operating mode. Refer to the computer manual for instructions on setting energy saver features (sometimes
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
HP EliteDisplay S231d LED Backlit IPS
Monitor
User Guide