HP EliteDisplay S240ml User Guide

HP EliteDisplay S240ml Manual

Get HP EliteDisplay S240ml PDF manuals and user guides View all HP EliteDisplay S240ml manuals
Add to My Manuals
Save this manual to your list of manuals

HP EliteDisplay S240ml manual content summary:

  • HP EliteDisplay S240ml | User Guide - Page 1
    HP EliteDisplay S240ml Monitor User Guide
  • HP EliteDisplay S240ml | User Guide - Page 2
    and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors
  • HP EliteDisplay S240ml | User Guide - Page 3
    About this guide This guide provides information on monitor features, setting up the monitor, and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions
  • HP EliteDisplay S240ml | User Guide - Page 4
    iv About this guide
  • HP EliteDisplay S240ml | User Guide - Page 5
    Installing a cable lock ...20 3 Using the webcam ...21 Installing YouCam from the disc ...21 Capturing webcam video and snapshots 21 Having a video chat or making conference calls 22 4 Using HP MyRoom ...23 Installing HP MyRoom from the disc 23 Downloading HP MyRoom from the Internet 23 Creating
  • HP EliteDisplay S240ml | User Guide - Page 6
    Product support ...26 Appendix A Technical specifications ...27 HP S240ml ...27 Recognizing preset display resolutions 28 HP S240ml ...28 Power adapter ...29 Entering user modes ...29 Energy saver feature ...29 vi
  • HP EliteDisplay S240ml | User Guide - Page 7
    angle panel. The monitor features include: ● 60.5-cm (23.8-inch) diagonal viewable area display with 1920 x 1080 resolution, plus full-screen support for lower resolutions; includes custom scaling for maximum image size while preserving original aspect ratio ● Ultra-slim bezel IPS monitor ● MHL
  • HP EliteDisplay S240ml | User Guide - Page 8
    included ● Integrated webcam and dual microphone array ● Integrated speakers ● Audio output headphone jack ● Supports Windows 7 and documentation disc that includes monitor drivers and product documentation ● Energy are available in the HP LCD Monitors Reference Guide on the disc included with
  • HP EliteDisplay S240ml | User Guide - Page 9
    set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, and then follow the instructions below. CAUTION: The screen is fragile. Avoid touching or applying pressure to the screen; doing so can cause damage. Attaching the monitor stand base
  • HP EliteDisplay S240ml | User Guide - Page 10
    4. Rotate the stand base upward so that the flat bottom of the stand riser is fully seated within the recess of the stand base (2). 5. Tighten the captive screw on the underside of the base to secure the base to the stand. 4 Chapter 2 Setting up and using the monitor
  • HP EliteDisplay S240ml | User Guide - Page 11
    6. Tilt the stand base cover and first insert the edge away from the stand (1), and then press the cover down to snap the cover into place (2). Attaching the monitor stand base 5
  • HP EliteDisplay S240ml | User Guide - Page 12
    the USB cable to the monitor's USB connector and to a host USB port/hub. NOTE: A USB connection between the monitor and computer is required for webcam functionality. Connects the USB cable or device to the monitor. 6 Chapter 2 Setting up and using the monitor
  • HP EliteDisplay S240ml | User Guide - Page 13
    Connecting the cables NOTE: Use only the video cable(s) included with the monitor. Connecting the cables may be easier if you first lay the monitor panel face down on a flat surface covered by a clean, dry cloth. 1. Rotate the bottom of the cable cover up (1) then slide out the top of the cover (2)
  • HP EliteDisplay S240ml | User Guide - Page 14
    2. Depending on your configuration, connect either the DisplayPort, HDMI, or VGA video cable between the source device and the monitor. NOTE: The video mode is determined by the video cable used. The monitor will automatically determine which inputs have valid video signals. The inputs can be
  • HP EliteDisplay S240ml | User Guide - Page 15
    ● For VGA analog operation, connect the VGA signal cable to the VGA connector on the rear of the monitor and the other end to the VGA connector on your input device (cable provided). 3. Connect the provided MHL cable to the MHL/HDMI connector on the side of the monitor and the other end of the cable
  • HP EliteDisplay S240ml | User Guide - Page 16
    computer, and the other end to the USB connector on the monitor. NOTE: You must connect the USB cable between the computer and monitor for webcam functionality. 5. Connect a USB device to a USB connector on the side of the monitor. 10 Chapter 2 Setting up and using the monitor
  • HP EliteDisplay S240ml | User Guide - Page 17
    6. Connect a headphone cable to the headphone jack on the side of the monitor. 7. Connect the provided audio cable to the audio input connector on the rear of the monitor and the other end to the audio output jack on your input device. Connecting the cables 11
  • HP EliteDisplay S240ml | User Guide - Page 18
    8. Plug the power cord into the power supply brick (1), and then connect the other end of the power cord to an electrical outlet (2). Plug the round end of the power supply cord into the power supply connector on the rear of the monitor (3). WARNING! To reduce the risk of electric shock or damage to
  • HP EliteDisplay S240ml | User Guide - Page 19
    , and health and work habits for computer users, and provides important electrical and mechanical safety information. The Safety & Comfort Guide is located on the HP website at http://www.hp.com/ergo. Adjusting the tilt Adjust the tilt to the desired position. To adjust the tilt upward, hold the top
  • HP EliteDisplay S240ml | User Guide - Page 20
    Adjusting the height Adjust the height to a comfortable position.To raise the monitor, hold the top of the monitor with two hands and lift the monitor up. To lower the monitor, hold the top of the monitor with two hands and push the monitor down. The monitor height range is 0 mm to 130 mm. 14
  • HP EliteDisplay S240ml | User Guide - Page 21
    of the monitor's bezel. Integrated into the top of the monitor's bezel. Indicates that the Webcam is active Opens, selects from, or exits the OSD menu. If the OSD menu is on OSD menu simulator, visit the HP Customer Self Repair Services Media Library at http://www.hp.com/go/sml. Front components 15
  • HP EliteDisplay S240ml | User Guide - Page 22
    period of time. Image retention is a condition that may occur on all LCD screens. Monitors with a "burned-in image" are not covered under the HP warranty. NOTE: If pressing the power button has no effect, the Power Button Lockout feature may be enabled. To disable this feature, press and hold
  • HP EliteDisplay S240ml | User Guide - Page 23
    per day that result in image retention damage are not covered under the HP warranty. To avoid image retention damage, always turn off the monitor when it is not in use or use the power management setting, if supported on your system, to turn off the display when the system is idle.
  • HP EliteDisplay S240ml | User Guide - Page 24
    4. Loosen the two captive screws that secure the stand to the display head. 5. Lift the base up after 45 degrees to disengage the stand (1), and then pull the stand off of the monitor (2). 18 Chapter 2 Setting up and using the monitor
  • HP EliteDisplay S240ml | User Guide - Page 25
    100 mm x 100 mm mounting pattern. NOTE: This apparatus is intended to be supported by a UL or CSA listed wall mount bracket. 1. Remove the monitor panel from . To attach the monitor to other mounting fixtures, follow the instructions included with the mounting fixture to ensure that the monitor is
  • HP EliteDisplay S240ml | User Guide - Page 26
    rating label The rating label on the monitor provides the spare part number, product number, and serial number. You may need these numbers when contacting HP about the monitor model. The rating label is located on the rear panel of the monitor behind the cable cover. Installing a cable lock You can
  • HP EliteDisplay S240ml | User Guide - Page 27
    webcam Install CyberLink YouCam software and driver from the disc that came with your monitor. If you do not have an optical disc drive, you may go to http://www.cyberlink.com/prog/support the setup file. 3. Follow the instructions on the screen. Capturing webcam video and snapshots To use CyberLink
  • HP EliteDisplay S240ml | User Guide - Page 28
    chat: 1. Download an Internet messenger or video phone call program. Make sure the person you are calling has compatible video-calling software. 2. Enable your webcam as the default video input. This is usually done through the video setup in the Tools menu in the software program you are using
  • HP EliteDisplay S240ml | User Guide - Page 29
    into the computer media drive. 2. Select Install MyRoom and run the setup file. 3. Follow the instructions on the screen. Downloading HP MyRoom from the Internet To download HP MyRoom: 1. Go to https://www.rooms.hp.com/myroom. 2. Select language of your choice in the upper right-hand corner of the
  • HP EliteDisplay S240ml | User Guide - Page 30
    5 Using mobile high-definition link (MHL) MHL is used to transmit a mirrored image of an attached smart phone or tablet to the monitor while also recharging the device battery. The smart phone or tablet must be attached using the supplied MHL cable. NOTE: The mobile device must be a certified MHL
  • HP EliteDisplay S240ml | User Guide - Page 31
    NOTE: The entire screen is dedicated to the MHL device and cannot be shared with any other video source. a. To change the input source to HDMI/MHL if another video connection is active, press and select MHL. b. If no signal or picture appears, turn the monitor off and then on again. Screen
  • HP EliteDisplay S240ml | User Guide - Page 32
    common problems Product support For additional information on using your monitor, go to http://www.hp.com/support. Select your country or region, select Troubleshooting, and then enter your model in the search window and click the Go button. NOTE: The monitor user guide, reference guide, and drivers
  • HP EliteDisplay S240ml | User Guide - Page 33
    A Technical specifications NOTE: All specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower. HP S240ml Viewable Image Size 60.5-cm diagonal 23.8-inch diagonal Maximum Weight (Unpacked) 6.6 kg 14.55 lbs
  • HP EliteDisplay S240ml | User Guide - Page 34
    set as factory defaults. This monitor automatically recognizes these preset modes and they will appear properly sized and centered on the screen. HP S240ml Table A-1 Factory preset modes Preset Pixel format Horz freq (kHz) 1 640 × 480 31.469 2 720 × 400 31.469 3 800 × 600 4 1024 × 768
  • HP EliteDisplay S240ml | User Guide - Page 35
    user modes that can be entered and stored. Energy saver feature The monitors support a reduced power state. The reduced power state will be entered into to its normal operating mode. Refer to the computer manual for instructions on setting energy saver features (sometimes called power management
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
HP EliteDisplay S240ml Monitor
User Guide