HP Envy 17t-1000 HP ENVY 17 - Maintenance and Service Guide
HP Envy 17t-1000 Manual
View all HP Envy 17t-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Envy 17t-1000 manual content summary:
- HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 1
HP ENVY 17 Maintenance and Service Guide - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 3
to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The device and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950). ENWW iii - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 4
iv Safety warning notice ENWW - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 5
Front components ...11 Left-side components ...12 Right-side components ...14 Bottom components ...15 3 Illustrated parts catalog 16 Service tag ...17 Computer major components 18 Display assembly subcomponents 22 Plastics Kit ...23 Mass storage devices ...24 Miscellaneous parts ...25 Sequential - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 6
Component replacement procedures 35 Service tag ...35 Computer feet ...36 Battery ...37 Primary Specifications ...82 Computer specifications ...82 17.3-inch, WVA, FHD, LED AntiGlare display specifications 83 17.3-inch, SVA, HD+, LED AntiGlare display specifications 84 Hard drive specifications - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 7
External monitor ...94 HDMI ...95 RJ-45 (network) ...96 Universal Serial Bus ...96 9 Power cord set requirements 97 Requirements for all countries 97 Requirements for specific countries and regions 98 10 Recycling ...99 Battery ...99 Display ...99 Index ...105 ENWW vii - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 8
viii ENWW - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 9
Name Processors Chipset Graphics Description HP ENVY 17 Intel® Quad Core™ processors (support Intel Turbo Boost Technology): ● Intel Quad Core i7-840QM 1.86-GHz processor (SC turbo up to 3.20-MHz), 8-MB L3 cache, 1333-MHz front side bus (FSB), 45-W ● Intel Quad Core i7-820QM 1.73-GHz processor (SC - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 10
display; typical brightness: 300 nits 17.3-in, SVA high-definition+ (HD+), LED, AntiGlare (1600×900, 6 mm) display; typical brightness: 200 nits All display assemblies include 2 wireless local area network (WLAN) antenna cables Supports flush display panel cover Supports 16:9 ultra wide aspect ratio - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 11
dual-array digital microphones with beam-forming, echo-cancellation, noise-suppression software HD audio Beats audio Supports Microsoft Premium Requirements Integrated HP triple bass reflex subwoofer HP ENVY HD webcam (fixed, no tilt) with activity LED, 1280×800 by 24 frames per second ENWW - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 12
1000 GB network interface card (NIC) Integrated wireless local area network (WLAN) options by way of wireless module: Two WLAN antennas built into display assembly Support design with eject icon Supports Multitouch gestures (enabled by default) Taps enable by default 120-W HP Smart Adapter and 65-W - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 13
cable slot Operating system Preinstalled: ● Windows® 7 Home Premium 64 ● Windows 7 Professional 64 ● Windows 7 Ultimate ● Linux embedded HP QuickWeb Serviceability End-user replaceable parts: ● AC adapter ● Battery ● Hard drive (primary and secondary) ● RTC battery ● WLAN module ● Memory modules - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 14
2 External component identification Top components Display components Item (1) (2) (3) (4) Component WLAN antennas (2)* Internal microphones (2) Webcam light Webcam Description Send and receive wireless signals to communicate with wireless local area networks. Record sound. On: The webcam is in - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 15
Environmental Notices that applies to your country or region. These notices are located in Help and Support. Button Component Power button* ENWW Description ● When the computer is off, press the button and Security > Power Options, or refer to the HP Notebook Reference Guide. Top components 7 - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 16
Keys Item (1) (2) (3) (4) (5) (6) (7) Component esc key fn key Windows logo key Action keys Windows applications key Integrated numeric keypad Optical drive eject key Description Displays system information when pressed in combination with the fn key. Executes frequently used system functions - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 17
Lights Item (1) Component TouchPad off indicator (2) Caps lock light (3) Power light (4) Mute light (5) Wireless light Description ● Amber: The TouchPad is off. ● Off: The TouchPad is on. ● White: Caps lock is on. ● Off: Caps lock is off. ● White: The computer is on. ● Blinking white: The - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 18
TouchPad Item (1) Component TouchPad off indicator (2) Left TouchPad button (3) Right TouchPad button (4) TouchPad zone Description Turns the TouchPad on and off. Quickly double-tap the TouchPad off indicator to turn the TouchPad on and off. Functions like the left button on an external - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 19
Hibernation. ● Blinking white: The hard drive is being accessed. ● Amber: HP ProtectSmart Hard Drive Protection has temporarily parked the hard drive. NOTE: For information on HP ProtectSmart Hard Drive Protection, refer to the HP Notebook Reference Guide. Produce sound. ENWW Front components 11 - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 20
Left-side components Item (1) Component Vent (2) External monitor port (3) RJ-45 (network) jack (4) Mini DisplayPort (5) HDMI port (6) eSATA/USB port (7) SuperSpeed USB port Description Enables airflow to cool internal components. NOTE: The computer fan starts up automatically to cool - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 21
Item (8) (9) Component Audio-out (headphone) jack/Audio-in (microphone) jack Audio-out (headphone) jack Description Produces sound when connected to optional powered stereo speakers, headphones, earbuds, a headset, or television audio. Also connects an optional headset microphone. WARNING! To - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 22
Right-side components Item (1) (2) Component USB ports (2) Digital Media Slot (3) Optical drive (4) Battery light (5) Power connector (6) Security cable slot Description Connect optional USB devices. ● Memory Stick ● Memory Stick Pro ● MultiMediaCard ● Secure Digital Memory Card ● Secure - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 23
Bottom components Item (1) (2) Component Subwoofer Battery bay (3) Vents (7) (4) Hard drive bay (5) Memory module compartment (6) Battery release latch Description Contains the subwoofer speaker. Holds the battery. NOTE: The battery is preinstalled in the battery bay at the factory. - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 24
3 Illustrated parts catalog 16 Chapter 3 Illustrated parts catalog ENWW - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 25
each product. This number provides specific information about the product's hardware components. The part number helps a service technician determine what components and parts are needed. This is the alphanumeric identifier used to locate documents, drivers, and support for the computer. This number - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 26
Computer major components 18 Chapter 3 Illustrated parts catalog ENWW - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 27
number Display assembly (includes display panel cable, webcam/microphone module and cable, and 2 wireless antenna cables and transceivers): 17.3-in AG, FG, FHD 603774-001 17.3-in AG, FG, HD 603773-001 NOTE: See Display assembly subcomponents on page 22 for more display component information - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 28
10) (11) (12) (13) (14) (15) (16) (17) (18) Description Plastics Kit, includes: Hard drive cover memory module compartment cover Processor (includes replacement thermal material): Intel Core i7-820QM 1.73-GHz (SC turbo up to 3.06-GHz), 45W processor Intel Core i7-720QM 1.60-GHz (SC turbo up to 2.80 - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 29
Item (19) Description Spare part number 2-GB 598856-001 WLAN module: Broadcom 43224 802.11a/b/g/n 2x2 WiFi Adapter for use in Antigua and Barbuda, Barbados, Belize, Canada, the Cayman Islands, Guam, Puerto Rico, Trinidad and Tobago, the U.S. Virgin Islands, and the United States 582564-001 - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 30
Display assembly subcomponents Item (1) (2) (3) (4) (5) (6) (7) Description Webcam/microphone module Bluetooth module Display Cable Kit (includes display panel cable, Bluetooth module cable, and webcam/microphone module cable) Display hinge covers (2) Display Hinge Kit (includes left and right - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 31
Plastics Kit Item (1) (2) Description Plastics Kit, includes: memory module compartment cover (includes 2 captive screws, secured by C-clips) Hard drive cover (includes 2 captive screws, secured by C-clips) Spare part number 603795-001 ENWW Plastics Kit 23 - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 32
Mass storage devices Item (1) (2) (3) Description Optical drive: Blu-ray ROM DVD±RW Super Multi Double-Layer Drive DVD±RW and CD-RW Super Multi Double-Layer Combo Drive Hard drive (includes hard drive brackets and hard drive cables): Primary hard drive Secondary hard drive 640-GB, 7200-rpm 500-GB, - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 33
Miscellaneous parts Description 120-W HP Smart AC adapter (PFC RC/V 3-wire) Power cord: For use in Australia For use in Brazil For use in Denmark For use in Europe, the - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 34
Sequential part number listing Spare part number 409371-001 409371-011 409371-021 409371-031 409371-061 409371-081 409371-111 409371-202 409371-AA1 409371-AD1 409371-D61 537921-001 572509-001 572510-001 582564-001 582564-002 Description Power cord for use in the United States and Canada Power cord - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 35
Description Intel Core i7-820QM 1.73-GHz (SC turbo up to 3.06-GHz), 45W processor (includes replacement thermal material) Intel Core i7-720QM 1.60-GHz microphone module and cable, and 2 wireless antenna cables and transceivers): 17.3-in AG, FG, FHD display assembly (includes display panel cable, - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 36
Spare part number 603789-001 603790-001 603791-001 603791-031 603791-041 603791-051 603791-061 603791-071 603791-121 603791-131 603791-201 603791-251 603791-281 603791-291 603791-A41 603791-AD1 603791-B31 603791-BG1 603791-DH1 603792-001 603793-001 603794-001 603795-001 603796-001 603797-001 603798- - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 37
-001 609941-001 617348-001 Description USB/Card Reader board (includes cable) Fan/heat sink assembly for use only with Intel Core i7, 45-W processors (includes replacement thermal material) 120-W HP Smart AC adapter (PFC RC/V 3-wire) Power connector cable ENWW Sequential part number listing 29 - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 38
plastic parts. Use care when handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions. Cables and connectors CAUTION: When servicing the computer, be sure that cables are placed in their proper locations during the reassembly process. Improper cable - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 39
Drive handling CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the computer, damage to a drive, or loss of information, observe these precautions: Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the computer is - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 40
CAUTION: To prevent damage to the computer when you are removing or installing internal components, observe these precautions: Keep components in their electrostatic-safe containers until you are ready to install them. Before touching an electronic component, discharge static electricity by using - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 41
material. ● Use a wrist strap connected to a properly grounded work surface and use properly grounded tools and equipment. ● Use conductive field service tools, such as cutters, screwdrivers, and vacuums. ● When fixtures must directly contact dissipative surfaces, use fixtures made only of static - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 42
with ground cords of one megohm resistance ● Static-dissipative tables or floor mats with hard ties to the ground ● Field service kits ● Static awareness labels ● Material-handling packages ● Nonconductive plastic bags, tubes, or boxes ● Metal tote boxes ● Electrostatic voltage levels and - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 43
front of the computer. This is an alphanumeric identifier that is unique to each product. This number provides specific information about the product's hardware components. The part number helps a service technician determine what components and parts are needed. Component replacement procedures 35 - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 44
Item (4) (5) Component Model description Warranty period Description This is the alphanumeric identifier used to locate documents, drivers, and support for the computer. This number describes the duration of the warranty period for the computer. Computer feet The computer feet are adhesive-backed - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 45
Battery Description 9-cell, 93-Wh, 2.8-Ah, Li-ion battery 6-cell, 62-Wh, 2.8-Ah, Li-ion battery Spare part number 593550-001 593562-001 Before disassembling the computer, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 46
Primary hard drive NOTE: The hard drive spare part kit includes a hard drive bracket and hard drive connector cable. Description Spare part number 640-GB, 7200-rpm 603786-001 500-GB, 7200-rpm 603784-001 320-GB, 7200-rpm 603783-001 1-TB, 5400-rpm 603788-001 750-GB, 5400-rpm 603787-001 - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 47
2. Pivot the front edge of the hard drive cover upward. 3. Remove the hard drive cover. The hard drive cover is included in the Plastics Kit, spare part number 603795-001. 4. Disconnect the primary hard drive cable from the system board. 5. Use the Mylar tabs to remove the primary hard drive from - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 48
7. Lift the primary hard drive bracket straight up (2) and remove the bracket from the hard drive. 8. If it is necessary to replace the primary hard drive isolators, disconnect the isolators from the hard drive bracket. The primary hard drive bracket and isolators are included in the Hard Drive - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 49
RTC battery Description RTC battery Spare part number 602745-001 Before removing the RTC battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 50
Memory module Description 4-GB (PC3, 10600, 1333-MHz) 2-GB (PC3, 10600, 1333-MHz) Spare part number 599092-001 598856-001 Before removing a memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 51
5. Remove the memory module (2) by pulling it away from the slot at an angle. NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the memory module slot. Reverse this procedure to install a memory module. ENWW Component replacement procedures 43 - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 52
Secondary hard drive NOTE: The hard drive spare part kit includes a hard drive bracket and hard drive connector cable. Description Spare part number 640-GB, 7200-rpm 603786-001 500-GB, 7200-rpm 603784-001 320-GB, 7200-rpm 603783-001 1-TB, 5400-rpm 603788-001 750-GB, 5400-rpm 603787-001 - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 53
Remove the secondary hard drive: 1. Disconnect the secondary hard drive cable from the system board, and then release the cable from the clips and routing channel built into the base enclosure. 2. Remove the four Phillips PM2.5×6.0 screws that secure the secondary hard drive to the computer. 3. - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 54
4. Remove the secondary hard drive (2) by sliding it up and away from the computer at an angle. 5. If it is necessary to replace the secondary hard drive bracket, remove the four Phillips PM3.0×3.0 screws (1) that secure the bracket to the secondary hard drive. 6. Lift the secondary hard drive - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 55
7. If it is necessary to replace the secondary hard drive connector cable, disconnect the cable from the hard drive. The secondary hard drive bracket and secondary hard drive connector cable are included in the Hard Drive Hardware Kit, spare part number 603772-001. Reverse this procedure to - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 56
country or region. If you replace the module and then receive a warning message, remove the module to restore device functionality, and then contact technical support. Before removing the WLAN module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 57
Remove the WLAN module: 1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module. NOTE: The 1/black WLAN antenna cable is connected to the WLAN module 1/Main terminal. The 2/gray WLAN antenna cable is connected to the WLAN module 2/Aux terminal. 2. Remove the two Phillips PM2 - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 58
Keyboard NOTE: The keyboard spare part kit includes a keyboard cable and a keyboard light cable. Description For use in Belgium For use in Brazil For use in Denmark, Finland, and Sweden For use in France For use in French Canada For use in Germany For use in Italy For use in Japan For use in the - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 59
Remove the keyboard: 1. Remove the three Phillips PM 2.5×5.0 screws (1) and the Phillips PM 2.5×7.0 (2) screw that secure the keyboard to the computer. 2. Lift the rear edge of the keyboard (1) until it rests at an angle. 3. Slide the keyboard (2) toward the display until the tabs on the front edge - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 60
5. Release the ZIF connector (3) to which the keyboard light cable is attached, and then disconnect the keyboard light cable (2) from the system board. 6. Remove the keyboard. Reverse this procedure to install the keyboard. Top cover Description Top cover (includes TouchPad and cable) Spare part - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 61
3. Remove the eight Phillips PM2.5×8.0 screws (2) that secure the top cover to the computer. 4. Remove the three Phillips PM2.5×5.0 screws (3) that secure the top cover to the computer in the battery bay. 5. Turn the computer display-side up, with the front toward you. 6. Open the computer as far - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 62
11. Remove the top cover (2). Reverse this procedure to install the top cover. 54 Chapter 4 Removal and replacement procedures ENWW - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 63
Power button board Description Power button board (includes cable) Spare part number 603794-001 Before removing the power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 64
USB/Card Reader board Description USB/Card Reader board (includes cable) Spare part number 604064-001 Before removing the USB/Card Reader board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 65
4. Remove the USB/Card Reader board (4). Reverse this procedure to install the USB/Card Reader board. Optical drive NOTE: The optical drive spare part kit includes a optical drive bracket. Description Blu-ray ROM DVD±RW Super Multi Double-Layer Drive DVD±RW and CD-RW Super Multi Double-Layer Combo - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 66
Remove the optical drive: 1. Remove the three Phillips PM2.5×5.0 screws (1) that secure the optical drive to the computer. 2. Slide the optical drive (2) to the right to disconnect it from the system board. 3. Remove the optical drive (3) by lifting it straight up. Reverse this procedure to install - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 67
Power connector cable Description Power connector cable Spare part number 617348-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 68
System board Description System board (includes 1 GB of discrete graphics subsystem memory and replacement thermal material) Spare part number 603771-001 Before removing the system board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 69
Remove the system board: 1. Disconnect the following cables from the system board: (1) Bluetooth module cable (2) Display panel cable (3) USB/Card Reader board cable (4) Speaker cable ENWW Component replacement procedures 61 - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 70
2. Disconnect the subwoofer cable (1) and the power connector cable (2) from the system board. 3. Remove the two Phillips PM2.5×5.0 screws that secure the system board to the base enclosure. 4. Use the optical drive connector (1) to lift the right side of the system board (2) until it rests at an - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 71
5. Remove the system board (3) by sliding it up and to the right at an angle. Reverse this procedure to install the system board. ENWW Component replacement procedures 63 - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 72
Fan/heat sink assembly NOTE: The fan/heat sink assembly spare part kit includes replacement thermal material. Description For use only with Intel Core i7, 45-W processors For use only with Intel Core i5, 35-W processors Spare part number 608650-001 603799-001 NOTE: To properly ventilate the - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 73
is removed: ● Thermal paste is used on the processor (1) and the heat sink section (2) that services it ● Thermal pads are used on the graphics subsystem chip (3) and the heat sink section (4) that services it ● Thermal pads are used on the system board capacitors (5) and the heat sink section - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 74
Processor NOTE: The processor spare part kit includes replacement thermal material. Description Intel Core i7-820QM 1.73-GHz (SC turbo up to 3.06-GHz), 45-W processor Intel Core i7-720QM 1.60-GHz (SC turbo up to 2.80-GHz), 45-W processor Intel Core i5-540M 2.53-GHz (SC turbo up to 3.06-GHz), 35-W - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 75
2. Lift the processor (2) straight up, and remove it. NOTE: The gold triangle (3) on the processor must be aligned with the triangle icon (4) embossed on the processor socket when you install the processor. Reverse this procedure to install the processor. ENWW Component replacement procedures 67 - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 76
Speakers Description Spare part number Before removing the speakers, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 77
Subwoofer Description Subwoofer (includes cable) Spare part number 603800-001 Before removing the subwoofer, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 78
assembly spare part kit includes a display panel cable, webcam/microphone module and cable, and 2 wireless antenna cables and transceivers. Description 17.3-in AG, FG, FHD 17.3-in AG, FG, HD Spare part number 603774-001 603773-001 Before removing the display assembly, follow these steps: 1. Shut - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 79
the wireless antenna cables from the clips built into the base enclosure (5) and subwoofer (6). CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. 5. Remove - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 80
7. If it is necessary to replace the display enclosure or any of the display assembly internal components: a. Remove the Mylar screw covers (1). The screw covers are included in the Display Screw Kit, spare part number 603776-001. b. Remove the two Phillips PM2.5×5.0 screws (2) that secure the - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 81
8. If it is necessary to replace the webcam/microphone module: a. Remove the Phillips PM2.0×4.0 screw (1) that secures the webcam/microphone module to the display bezel. b. Release the webcam/microphone module (2) as far as the webcam/microphone module allows. c. Disconnect the webcam/microphone - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 82
The Bluetooth module is available using spare part number 537921-001. 10. If it is necessary to replace the display panel cable: a. Release the support strip (1) that secures the display panel cable to the display panel. b. Release the display panel cable from the clips (2) and routing channel built - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 83
11. If it is necessary to replace the display hinges and hinge covers: a. Remove the two Phillips PM2.0×4.0 screws (1) that secure the hinge covers to the display bezel. b. Remove the hinge covers (2). c. Remove the six Phillips PM2.5×5.0 screws (1) that secure the hinges to the display panel. d. - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 84
12. If it is necessary to replace the wireless antenna cables and transceivers: a. Release the wireless antenna cables from the clips and routing channel built into the display enclosure. b. Release the two pieces of tape that secure the wireless antenna cables to the display enclosure. c. Release - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 85
5 Setup Utility (BIOS) Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utility includes settings for the types of peripherals installed, the startup - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 86
Navigating and selecting in Setup Utility Because Setup Utility is not Windows based, it does not support the TouchPad. Navigation and selection are by keystroke. ● To choose a menu or a menu item, use the arrow keys. ● To choose an item in a list or - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 87
the BIOS may be available on the HP Web site. Most BIOS updates on the HP Web site are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file. Determining the BIOS version To - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 88
1. Access the page on the HP Web site that provides software for your computer: Windows 7-Select Start > Help and Support > Maintain. Windows XP-Select Start > Help and Support, and then select the software and drivers update. 2. Follow the on-screen instructions to identify your computer and access - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 89
NOTE: After a message on the screen reports a successful installation, you can delete the downloaded file from your hard drive. ENWW Updating the BIOS 81 - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 90
6 Specifications Computer specifications 416 275 31.7 38.7 3710 8.16 Dimensions Width Depth Height (front to back) Weight Input power Operating voltage Operating current half-sine 200 g, 2 ms, half-sine 0.75 g zero-to-peak, 10 Hz to 500 Hz, 0.25 oct/min sweep rate 82 Chapter 6 Specifications ENWW - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 91
specify thermal limits for plastic surfaces. The computer operates well within this range of temperatures. 17.3-inch, WVA, FHD, LED AntiGlare display specifications Dimensions Width Depth Diagonal Number of colors Contrast ratio Brightness Backlight Character display Total power consumption - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 92
.3-inch, SVA, HD+, LED AntiGlare display specifications Dimensions Width Depth Diagonal Number of colors Contrast ratio Brightness Backlight Character display Total power consumption Viewing angle Metric U.S. 24.83 cm 9.78 in 38.77 cm 15.26 in 43.96 cm 17.31 in Up to 16.8 million, 45 to 60 - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 93
5°C to 55°C (41°F to 131°F) *1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications may differ slightly. NOTE: Certain restrictions and exclusions apply. Contact technical support for details. ENWW Hard drive - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 94
Blu-ray ROM DVD±RW Super Multi Double-Layer Drive specifications Applicable disc Access time Random Cache buffer Data transfer rate 2X BD-RAM 8X DVD 16X CD-R 16X CD-RW Read: -ROM BD < 230 ms 4.5 MB DVD < 180 ms 9 MB/sec 2,400 KB/sec 2,400 KB/sec 2,400 KB/sec 86 Chapter 6 Specifications ENWW - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 95
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive specifications Applicable disc Access time Random Cache buffer Data transfer rate 24X CD-ROM 8X DVD 24X CD-R 16X CD-RW 8X 2,700 KB/sec 6,750 KB/sec Multiword DMA Mode ENWW DVD±RW and CD-RW Super Multi Double-Layer Combo Drive specifications 87 - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 96
a reasonably current backup. Tools provided by the operating system and HP Recovery Manager software are designed to help you with the following tasks your information ● Creating system restore points ● Recovering a program or driver ● Performing a full system recovery (from the partition or recovery - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 97
separately) to create recovery discs, or you can purchase recovery discs for your computer from the HP Web site. If you use an external optical drive, it must be connected directly to a USB > Recovery Manager > Recovery Disc Creation. 2. Follow the on-screen instructions. ENWW Recovery discs 89 - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 98
is displayed at the bottom of the screen. Then, press f11 while the "F11 (HP Recovery)" message is displayed on the screen. 2. Click System Recovery in the Recovery Manager window. 3. Follow the on-screen instructions. Recovering using the recovery discs 1. If possible, back up all personal files - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 99
create a backup: 1. Select Start > Control Panel > System and Security > Backup and Restore. 2. Follow the on-screen instructions to schedule and create a backup. NOTE: Windows includes the User Account Control feature to improve the security of the computer. You may be prompted for your permission - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 100
you to save and name a snapshot of your hard drive at a specific point in time. You can then recover back to that point if , click System Protection. 3. Click the System Protection tab. 4. Follow the on-screen instructions. Restore to a previous date and time To revert to a restore point (created at - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 101
8 Connector pin assignments Audio-in (microphone) Pin 1 2 3 Audio-out (headphone) Signal Audio signal in Audio signal in Ground Pin Signal 1 Audio out, left channel 2 Audio out, right channel 3 Ground ENWW Audio-in (microphone) 93 - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 102
External monitor Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Signal Red analog Green analog Blue analog Not connected Ground Ground analog Ground analog Ground analog +5 VDC Ground Monitor detect DDC 2B data Horizontal sync Vertical sync DDC 2B clock 94 Chapter 8 Connector pin assignments ENWW - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 103
HDMI Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ENWW Signal TMDS data 2+ TMDS data 2 shield TMDS data 2- TMDS data 1+ TMDS data 1 shield TMDS data 1- TMDS data 0+ TMDS data 0 shield TMDS - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 104
RJ-45 (network) Pin 1 2 3 4 5 6 7 8 Universal Serial Bus Signal Transmit + Transmit Receive + Unused Unused Receive Unused Unused Pin Signal 1 +5 VDC 2 Data 3 Data + 4 Ground 96 Chapter 8 Connector pin assignments ENWW - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 105
9 Power cord set requirements The wide-range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts AC, or from 220 to 240 volts AC The 3-conductor power cord set included with the computer meets the requirements for use in the country or region where the - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 106
Requirements for specific countries and regions Country/region Accredited agency Applicable note number Australia EANSW 1 Austria OVE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMKO 1 Finland FIMKO 1 France UTE 1 Germany - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 107
these components, handle them carefully. NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display assembly that NOTE: The procedures provided in this chapter are general disassembly instructions. Specific details, such as screw sizes, quantities, and locations, - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 108
Perform the following steps: 1. Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly. 2. Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel disengages from the display - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 109
4. Disconnect all display panel cables (1) from the display inverter and remove the inverter 2. 5. Remove all screws (1) that secure the display panel assembly to the display enclosure. 6. Remove the display panel assembly (2) from the display enclosure. 7. Turn the display panel assembly upside - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 110
10. Remove the display panel frame (2) from the display panel. 11. Remove the screws (1) that secure the backlight cover to the display panel. 12. Lift the top edge of the backlight cover (2) and swing it outward. 13. Remove the backlight cover. 14. Turn the display panel right-side up. 102 Chapter - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 111
15. Remove the backlight cables (1) from the clip (2) in the display panel. 16. Turn the display panel upside down. 17. Remove the backlight frame from the display panel. WARNING! The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging this - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 112
18. Remove the backlight from the backlight frame. 19. Disconnect the display cable (1) from the LCD panel. 20. Remove the screws (2) that secure the LCD panel to the display rear panel. 21. Release the LCD panel (3) from the display rear panel. 22. Release the tape (4) that secures the LCD panel to - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 113
components 15 button component 7 buttons power 7 TouchPad 10 C cables, service considerations 30 caps lock light 9 chipset, product description 1 components removal 52 spare part number 36, 52 computer part number 17, 35 computer specifications 82 connector pinout audio-in jack 93 audio-out jack 93 - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 114
connector pinout 93 location 13 mini DisplayPort 12 model description 17, 36 model name 1 monitor port connector pinout 94 location 28, 57 specifications 86, 87 optical drive eject key 8 P packaging guidelines 33 part number listing, sequential 26 plastic parts, service considerations 30 Plastics - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 115
considerations cables 30 connectors 30 plastic parts 30 service tag 17, 35 serviceability, product description 5 solid-state drive, spare part number 20, 24, 27, 38, 44 speakers location 11 removal 68 spare part number 20, 28, 68 specifications Blu-ray ROM DVD±RW Super Multi Double-Layer Drive - HP Envy 17t-1000 | HP ENVY 17 - Maintenance and Service Guide - Page 116
HP ENVY 17
Maintenance and Service Guide