HP Hx2790b HP iPAQ hx2000 series Pocket PC - User's Guide - Page 98
Powering Wi-Fi On or Off, Today, iPAQ Wireless, Wi-Fi
UPC - 882780110014
View all HP Hx2790b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Using Wi-Fi (not available on all models) Powering Wi-Fi On or Off To use Wi-Fi on your HP iPAQ, you need to turn on Wi-Fi and set up your device. Note: The Wi-Fi antenna for the HP iPAQ is located in the top of the device. If you cover up the top of the HP iPAQ after you have turned on Wi-Fi, signal strength may be affected. To turn the Wi-Fi on or off: 1. From the Today screen, tap the iPAQ Wireless icon ( ) in the Command bar located at the bottom of the screen. 2. Tap the Wi-Fi button. When Wi-Fi is powered on, the Wi-Fi icon on the iPAQ Wireless screen turns from gray to amber, and the Wi-Fi light-emitting diode (LED), located on the top left corner of the device, flashes blue indicating one or more radios are on. When a wireless connection is made, the Wi-Fi icon on the iPAQ Wireless screen turns from amber to green. Note: Even though the LED flashes blue to indicate Wi-Fi is turned on, it does not necessarily mean a connection has been established with another device or access point. If Wi-Fi is off, the Wi-Fi icon turns from green or amber to gray. Note: Some Access Points and networks do not support one or more of the power saving modes that are available. If you cannot connect with a particular wireless network, try turning off the Wi-Fi Power Save modes. User's Guide 8-2