HP Integrity Superdome 2 16-socket Minimum Firmware Versions for HP Integrity

HP Integrity Superdome 2 16-socket Manual

HP Integrity Superdome 2 16-socket manual content summary:

  • 1
  • 2

Minimum Firmware Versions
for HP Integrity Add-On
Memory
© Copyright 2013 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
*5900-2674*
HP Part Number: 5900-2674
Published: August 2013
Overview
Minimum software and firmware versions are required
for optimal memory reliability before installing add-on
memory. Verify that you are using the minimum
required versions of software and firmware listed
below for your server and memory before installation
to achieve the best memory reliability.
Use the table below to determine your current firmware
version.
Command
Server
From the OA CLI:
Superdome 2 CB900s i4
Server Blades
OA> show update
firmware
From the UEFI Shell prompt:
UEFI> info fw
BL8x0c i4 Server Blades or
rx2800
/rx2900
i4 Servers
HP Integrity Superdome 2 CB900s i4
Server Blades
The following memory products:
AT127A 32GB PC3L-10600R Memory Quad (4
x 8GB DIMMs)
AT129A 32GB PC3L-10600R iCAP Memory
Quad (4 x 8GB DIMMs)
AT128A 64GB PC3L-10600R Memory Quad (4
x 16GB DIMMs)
AT130A 64GB PC3L-10600R iCAP Memory
Quad (4 x 16GB DIMMs)
Required firmware bundle 3.7.60 or later available
from
hp
.co
m/go/hp
s
c
.
HP Integrity BL860c i4, BL870c i4, and
BL890c i4 Server Blades
The following memory products:
AM386A 8GB PC3L-10600R Memory Pair (2 x
4GB DIMMs)
AM387A 16GB PC3L-10600R Memory Pair (2
x 8GB DIMMs)
AM388A 32GB PC3L-10600R Memory Pair (2
x 16GB DIMMs)
Required system firmware version 44.01 or later
available from
hp
.co
m/go/hp
s
c
and the