HP Integrity Superdome 2 16-socket HP Smart Update Manager 5.1 User Guide
HP Integrity Superdome 2 16-socket Manual
View all HP Integrity Superdome 2 16-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Integrity Superdome 2 16-socket manual content summary:
- HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 1
HP Smart Update Manager User Guide Abstract This guide is intended for individuals familiar with the configuration and operation of Microsoft Windows, Windows Server, Linux, smart components, and deployment of firmware and software. Because of the risk of data loss, only individuals experienced with - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 2
HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP ®, Windows®, Windows Vista®, and Windows Server® are U.S. registered trademarks of Microsoft Corporation. - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 3
for ProLiant servers using the Service Pack for ProLiant 9 HP SUM supported firmware for ProLiant servers 10 Deploying firmware for ProLiant servers using the HP Smart Update Firmware DVD 10 Deploying Integrity firmware bundles with HP SUM 11 HP SUM supported firmware for Integrity servers 11 - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 4
Firmware DVD and SPP mounted using iLO virtual media 63 Troubleshooting HP SUM in IPv6 networks 63 Troubleshooting HP SUM in IPv6 Windows Server 2003 environment 63 Troubleshooting HP SUM in IPv6 Windows Server 2008 environment 64 Troubleshooting HP SUM in IPv6 Red Hat and Novell SUSE-based - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 5
of ProLiant G6 Server ROM from 2010.03.30 or later to 2010.03.01 or earlier using HP SUM is not supported...68 ProLiant G2, G5, and G6 Servers - After Upgrading 68 6 Support and other resources 69 Information to collect before contacting HP 69 How to contact HP...69 Subscription service...69 - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 6
3Gb/6Gb SAS BL Switch interconnects on ProLiant servers • Support for deploying firmware updates to supported Integrity servers and Superdome 2 enclosures • Support for updating VC modules on Integrity servers NOTE: HP SUM does not support third-party controllers. This includes flashing hard drives - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 7
HP ProLiant Firmware Management Best Practices Planning Guide, or HP BladeSystem ProLiant Firmware Management Best Practices Implementer Guide, available on the HP SUM documentation website at http:// www.hp.com/go/hpsum/documentation. NOTE: HP HP SUM supports local and remote deployments. HP SUM - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 8
IP address or DNS name. ◦ HP Integrity Support bundles ◦ HP Integrity BL8x0c firmware NOTE: HP SUM can i2, rx2800 i2 and • Need to select individual firmware to update detect updates that are available for a VMware server and generate Superdome 2 Servers Bundles for Windows and Linux • Need - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 9
• Need to update all enclosure firmware • Need to target VMware host servers Target2 -username User1 -password PW1 ◦ HP Integrity BL8x0c i2, rx2800 i2, and Superdome 2 Servers Bundles for Windows and Linux ◦ HP Service Pack for ProLiant • Offline: SmartStart Scripting Toolkit (G7 and older - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 10
or online (a scripted or interactive mode) modes. The HP Smart Update Firmware DVD provides firmware for supported ProLiant servers and options. The Firmware DVD contains all the firmware for the supported ProLiant servers including BladeSystem enclosures and Virtual Connect firmware. • In offline - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 11
firmware on ProLiant servers, see the HP Service Pack for ProLiant User Guide on the HP SPP website at http://www.hp.com/go/spp. Deploying Integrity firmware bundles with HP SUM You can use HP SUM to deploy components delivered with the Integrity Server Bundles, or use HP SUM to pull updates - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 12
software on a local host or one or more remote hosts. If the host running HP SUM is using a Windows operating system, you can update Windows, Linux, or VMware target. HP Integrity servers can be running HP-UX or other operating systems, but the updates are driven by a Windows or Linux workstation - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 13
. If HP SUM detects a TPM, a warning message appears. To enable firmware updates without the need to type in the TPM password on each server, the setting the /tpmbypass parameter for HP SUM or the firmware update is blocked. To temporarily disable BitLocker support to allow firmware updates: 1. - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 14
detected and enabled, the installation is silent, the /tpmbypass switch is not given, and any firmware updated must be applied to the server. No warning appears. A new log file is generated (%systemdrive%\cpqsystem\log\cpqstub.log). Because the installation is silent, the installation is terminated - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 15
2 Using the HP SUM GUI Keyboard support The HP SUM GUI has accelerator keys that enable you to manage and control common tasks quickly. To ensure proper navigation, the following are a few reminders. • Press - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 16
from ftp.hp.com to a target until the Install button is clicked unless the component is needed to discover supported devices. If for editing or removal. Setting Proxy Server options Proxy server information may be needed to allow HP SUM to access ftp.hp.com to determine if updates are available - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 17
: ◦ Click Detect Proxy to automatically add the default location of the configuration script. ◦ Manually enter the address. 4. Enter the User ID and Password (if necessary). 5. Click OK. Using multiple repositories HP SUM allows you to select one or more repositories when selecting components to be - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 18
Repository, and then choose Firmware Only, Software Only, or Both. You can choose the updates to use when you add or edit a repository. By default, HP SUM displays firmware and software updates. If you want to view which updates are being used in an existing repository, select the repository in the - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 19
the instructions supported by both ProLiant and Integrity servers. For more information, see the HP BladeSystem Release Sets for Mixed ProLiant and Integrity website at http://h18004.www1.hp.com/products/servers/firmware/ mixed-release-sets.html. • Download the latest HP SPP version and HP Integrity - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 20
the credentials for each target you are updating. For more information, see "Entering target credentials" (page 22). NOTE: The target status Ready means that HP SUM can detect the target, and is able to take inventory of the target. No analysis occurs until you click Next. • Last Updated-This field - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 21
process, review the logs and correct the failures. After resolving the dependencies, restart the HP SUM application. NOTE: For Superdome 2 servers that do not support online firmware updates, power down all Superdome 2 partitions in the complex. If you do not power down all the partitions, a Failed - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 22
can search for IP address 192.168.1.1 through 192.168.1.255, but HP SUM does not support searching ports 192.168.1.1 through 192.168.3.255. • Port Address- messages as HP SUM verifies the credentials you entered. NOTE: HP Integrity servers only: If an iLO is part of a domain, HP recommends managing - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 23
updates for iLO (HP Integrity servers only) If you update a previously updated Integrity server via iLO but did not power down and reboot to activate the system firmware change, HP SUM asks you what to do with the pending update. You can choose to: • Leave the system for manual reboot to activate - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 24
Reviewing and installing updates This screen appears after HP SUM completes the dependency checks for each target. in this field. To select updates, resolve failed dependencies, or view device selection problems, click Select Bundles or Select Components. Both links display a list of all available - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 25
HP SUM adds an expansion box next to the most recent version of the component target was updated by HP SUM from the current host running HP SUM. • Associated Target-This field displays the IP address of the target, if the target is listed on another server's OA host servers list. • Description-This - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 26
. 3. HP Integrity servers only: Click Configure Now and then select Upload and Activate to activate the update. To wait until the next scheduled maintenance to activate the update, select Upload and Do not Activate. This function is supported by HP Integrity servers only. 26 Using the HP SUM GUI - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 27
screen, select the devices on the target that you want to update. You can also review any dependency problems that need to be resolved before HP SUM begins the update installation. NOTE: HP Integrity servers only: Some targets that are part of a domain allow you to update the entire domain at the - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 28
version • Power Monitor firmware version • System firmware version • FPGA firmware version Viewing firmware mismatch details (HP Integrity servers only) If you have a multi-blade server, you might encounter a situation where you have blades or partitions that are running different firmware versions - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 29
HP SUM does not support global reboot options for Superdome 2 servers. To set the reboot options: 1. Click Reboot Options. 2. Check Reboot System After Installation to set the reboot. 3. Check If Needed or Always. 4. Click OK. NOTE: Reboot Delay and Reboot Message do not apply for Integrity servers - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 30
View generated report box by default. If you do not want to view the report immediately, clear this box. 6. Click Generate. NOTE: HP SUM requires AMS to detect server IP addresses. Viewing a report 1. Click View Report. 2. Click the Browse button and then select the report you want to view, and then - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 31
component1_to_install> ...][ ...] The following commands are supported only by Superdome 2 servers: [/update_type] [/device_list ] [/reboot_list ] HP SUM with OA requires a user ID and password - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 32
SNMP AMS, SNMP, and WBEM The following table shows what updates occur if AMS switches are currently installed. Command no switches /use_ams G7 and earlier servers N/A N/A Gen8 servers AMS AMS 32 Using scripts to deploy updates - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 33
SNMP AMS and WBEM AMS and SNMP AMS and WBEM AMS, SNMP, and WBEM AMS, SNMP, and WBEM NOTE: G7 and earlier servers do not support AMS. Command-line arguments HP SUM recognizes the following command-line arguments, which you can use to pre-populate the GUI on the Source Selection and Review - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 34
on the command line. If there are no bundles specified on the command line, and multiple bundles are in the directory, the /use_latest argument allows HP SUM to use the bundle that has the latest version for installation. Specifies a directory or file share that contains the PSP, ISP, and components - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 35
is used, and the /use_snmp & /use_ams arguments are not, the SNMP and AMS components are optional. This argument does not apply to HP Integrity servers. Specifies which AMS components can be installed along with SNMP components. The AMS and SNMP components are available to select by default. When - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 36
the installation to proceed on a Superdome 2 target even when warnings are returned HP SUM the information on how to proceed when a component has a failed dependency. The supported conditions are met, this argument causes the server (or host server in a remote installation) to reboot: • - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 37
HP SUM /dryrun Targets /user or /username /psswd /target "netAddress" /current_credential /oa_username Description use this argument with the /reboot option, or the argument is ignored. Delays the reboot of the server which can be a remote server, remote iLO NIC port, - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 38
not required if VC has the same credentials as the associated OA. You do not need to provide an OA network address associated with VC. HP SUM queries it from a specified VC target. To update multiple VCs with different user names and passwords, or VCs with OAs that have different credentials - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 39
(page 43). Enables you to instruct HP SUM to delete the input file after it has been read. Superdome 2 server commands /update_type /device_list Server 2008 with the Server Core option, you must access the system as a remote host by using HP SUM running on a system with a supported Windows - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 40
iLO • Software-later version of: ◦ HP Insight Diagnostics Online Edition for Windows Server 2003 (cp008097.exe) ◦ HP System Management Homepage (HP SMH) for Windows (cp008257.exe) • HP SUM ◦ Defined groups: Management Servers-three servers (Management Server1, Management Server2, Management Server3 - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 41
from the update bundle, cp008097.exe, and cp008257.exe were installed on Management Server1, Management Server2, and Management Server3. Return codes HP SUM has consolidated return codes from Linux and Windows smart components into a new, enhanced return-code mapping. These return codes determine - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 42
Linux smart-component return codes Single-target servers: Error level 0 1 2 3 Multi-target servers: Error level 0 1 2 3 4 5 6 7 Linux RPM The version to be installed is older than the version already installed. • The supported hardware is not present, not enabled, or in a state that an installation - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 43
script the update of multiple, individual targets or groups of targets (HP ProLiant and Integrity servers and options) within a single operation through the input file functionality. To protect your credentials, use a secure server or a management console. To create an input file, use a text editor - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 44
To allow for the inclusion of double-byte characters, the input file is in UTF-8 format. Error reporting If errors occur in the input file, HP SUM exits with a return value of -2 (bad parameter). The details of the location and nature of the error are recorded in hpsum_execution_log__ - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 45
existing HP SUM session in progress. Use this parameter to skip the host if an existing HP SUM multiple bundles are in the directory, this parameter enables HP SUM to use the bundle that has the latest version . YES, NO Nothing is installed. Specify the HP SUM CLI options inside the One or more CLI - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 46
are optional. This parameter does not apply to HP Integrity servers. ROMONLY This is a filter switch that allows HP Web URL (for example, autoproxy.com) FTP site (ftp://ftp.hp.com). Instructs HP SUM to delete the input file YES, NO (default) after it has been read. This parameter instructs HP - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 47
IP address or the IP address, DNS name DNS name of a remote server, remote iLO NIC port, Virtual Connect Ethernet or Fibre Channel Module for c- IPv4 or IPv6 format. This parameter specifies an already defined group name in the HP SUM GUI. UID Logs in to the target hosts with your user - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 48
IP address or DNS host name IP address, DNS name of a server as a destination for SNMP traps, such as Systems Insight Manager. NO (do not start the storage agent) Linux PSP only.) CMASTARTNICAGENT Determines whether the HP Systems Insight • YES (start the web agent) Manager NIC agent is started. - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 49
Homepage (hpsmh) uses this parameter to set up security for the web server. (Applies to Linux PSP only.) Up to five Linux groups, separated by spaces or semicolons, to enable administrative access to the web services. HP Systems Management Homepage uses Up to five Linux groups, separated by this - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 50
the CERTLIST parameter relationship mode. (Applies to Linux PSP to enable access to the server. only.) • TrustByName-If you use this value, you must define the XENAMELIST. • TrustByAll-HP does not recommend using this value because of possible negative security consequences. CAUTION: The - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 51
example: REBOOTLIST = npar1, npar2 Superdome 2 servers only Examples of the HP SUM input file include the following: REBOOTALLOWED = YES REBOOTREQUIRED = NO REBOOTMESSAGE = "Server is going down for a reboot have to be OAs. They can be any target that HP SUM supports. DRYRUN = YES Input files 51 - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 52
, FailedDepedencies SKIPTARGET = NO SOURCEPATH = C:\fwcd\firmware-8.70-0\hp\swpackages [GROUPS] HOST=winserver UID=Userid PWD=password [END = C:\ fwcd\firmware-8.70-0\hp\swpackages FORCEALL = YES REBOOTALLOWED = YES REBOOTDELAY = 30 REBOOTMESSAGE = "Install complete, server will reboot in 30 seconds - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 53
END] [TARGETS] HOST=16.83.61.24 UID=Userid PWD=password [END] Example: Superdome 2 input files: IGNOREWARNINGS = TRUE [TARGET] HOST = 10.0.0.206 UID = Userid specified on the command line, HP SUM uses the local host and default repository locations (the directory where HP SUM was initiated). You can - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 54
, and driver versions installed on targets. HPSUM_Installed_Report_.xml or .html HP SUM generates the reports as an XML or HTML files that you can view in a JavaScript-enabled web browser. The supported browsers for viewing the report files are Microsoft Internet Explorer 6.0 and Mozilla - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 55
is completed or canceled, HP SUM stops the remote service, removes it from the target server, closes the port in the iptables firewall, and then closes the SSH connection to the target server. NOTE: Windows XP clients are not supported in IPv6 networks for HP SUM deployment. Configuring IPv6 - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 56
. HP SUM supports both the short-name and full IPv6 notation. You do not need to add the optional interface number when you enter the address. If you cannot connect to the target server or receive a Discovery failed message when executing HP SUM in an IPv6 environment, see "Troubleshooting" (page - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 57
Table 2 HP SUM Windows network ports Ports Port 443 Ports 445 and 137/138/139 (Port 137 is used only if you are using NetBIOS naming service.) Port 62286 Ports 80 or 63000-63006 Description A secure data port used to transfer information. Connects to the remote ADMIN$ share on target servers. These - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 58
a connection to the remote Linux server via SSH. For Integrity servers, HP SUM uses this port to discover server that uses port 80 if it is available or port 63006, if it is not. This support allows iLO and VC firmware updates without having to access the host server. It also allows servers - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 59
downgrade or upgrade. Includes trace data of repository manager and general errors if any. Contains trace data for HP SUM SOAP server sessions. Contains information of the HP SUM SOAP server. Contains the data and time for each session has started. This file is saved in separate directory named - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 60
Error or Discovery Failed messages, follow these troubleshooting tips: • Ensure your workstation does not have an existing connection to the ADMIN$ share on the target IP address. If it does, it prevents HP SUM from connecting to the remote server's share because Windows only allows one connection - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 61
sure you have installed the CIM providers from HP. You may download this within the "Offline Bundle Utilities" on ESXi 5 server downloads from the HP support website at http://www.hp.com/support, or they come already bundled in the HP custom ESXi image HP SUM hangs during boot If the system hangs - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 62
. When the message is entered using CLI, the reboot message looks corrupted because the Japanese character set is not supported in CLI. Running in a directory path containing multi-byte characters HP SUM hangs when it is run in a directory path that contains multi-bye characters. 62 Troubleshooting - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 63
failures can be caused by the incorrect configuration of the IPv6 network. Troubleshooting HP SUM in IPv6 Windows Server 2003 environment To validate that the IPv6 network is configured correctly for HP SUM support, you must verify the following based on your operating system version. • Validate - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 64
You can always copy HP SUM to the target servers and execute using the local installation method. Troubleshooting HP SUM in IPv6 Windows Server 2008 environment To validate that the IPv6 network is configured correctly for HP SUM support, you must verify the following based on your operating system - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 65
other with x86_64 architecture. • The kernel version running on the two systems does not match. Resolution options: 1. Run HP SUM on the target server itself instead of remotely deploying HP SUM. 2. Build the driver RPM locally and take the resulting RPM file from the standard location (for example - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 66
the entry similar to the following: Blocked Incoming TCP from the HOST (15.255.101.110) during execution of HP SUM. 5. From the menu, select Task→Unlock Interface. 6. Enter the password of the McAfee user interface. the following settings for the new firewall rules on your system. 66 Troubleshooting - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 67
. Click OK to ensure new firewall rules have been implemented. 11. Restart HP SUM. Performing these steps allows HP SUM to function, although after a period of time (ranging from minutes to hours), McAfee disables HP SUM access. HP SUM prevents an upgrade of Virtual Connect firmware if the VC health - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 68
Downgrade of ProLiant G6 Server ROM from 2010.03.30 or later to 2010.03.01 or earlier using HP SUM is not supported When HP SUM is launched, all ROM, see the HP Support website at http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp? locale=en_US&objectID=c02838375. 68 Troubleshooting - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 69
methods to contact HP technical support: • See the Contact HP worldwide website: http://www.hp.com/go/assistance • Use the Contact HP link on the HP Support Center website: http://www.hp.com/go/hpsc • In the United States, call +1 800 334 5144 to contact HP by telephone. This service is available 24 - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 70
property of HP. Related information Documents • HP Service Pack for ProLiant Release Notes • HP Service Pack for ProLiant Server Support Guide • HP Smart Update Manager User Guide • HP ProLiant and Integrity Firmware Management Best Practices Overview • HP ProLiant and Integrity Firmware Management - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 71
devices and is optimized for environments with 1-50 servers. Ideal for customers who can benefit from proactive notification but do not need proactive service delivery and integration with a management platform. • HP Insight Remote Support Advanced: For customers with mid-size to large environments - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 72
monitoring and proactive service support for nearly all HP servers, storage, network, and SAN environments, plus selected non-HP servers that have a support obligation with HP. It is integrated with HP Systems Insight Manager. A dedicated server is recommended to host both HP Systems Insight Manager - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 73
7 Documentation feedback HP is committed to providing documentation that meets your needs. To help us improve the documentation, send any errors, suggestions, or comments to Documentation Feedback ([email protected]). Include the document title and part number, version number, or the URL when - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 74
SSH SSL TPM UNC VC WBEM WMI Agentless Management Service complex programmable logic device domain name system Field Programmable Gate Array HP Smart Update Manager Integrated Lights-Out intelligent power distribution unit Integrity Support Pack Monarch (primary) Onboard Administrator Power-On Self - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 75
issues, troubleshooting, 61 Discovery Process screen, 19 document conventions, 71 related documentation, 70 documentation HP website, firewalls, 66 firmware details, 27 HP SUM supported firmware for HP Integrity servers, 11 HP SUM supported firmware for HP ProLiant servers, 10 firmware details view, - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 76
in IPv6 Red Hat and Novell SUSE-based Linux environments, 64 Troubleshooting HP SUM in IPv6 Windows Server 2003 environment, 63 Troubleshooting HP SUM in IPv6 Windows Server 2008 environment, 64 K keyboard support, 15 L Linux component version discrepancy, 65 Linux IPv6 environment, 56 Linux remote - HP Integrity Superdome 2 16-socket | HP Smart Update Manager 5.1 User Guide - Page 77
troubleshooting, repository, 65 Trusted Platform Module, 12 Trusted Platform Module (TPM) Trusted Platform Module, 14 typographic conventions, 71 V version discrepancy issue, 65 virtual media access, 63 W websites product manuals, 70 Windows smart components, return codes, 41 77
HP Smart Update Manager User Guide
Abstract
This guide is intended for individuals familiar with the configuration and operation of Microsoft Windows, Windows Server,
Linux, smart components, and deployment of firmware and software. Because of the risk of data loss, only individuals experienced
with using firmware and software should implement the procedures.
HP Part Number: 613175-006a
Published: January 2013
Edition: 6a