HP Integrity rx1620 Ethernet Card (PCIe) Installation Guide for HP Integrity S
HP Integrity rx1620 Manual
View all HP Integrity rx1620 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Integrity rx1620 manual content summary:
- HP Integrity rx1620 | Ethernet Card (PCIe) Installation Guide for HP Integrity S - Page 1
PCIe Ethernet Card Installation Guide for HP Integrity Servers HP-UX, Linux, OpenVMS, and Windows HP Part Number: 5991-6020 Published: April 2008 Edition: 1 - HP Integrity rx1620 | Ethernet Card (PCIe) Installation Guide for HP Integrity S - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP Integrity rx1620 | Ethernet Card (PCIe) Installation Guide for HP Integrity S - Page 3
• Support Guides and Users Guides, including detailed maintenance and troubleshooting information Prerequisites Review the prerequisites below before performing any installation. • Review the card, technology, and driver documentation. See "Operating Systems Supported on HP Integrity systems - HP Integrity rx1620 | Ethernet Card (PCIe) Installation Guide for HP Integrity S - Page 4
documentation for your server in the Enterprise Servers, Workstations and Systems Hardware section at: http://www.docs.hp.com/en/hw. devices that are attached to the server. Configuring a Card Using HP-UX on HP Integrity Systems To configure the card on a server running HP-UX 11i v1, 11i v2, or - HP Integrity rx1620 | Ethernet Card (PCIe) Installation Guide for HP Integrity S - Page 5
HP-UX 11i v3, use the System Management Homepage (SMH). For further details, see the HP-UX System Administrator's Guide: Configuration Management. On HP Configuring a Card Using OpenVMS on HP Integrity Systems Follow these steps to configure the card on a server running OpenVMS: 1. Install LAN card - HP Integrity rx1620 | Ethernet Card (PCIe) Installation Guide for HP Integrity S - Page 6
HP Integrity servers automatically detect and configure PCIe-compliant adapters when restarting. The adapter Interrupt Request Line (IRQ) level is automatically set by the Extensible Firmware Interface (EFI) each time the server restarts. If you encounter configuration problems, see the HP Support - HP Integrity rx1620 | Ethernet Card (PCIe) Installation Guide for HP Integrity S - Page 7
your input for the ping command. Configuring a Card Using Linux on HP Integrity Systems The method for installing Linux drivers for the Ethernet card varies depending on the Linux distribution you use. For additional instructions, it is recommended that you see the documentation for each respective - HP Integrity rx1620 | Ethernet Card (PCIe) Installation Guide for HP Integrity S - Page 8
RHEL5) automatically detects and configures new hardware and selects DHCP for TCP/IP configuration. To manually configure or makes changes to a Server Version 10 To configure the Ethernet card on a server running SUSE Linux Enterprise Server Version 10 (SLES10), follow these steps: 1. Boot the server - HP Integrity rx1620 | Ethernet Card (PCIe) Installation Guide for HP Integrity S - Page 9
9 - HP Integrity rx1620 | Ethernet Card (PCIe) Installation Guide for HP Integrity S - Page 10
*5991-6020* Printed in the US
PCIe Ethernet Card Installation Guide for HP
Integrity Servers
HP-UX, Linux, OpenVMS, and Windows
HP Part Number: 5991-6020
Published: April 2008
Edition: 1