HP Integrity rx8620 Read Me First: HP AB322A 4 GB DIMM Installation Guide
HP Integrity rx8620 Manual
View all HP Integrity rx8620 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Integrity rx8620 manual content summary:
- HP Integrity rx8620 | Read Me First: HP AB322A 4 GB DIMM Installation Guide - Page 1
4 GB DIMMs on hp 9000 rp7420 and hp 9000 rp8420 servers, the server must be updated to rp7420/rp8420 firmware version 2.0 or higher. To verify that version 2.0 is installed, run the MP sysrev command and verify firmware and programmable hardware versions using Table 1. For hp Integrity rx7620 and - HP Integrity rx8620 | Read Me First: HP AB322A 4 GB DIMM Installation Guide - Page 2
HP AB322A 4 GB DIMM Installation Guide Table 1 Firmware and Programmable Hardware Versions rp7420/rp8420 rx7620/rx8620 FIRMWARE Core IO Master Core IO Slave Cell PDHC Cell SFW A.005.022 A.005.022 A.003.014 21.3 A.005.021 A.005.021 A.003.014 1.015 PROGRAMMABLE HARDWARE System Backplane GPM - HP Integrity rx8620 | Read Me First: HP AB322A 4 GB DIMM Installation Guide - Page 3
HP AB322A 4 GB DIMM Installation Guide NOTE Failure to upgrade firmware might result in error messages displayed during the boot process. Installing the 4 GB DIMMs 1. Follow proper procedures to shut down the operating system. 2. Remove the right side cover. 3. Power off the cell board using the
HP AB322A 4 GB DIMM Installation Guide
Part No.: AB322-96001
1
HP AB322A 4 GB DIMM Installation Guide
IMPORTANT
Configuration restrictions apply.
4 GB DIMMs cannot be mixed with any other sized DIMMs on the same cell board.
However, 4 GB DIMMs can be mixed with other sized DIMMs within the same
nPartition as long as they are not mixed on the same cell board.
NOTE
hp Integrity rx7620/rx8620 servers running Microsoft Window Server 2003 currently
do not support 4 GB DIMMs.
Minimum Operating System Versions
rp7420/rp8420:
HP-UX 11.11 HWE 0406
rx7620/rx8620:
HP-UX 11.23 HWE 0403
Linux Rhel 3 update 2
Firmware Requirements
Before installing 4 GB DIMMs on hp 9000 rp7420 and hp 9000 rp8420 servers, the server must be updated to
rp7420/rp8420 firmware version 2.0 or higher. To verify that version 2.0 is installed, run the MP
sysrev
command and verify firmware and programmable hardware versions using Table 1.
For hp Integrity rx7620 and hp Integrity rx8620 servers, the server must be updated to rx7620/rx8620
firmware version 2.0 or higher. To verify that version 2.0 is installed, run the MP
sysrev
command and
verify the firmware and programmable hardware versions using Table 1.
READ ME FIRST