HP KE289A4 User Guide
HP KE289A4 Manual
 |
View all HP KE289A4 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP KE289A4 manual content summary:
- HP KE289A4 | User Guide - Page 1
HP LP2275w and LP2475w LCD Monitors User Guide - HP KE289A4 | User Guide - Page 2
with the furnishing, performance, or use of this material. The information in this document is provided "as is" without warranty of any kind, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, and is subject to change without notice. The - HP KE289A4 | User Guide - Page 3
About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life - HP KE289A4 | User Guide - Page 4
iv About This Guide - HP KE289A4 | User Guide - Page 5
Guidelines Important Safety Information ...4 Maintenance Guidelines ...5 Cleaning the Monitor ...5 Shipping the Monitor ...5 3 Setting Up the Monitor Installing the Monitor Pedestal Base ...6 Rear Components ...7 HP LP2275w Model ...7 HP LP2475w Model ...8 Selecting and Connecting the Signal Cables - HP KE289A4 | User Guide - Page 6
A Troubleshooting Solving Common Problems ...35 Using the Worldwide Web ...37 Preparing to Call Technical Support 37 Appendix B Technical Specifications HP LP2275w Model ...38 HP LP2475w Union ...47 Restriction of Hazardous Substances (RoHS 48 Appendix D LCD Monitor Quality and Pixel Policy vi - HP KE289A4 | User Guide - Page 7
1 Product Features HP LP2275w Model The LCD (liquid crystal display) monitor has an active matrix, thin-film transistor (TFT). The monitor features include: ● Large 55.88 cm (22-inch) diagonal viewable area display with 1680 × 1050 resolution, plus full- screen support for lower resolutions ● Wide - HP KE289A4 | User Guide - Page 8
MPR II 1990 HP LP2475w Model The LCD (liquid crystal display) monitor has an active matrix, thin-film transistor (TFT). The monitor features include: ● Accessory rail on monitor to accept optional mounted devices, such as an HP speaker bar ● Plug and play capability if supported by the system ● - HP KE289A4 | User Guide - Page 9
● Software and documentation CD that includes HP Display Assistant, Pivot Pro software, monitor driver software, and product documentation ● Energy saver feature to meet requirements for reduced power consumption ● AssetControl ● Compliant with the following regulated specifications: ◦ European - HP KE289A4 | User Guide - Page 10
reduce the risk of serious injury, read the Safety and Comfort Guide. It describes proper workstation, setup, posture, and health and work and correctly sized furniture designed to properly support your HP LCD monitor. WARNING! LCD monitors that are inappropriately situated on dressers, bookcases - HP KE289A4 | User Guide - Page 11
this product yourself. Adjust only those controls that are covered in the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider. ● Use only a power source and connection appropriate for this - HP KE289A4 | User Guide - Page 12
and other attached devices, then follow the instructions below. NOTE: Be sure the master power switch, located on the rear panel of the monitor, is in the off position. The master power switch turns off all power to the monitor. Installing the Monitor Pedestal Base NOTE: Do not install the pedestal - HP KE289A4 | User Guide - Page 13
rear components vary by model. HP LP2275w Model Figure 3-2 Rear Components Table 3-1 HP LP2275w Rear Components Component Function 1 Cable Lock Provision Provides slot for use with cable security locks. 2 Master Power Switch Turns off all power to the monitor. 3 AC Power Connector Connects - HP KE289A4 | User Guide - Page 14
Rear Components Table 3-2 HP LP2475w Rear Components Component Function 1 Cable Lock Provision Provides slot for use with cable security locks. 2 Master Power Switch Turns off all power to the monitor. 3 AC Power Connector Connects the AC power cord to the monitor. 4 DisplayPort Connector - HP KE289A4 | User Guide - Page 15
Model) on the front panel. Table 3-3 Signal Connectors and Cables Input Monitor Connector and Cable Connection Description Plug DVI-I (HP LP2275w) (HP LP2475w) DisplayPort (HP LP2275w) (HP LP2475w) The video mode supported by the DVI-I connector is determined by the video cable used. ● For - HP KE289A4 | User Guide - Page 16
the Component connectors on the input device for analog operation. Cable purchased separately. S-Video (HP LP2475w) Composite (HP LP2475w) Connect an S-Video cable to the S-Video connector on the monitor and the S-Video connector on the input device for analog operation. Cable purchased separately - HP KE289A4 | User Guide - Page 17
a convenient, well-ventilated location near the computer. 2. Connect one end of the power cable to the AC power connector on the back of the monitor (1), and the other end to an electrical wall outlet (2). Figure 3-4 Connecting the Power Cable WARNING! To reduce the risk of electric shock or damage - HP KE289A4 | User Guide - Page 18
Connecting USB Devices The monitor provides USB connectors on the side panel and on the rear panel that can be used to panel of the computer, and the other end to the upstream USB connector on the monitor. 2. Connect the USB devices to the USB downstream connectors on the rear or side panel of the - HP KE289A4 | User Guide - Page 19
Place the cables through the cable management channel on the back of the monitor base. Figure 3-6 Using the Cable Management Feature Adjusting the Monitor 1. Tilt the monitor's panel forward or backward to set it to a comfortable eye level. Figure 3-7 Tilting the Monitor Cable Management 13 - HP KE289A4 | User Guide - Page 20
lowest height position: a. Make sure that the monitor is safely positioned on a stable surface. b. Gently push down on the display head (1). c. While pushing down the display head, press the lock-down/release button on the front of the column (2). d. Guide the display head up to the desired height - HP KE289A4 | User Guide - Page 21
screen, you should always activate a screen saver application or turn off the monitor when it is not in use for a prolonged period of time. Image retention is a condition that may occur on all LCD screens. * A prolonged period of time is 12 consecutive hours of non-use. NOTE: If pressing the power - HP KE289A4 | User Guide - Page 22
optional devices, such as the HP speaker bar, to the LCD monitor. Refer to the documentation included with the optional device for detailed mounting instructions. Figure 3-11 Using the Accessory Rails Feature Removing the Monitor Pedestal Base You can remove the monitor panel from the pedestal base - HP KE289A4 | User Guide - Page 23
It allows you to quickly and securely attach the monitor panel to the mounting fixture. 1. Remove the monitor panel from the pedestal base. Refer to Removing the Monitor Pedestal Base on page 16 in the previous section. CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes - HP KE289A4 | User Guide - Page 24
: The Quick Release can also be installed directly to a wall to mount the monitor panel. It is designed to support a maximum of up to 10.9 kg (24 lbs). If you are mounting to a wall, HP recommends that you consult with a qualified engineering, architectural, or construction professional to determine - HP KE289A4 | User Guide - Page 25
the Rating Labels The rating labels on the monitor provide the spare part number, product number, and serial number. You may need these numbers when contacting HP about the monitor model. The rating labels are located on the rear panel of the monitor display head. Figure 3-16 Locating the Rating - HP KE289A4 | User Guide - Page 26
model PDF Complete is supplied on this CD and can be installed from the menu. NOTE: If the monitor does not include a CD, the .INF and .ICM files can be downloaded from the HP monitors support Web site. See Downloading from the Worldwide Web on page 21 in this chapter. The Information File The - HP KE289A4 | User Guide - Page 27
from the HP monitors support Web site: 1. Refer to http://www.hp.com/support and select the country region. 2. Follow the links for the monitor to the support page and download page. 3. Ensure the system meets the requirements. 4. Download the software by following the instructions. Installing the - HP KE289A4 | User Guide - Page 28
disc drive. The CD menu is displayed. 4. Select Open Auto-Adjustment Software. The setup test pattern is displayed. 5. Press the -/Auto button on the monitor front panel to produce a stable, centered image. 6. Press the ESC key or any other key on the keyboard to exit the test pattern. 22 Chapter - HP KE289A4 | User Guide - Page 29
Panel Controls Front panel controls vary by model. HP LP2275w Model Table 4-1 HP LP2275w Monitor Front Panel Controls Control Function 1 Menu 2 adjustment levels. ● When the OSD menu is inactive, resets the monitor settings to factory default settings. 4 Input Selects the video input (DVI - HP KE289A4 | User Guide - Page 30
LP2475w Model Table 4-2 HP LP2475w Monitor Front Panel Controls Control Function 1 Input / Scan Scans all OSD menu and increases adjustment levels. ● When the OSD menu is inactive, resets the monitor settings to factory default settings. 6 PIP/POP Turns Picture-In-Picture or Picture-Outside- - HP KE289A4 | User Guide - Page 31
On-Screen Display (OSD) menu or from the HP Display Assistant utility. Using the On-Screen Display Menu Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. To access the OSD, do the following: 1. If the monitor is not already on, press the Power button - HP KE289A4 | User Guide - Page 32
sized to fit the screen and maintains proportional image ● One-to-one-disables video scaling, displays an image that is smaller in size than the monitor's capability and centers the image on the screen in the active viewing area Minimizes any vertical bars or strips visible on the screen background - HP KE289A4 | User Guide - Page 33
Menu Submenu Management Power Saver Power On Recall Mode Display Power-On Status Display DDC/CI Support Bezel Power LED Sleep Timer Description Selects the power management features of the monitor. Enables the power saving feature. Select: ● On ● Off The factory default is On. Restores power - HP KE289A4 | User Guide - Page 34
orientation. Video Input Control (LP2275w Model) Switch Video Input Controls the video input signal for the monitor. Selects the video input signal Scan button automatically scans through all video inputs for valid signals ● Manual Input Scan-pressing the Scan button scans the video inputs one at - HP KE289A4 | User Guide - Page 35
the recommended resolution mode and refresh rate for the monitor. Serial Number Reports the serial number of the monitor. The serial number is needed if contacting HP technical support. Version Reports the firmware version of the monitor. Backlight Hours Reports the total hours of backlight - HP KE289A4 | User Guide - Page 36
on-screen display. Using the HP Display Assistant Utility HP Display Assistant, included on the software and documentation CD, is a software utility that guides you through the tuning process with easy to understand instructions and background patterns designed for each monitor control. It provides - HP KE289A4 | User Guide - Page 37
Signal Out of Range-Change resolution setting to 1680 × 1050 - 60Hz-Indicates the monitor does not support the input signal because the resolution and/or refresh rate are set higher than the monitor supports (LP2275w Model). ● Input Signal Out of Range-Change resolution setting to 1920 × 1200 - 60Hz - HP KE289A4 | User Guide - Page 38
LiteSaver HP Display LiteSaver is a software application, available on the CD, that increases monitor life and saves energy. It allows you to place the monitor into its low power sleep mode at predefined times by shutting down or reducing power to most internal circuits. This helps protect the LCD - HP KE289A4 | User Guide - Page 39
Display LiteSaver. It will no longer control the monitor power until it is next run. View HP Display LiteSaver Readme on the CD for additional information on how to configure HP Display LiteSaver. sRGB Support The monitor is designed to support sRGB for color management, which adapts to the color - HP KE289A4 | User Guide - Page 40
you from completing this procedure. The sRGB ICM file does not support Windows 95 and Windows NT operating systems. 1. Click the Display Add button 5. To activate a color profile for the monitor, you must set it as the Default Monitor Profile. Select sRGB Color Space Profile, then click Set as - HP KE289A4 | User Guide - Page 41
setting to 1680 × 1050 @ 60Hz (HP LP2275w Model) or Input Signal Out of Range. Change resolution setting to 1920 × 1200 @ 60Hz (HP LP2475w Model) is displayed on screen. Video resolution and/or refresh rate are set higher than what the monitor supports. Restart the computer and enter Safe Mode - HP KE289A4 | User Guide - Page 42
Problem Possible Cause Solution monitor enters into low-power mode. For example, if the Display Off time is set to 5 minutes from the current time and the Activity Extension is set to 10 minutes, the HP monitor to enter into low-power modes. OSD Lockout is displayed. The monitor The monitor's - HP KE289A4 | User Guide - Page 43
, online assistance, community forums of IT experts, broad mutlivendor knowledge base, monitoring and diagnostic tools, go to http://www.hp.com/support Preparing to Call Technical Support If you cannot solve a problem using the trouble shooting tips in this section, you may need to call technical - HP KE289A4 | User Guide - Page 44
vary either higher or lower. HP LP2275w Model Table B-1 HP LP2275w Specifications Display Type Viewable Image Size Refresh Rate Environmental Requirements Temperature Operating Temperature Storage Temperature 55.9 cm wide screen TFT LCD 55.9 cm diagonal -5 to 30° -45 to 45° 100 mm range Clockwise - HP KE289A4 | User Guide - Page 45
Table B-1 HP LP2275w Specifications (continued) Relative Humidity Power Source Altitude: Operating Storage Power Refresh Rate Environmental Requirements Temperature Operating Temperature Storage Temperature 60.96 cm wide screen TFT LCD 60.96 cm diagonal -5 to 30° -45 to 45° 110 mm range Clockwise - HP KE289A4 | User Guide - Page 46
Table B-2 HP LP2475w Specifications (continued) Relative Humidity Power Source Altitude: Operating Storage Power Consumption (maximum) Input Terminal 20 to 80% 90 - 265 VAC, 45/63 Hz 0 to - HP KE289A4 | User Guide - Page 47
the most commonly used modes and are set as factory defaults. This monitor automatically recognizes these preset modes and they will appear properly sized and centered on the screen. HP LP2275w Model Table B-3 HP LP2275w Factory Preset Modes Preset Pixel Format Horz Freq (kHz) 1 640 × 480 31 - HP KE289A4 | User Guide - Page 48
Table B-4 HP LP2475w Factory Preset Modes (continued) Preset Pixel Format Horz Freq (kHz) 9 1024 are not using a preset mode. It this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen display. Your changes can be made to any or all of these modes and - HP KE289A4 | User Guide - Page 49
will utilize less than 2 watts of power. There is a brief warm up period before the monitor will return to its normal operating mode. Refer to the computer manual for instructions on setting energy saver features (sometimes called power management features). NOTE: The above power saver feature - HP KE289A4 | User Guide - Page 50
. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - HP KE289A4 | User Guide - Page 51
Hewlett Packard Company P. O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call 1-800-HP-INVENT (1-800 474-6836) For questions regarding this FCC declaration, contact: Hewlett Packard Company P. O. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Or, call ( - HP KE289A4 | User Guide - Page 52
HP brand computers, keyboards and monitors that bear the "GS" approval mark, meet the applicable ergonomic requirements. The installation guides you have questions about the type of power cord to use, contact an authorized HP service provider. A power cord should be routed so that it is not likely to - HP KE289A4 | User Guide - Page 53
other products. Product Environmental Notices Energy Star Compliance Monitors that are marked with the ENERGY STAR Logo manual. Materials Disposal This HP product contains mercury in the fluorescent lamp in the display LCD that service or the shop where you purchased the product. - HP KE289A4 | User Guide - Page 54
for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, visit http://www.hp.com/go/jisc0950. 11363-2006 11363-2006 48 Appendix C Agency Regulatory Notices - HP KE289A4 | User Guide - Page 55
D LCD Monitor Quality and Pixel Policy The TFT monitor uses high-precision technology, manufactured according to HP standards, to guarantee trouble-free performance. Nevertheless, the display may have cosmetic imperfections that appear as small bright or dark spots. This is common to all LCD
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
 |
 |
HP LP2275w and LP2475w LCD Monitors
User Guide