HP LE1901w HP LE1901w/LE1901wm and LE2201w LCD Monitors User Guide - Page 25

Table 4-2 OSD Menu (continued) Icon Main Menu Video Input Control (select models) Information Factory Reset Exit Submenu Description Selects the video input signal. DVI is the factory default. Switch Video Input Selects the other (VGA or DVI) video input signal. Default is DVI. Auto-Switch Input Turns the system's automatic video signal input to on or off. The factory default is On. Default Video Input Selects the default or primary video input signal when the monitor is connected to two active and valid video sources. The monitor will automatically determine the video format. The default input selection is DVI. Analog - VGA - Selects VGA input. Digital - DVI - Selects DVI input. Selects and displays important information about the monitor. Current Settings Provides the current input video mode. Recommended Settings Provides the recommended resolution mode and refresh rate for the monitor. Serial Number Reports the serial number of the monitor. The serial number is needed if contacting HP technical support. Version Reports the firmware version of the monitor. Backlight Hours Reports the total hours of backlight operation. Service Support: http:// www.hp.com/support Returns all OSD menu settings and DDC/CI controls to the factory default settings, except the Language. Exits the OSD menu screen. ENWW Adjusting the Monitor Settings 19