HP LaserJet 9040/9050 HP LaserJet 9040mfp/9050mfp - (multiple language) Gettin - Page 27
To load Tray 2 and Tray 3, Load Trays 1
View all HP LaserJet 9040/9050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
English 1 To load Tray 2 and Tray 3 1 Open the tray until it stops. 2 Adjust the left (Y) paper guide by pressing the tab on the guide and set the guide to the correct paper size. 3 Adjust the front (X) paper guide by pressing the tab on the guide and set the guide to the correct paper size. 4 Load a stack of media with the top of the stack toward the rear of 2 the tray. For singled-sided printing, the side to be printed on should be down. For double-sided printing, the side to be printed on should be up. Note For information about printing on special media, see the use guide. 5 Set the paper lever to Standard if both guides are set to the same 3 Standard marking, such as Letter or A4. Otherwise, set the lever to Custom. 6 Close the tray. 7 The paper size and type for this tray appears on the MFP control panel. Touch OK to verify or see the use guide to make changes. 8 Repeat steps 1 through 7 to load the other tray. 4 6 ENWW Load Trays 1, 2, 3, and 4 25