HP LaserJet 9040/9050 HP LaserJet 9040mfp/9050mfp - (multiple language) Gettin - Page 28
To load Tray 4, facing up.
View all HP LaserJet 9040/9050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
1 To load Tray 4 Tray 4 holds up to 2,000 sheets. For media specifications, see the use guide. 1 Pull Tray 4 open until it stops. 2 Adjust the left (Y) paper guide by pressing the tab on the guide and set the guide to the correct paper size. 3 Adjust the front (X) paper guide by pressing the tab on the guide 2 and set the guide to the correct paper size. 4 Load up to 2,000 sheets of A4- or Letter-size paper with the short edge of the paper leading into the product. Note For single-sided printing of letterhead or preprinted paper, the side to be printed on should be facing down. For double-sided printing of letterhead or preprinted paper, the first side to be printed on should be 3 facing up. For information about printing on special media, see the use guide. 5 Set the Custom/Standard switch to Standard if both guides are set to the same Standard marking, such as Letter or A4. Otherwise, set the switch to Custom. 6 Press down on each of the four corners of the paper stack to ensure the paper rests flat in the tray, without bending. 4 6 26 Product Setup ENWW