HP LaserJet 9040/9050 Service Manual - Page 119
Insert the three locating tabs on the underside of the cover
View all HP LaserJet 9040/9050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Left top cover 1 Remove the control panel. See page 111. 2 Remove the right top cover. See page 101. 3 Remove two silver screws (callout 1). 4 Lift the left top cover up, and then pull it toward the right side of the printer to release two locating tabs (on the underside of the cover, at the left edge). 21 2 Figure 39. Left top cover To reinstall z Be sure to feed the control-panel cable up and through the hole (callout 2) in the left top cover. z Insert the three locating tabs (on the underside of the cover, at the left edge) into the locating holes on the top of the printer. Covers 103
Covers
103
Left top cover
1
Remove the control panel. See page 111.
2
Remove the right top cover. See page 101.
3
Remove two silver screws (callout 1).
4
Lift the left top cover up, and then pull it toward the right side of the printer to release two locating
tabs (on the underside of the cover, at the left edge).
Figure 39.
Left top cover
To reinstall
Be sure to feed the control-panel cable up and through the hole (callout 2) in the left top cover.
Insert the three locating tabs (on the underside of the cover, at the left edge) into the locating
holes on the top of the printer.
2
1
2
2
2
1