HP LaserJet 9040/9050 Service Manual - Page 121
Right door,
View all HP LaserJet 9040/9050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Right door 1 Remove tray 1 if it is installed. See page 125. 2 Open the right door. 3 Pinch and then push the two tabs (callout 1) on the end of the black strap to release the strap ends. If you have difficulty, use needle-nose pliers. 4 Disconnect the four locator tabs (callout 2) on the cable cover, and then remove the cable cover. 12 2 Figure 42. Note Right door (1 of 2) 5 Unplug two multiple-wire cable connectors (callout 3). Do not remove the single grounding cable (callout 4). 6 Lift the right door up and off of the two hinges, and remove it from the printer. 23 24 Figure 43. Right door (2 of 2) Covers 105
Covers
105
Right door
1
Remove tray 1 if it is installed. See page 125.
2
Open the right door.
3
Pinch and then push the two tabs (callout 1) on the end of the black strap to release the strap
ends. If you have difficulty, use needle-nose pliers.
4
Disconnect the four locator tabs (callout 2) on the cable cover, and then remove the cable cover.
Figure 42.
Right door (1 of 2)
5
Unplug two multiple-wire cable connectors (callout 3).
Note
Do not remove the single grounding cable (callout 4).
6
Lift the right door up and off of the two hinges, and remove it from the printer.
Figure 43.
Right door (2 of 2)
2
2
2
1
2
2
4
3