HP LaserJet 9040/9050 Service Manual - Page 123
Left door and diverter, CAUTION,
View all HP LaserJet 9040/9050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Note CAUTION Left door and diverter If the 3,000-sheet stacker, 3,000-sheet stapler/stacker, or multifunction finisher is installed, move it away from the printer to gain access to the left door and diverter. 1 Open the left door. Make sure that you do not drop the pins (callout 1) that are on the end of each spring-loaded rod. 2 Grasp the two spring-loaded rods (callout 2), push them in toward the printer, and then pull them down and away from the printer. 3 Lift the left side of the door to a 45° angle and remove the left hinge (callout 3). 4 Slide the door toward the left and out of the right hinge (callout 4). 32 42 2 12 Figure 45. Left door Covers 107
Covers
107
Left door and diverter
Note
If the 3,000-sheet stacker, 3,000-sheet stapler/stacker, or multifunction finisher is installed, move it
away from the printer to gain access to the left door and diverter.
1
Open the left door.
CAUTION
Make sure that you do not drop the pins (callout 1) that are on the end of each spring-loaded rod.
2
Grasp the two spring-loaded rods (callout 2), push them in toward the printer, and then pull them
down and away from the printer.
3
Lift the left side of the door to a 45° angle and remove the left hinge (callout 3).
4
Slide the door toward the left and out of the right hinge (callout 4).
Figure 45.
Left door
2
2
2
4
3
2
2
1