HP LaserJet 9040/9050 Service Manual - Page 171

Note Rollers (pickup, feed, and separation) 1 Remove tray 4. See page 154. 2 Locate the appropriate roller on the upper right side of the tray cavity. The pickup roller (callout 1), feed roller (callout 2), and separation roller (callout 3) are all type 2 rollers. To gain access to the separation roller, slide the blue roller shield toward the back of tray 4 (as shown in figure 105). 3 Pinch the tab on the end of each roller to release it. 4 Slide the roller off of the shaft. 12 2 32 Figure 105. Rollers To reinstall z You do not need to slide the blue shield back over the separation roller. It will reset automatically. z Make sure that each roller is locked in place by attempting to remove it without first pinching the tab. Tray 4 155