HP LaserJet 9040/9050 Service Manual - Page 62

System setup submenu Items in this menu affect the printer function. Configure the printer according to your printing needs. Item Values Explanation DATE/TIME (HP LaserJet 9040/9050 only) DATE DATE FORMAT TIME TIME FORMAT Sets the date and time for the printer. The Real Time Clock is set to Greenwich Mean Time (GMT). JOB STORAGE LIMIT=32 1 to 100 Specifies the number of jobs that can be stored on the printer hard-disk accessory. JOB HELD TIMEOUT= OFF OFF 1 HOUR 4 HOURS 1 DAY 1 WEEK Sets the length of time that quick copy, proof and hold, private, and stored jobs are kept before being automatically deleted from the queue. SHOW ADDRESS=OFF (HP LaserJet 9040/9050 only) AUTO OFF Sets whether or not the printer IP address appears with the Ready message. If this value is "on," the address of the EIO card in slot 1 is shown. TRAY BEHAVIOR (HP LaserJet 9040/9050 only) USE REQUESTED TRAY MANUAL FEED PROMPT PS DEFER MEDIA Specifies the behavior of the tray by indicating which tray the printer should print from. USE REQUESTED TRAY sets the tray that the printer should print from for specified jobs. The values for this menu item are EXCLUSIVELY (default) and FIRST. MANUAL FEED PROMPT determines whether or not the product prompts the user when a job does not match a requested configured tray. The values for this menu item are ALWAYS (default) or UNLESS LOADED. PS DEFER MEDIA sets whether the paper-handling model is based on PostScript rules or HP rules. The values for this menu item are ENABLED (default) and DISABLED. SLEEP DELAY=90 MINUTES POWERSAVE TIME=1 HOUR (HP LaserJet 9000 only) 1 MINUTE 15 MINUTES 30 MINUTES 60 MINUTES 90 MINUTES 2 HOURS 4 HOURS Set how long the printer remains idle before it enters Sleep mode. The Sleep mode minimizes the amount of power that the printer consumes when it is idle and reduces wear on the printer electronic components. When you send a print job, press a control-panel button, open a paper tray, or open the top cover, the printer automatically exits Sleep mode. Note Sleep turns off the backlight on the display, but the display is still readable. WAKE TIME SUBMENU (HP LaserJet 9040/9050 only) SETTING WAKE TIME Sets the time that the printer automatically comes out of Sleep mode. This feature can be set for a different time for each day of the week. 46 Chapter 3 Product configuration