HP LaserJet 9040/9050 HP LaserJet MFPs and Digital Senders - Automatic Dayligh
HP LaserJet 9040/9050 - Multifunction Printer Manual
View all HP LaserJet 9040/9050 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP LaserJet 9040/9050 manual content summary:
- HP LaserJet 9040/9050 | HP LaserJet MFPs and Digital Senders - Automatic Dayligh - Page 1
MFPs and Digital Senders - Automatic Daylight Saving Time adjustment Security Level: Public Date Written/Updated: October 24, 2007 Document Summary D This document describes the automatic Daylight Saving Time enhancement in LaserJet MFPs. The feature is included in the latest firmware for the - HP LaserJet 9040/9050 | HP LaserJet MFPs and Digital Senders - Automatic Dayligh - Page 2
settings are also allowed. The device can be configured via the control panel, the EWS (Embedded Web Server), or WJA (Web Jetadmin). Detailed Instructions: HP recommends using the EWS or WJA to configure the device. Both of these methods allow the user to verify the start and end dates for Daylight - HP LaserJet 9040/9050 | HP LaserJet MFPs and Digital Senders - Automatic Dayligh - Page 3
There are normally four tabs across the top. If only the Information tab is visible (as above), you must Log In, using the device's EWS password. Click on the Settings tab, then select Date & Time from the left side: Page 3 of 9 white paper - HP LaserJet 9040/9050 | HP LaserJet MFPs and Digital Senders - Automatic Dayligh - Page 4
The firmware versions listed in the Release 1 column in the table will display GMT as the time zone for an unconfigured device. The Release 2 versions set the time zone for an un-configured device to "Not Configured". Note: Clock Drift Correction does not adjust for Daylight Saving Time. Page 4 of - HP LaserJet 9040/9050 | HP LaserJet MFPs and Digital Senders - Automatic Dayligh - Page 5
Click on the Advanced button at the bottom to access the Date & Time - Advanced screen: Page 5 of 9 white paper - HP LaserJet 9040/9050 | HP LaserJet MFPs and Digital Senders - Automatic Dayligh - Page 6
return to the Date & Time - Advanced screen. You can now verify, or customize the start and end dates by clicking on Start Date/End Date: Page 6 of 9 white paper - HP LaserJet 9040/9050 | HP LaserJet MFPs and Digital Senders - Automatic Dayligh - Page 7
OK after selecting your time zone, the Start and End Dates will reflect the previously selected time zone. Using WJA: The screenshot below is the Configuration screen for WJA 8.X. All settings are entered from this screen. Page 7 of 9 white paper - HP LaserJet 9040/9050 | HP LaserJet MFPs and Digital Senders - Automatic Dayligh - Page 8
, separate menu items exist for Time Zone and Adjust for Daylight Saving Time in the Configure Device/System Setup/Date & Time menu. Setting the time zone via the control panel is not recommended with these releases. Please refer to Known issues with Release 2 below. Page 8 of 9 white paper - HP LaserJet 9040/9050 | HP LaserJet MFPs and Digital Senders - Automatic Dayligh - Page 9
screen on the control panel. Release 1 displays the Time Zone screen, but the user could select Cancel. This leaves the time zone setting at its default value of GMT, but the DST settings are not actually configured for GMT. Release 2 sets the default time zone to Not Configured, making it easier
white paper
LaserJet MFPs and
Digital Senders
-
Automatic Daylight Saving
Time adjustment
Security Level:
Public
Date Written/Updated:
October 24, 2007
Document Summary
This document describes the automatic Daylight Saving Time enhancement in LaserJet MFPs.
The
feature is included in the latest firmware for the following models:
LJ4345mfp, CLJ4730mfp,
LJ9040/9050mfp, CLJ9500mfp, M3027/3035 MFP, M4345 MFP, M5025/5035 MFP,
CM4730 MFP, DS9200C, and DS9250C.
The latest firmware releases for many LaserJet MFPs and digital senders include
automatic Daylight Saving Time adjustment.
The products below have the enhancement
in the firmware releases listed.
Release 1 has the basic functionality. Release 2 contains
additional fixes listed at the end of this document.
Newer releases (higher numbers)
will include the feature.
Product
Release 1*
Release 2
4345mfp
09.081.5
09.091.4
9050mfp
08.081.5
08.091.3
4730mfp
46.161.6
46.171.3
9500mfp
08.081.5
08.091.3
M3027/3035 MFP
48.031.6
48.041.3
M4345 MFP
48.031.7
48.041.4
M5025/5035 MFP
48.031.7
48.041.4
CM4730 MFP
50.011.6
50.021.4
DS9200C
09.081.4
09.091.4
DS9250C
48.021.6
48.031.3
*Note:
A change was made for manufacturing after release.
Firmware obtained from
hp.com may be lower by one in the last digit when compared to new units.
The two
firmware versions are functionally identical.
Page 1 of 9
white paper