HP LaserJet E50000 Formatter Install Guide
HP LaserJet E50000 Manual
 |
View all HP LaserJet E50000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP LaserJet E50000 manual content summary:
- HP LaserJet E50000 | Formatter Install Guide - Page 1
F2A76-67910 (M527) F2A68-67915 (M506n/dn) F2A68-67916 (M506x) Lea esto primero www.hp.com/support/lj506 www.hp.com/support/ljM527MFP CAUTION: Electrostatic sensitive (ESD) parts. Always touch the sheet-metal chassis to provide a static ground before touching an ESD-sensitive part. 1 - HP LaserJet E50000 | Formatter Install Guide - Page 2
3 4 5 NOTE: M527 fax models only. For all other models, skip this step and go to step 7. Disconnect three connectors (callout 1). Pinch the retainer to release it. 2 - HP LaserJet E50000 | Formatter Install Guide - Page 3
6 7 Rotate the connector end of the fax PCA out and away from the formatter (callout 1), and then slide it as shown (callout 2) to remove it. NOTE: Hard-disk drive (HDD) models only. For all other models, skip this step and go to Step 9. Release the locking connector (callout 1), and - HP LaserJet E50000 | Formatter Install Guide - Page 4
12 13 M527 only: Pull the DIMM down and away from the holder to remove it. IMPORTANT: Take note of all empty connectors on the formatter before disconnecting any wire harnesses or flat-flexible cables (FFCs). Some empty connectors might not be visible until other items-like the hard-disk - HP LaserJet E50000 | Formatter Install Guide - Page 5
18 19 1 Rotate the bottom edge of the DIMM toward the holder (callout 1), and then make sure that the two locking arms snap into place (callout 2). NOTE: M506 printers and M527dn models only. For all other models, skip this step and go to Step 20. Align the connector on the replacement eMMC ( - HP LaserJet E50000 | Formatter Install Guide - Page 6
22 23 Make sure that the locking connector (callout 1) latches and that the standoff (callout 2) engages with the slot in the formatter (it might be necessary to pinch the retainer to engage it with the slot). NOTE: M527 fax models only. For all other models, skip this step and go to - HP LaserJet E50000 | Formatter Install Guide - Page 7
28 Slide the formatter cover towards the front of the printer to install it. 29 30 7 - HP LaserJet E50000 | Formatter Install Guide - Page 8
© Copyright 2015 HP Development Company, L.P. www.hp.com *F2A76-90989* *F2A76-90989* )$ 8
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
1
1
±²±
±²³
±²±
±²³
2
CAUTION:
Electrostatic sensitive (ESD) parts. Always touch the
sheet-metal chassis to provide a static ground
before
touching
an ESD-sensitive part.
F2A76-67910
(M527)
F2A68-67915
(M506n/dn)
F2A68-67916
(M506x)
Lea esto primero
www.hp.com/support/lj506
www.hp.com/support/ljM527MFP