HP LaserJet Enterprise 500 Service Manual - Page 360

Trays menu In the following table, asterisks (*) indicate the factory default setting. Table 3-19 Trays menu First level Second level Values Manage Trays Use Requested Tray Exclusively* First Description The product automatically prompts you to configure a tray for paper type and size in the following situations: ● When you load paper into the tray ● When you specify a particular tray or media type for a print job through the printer driver or a software program and the tray is not configured to match the print-job's settings NOTE: The prompt does not appear if you are printing from Tray 1, and it is configured for the Any Size and Any Type settings. In this situation, if the print job does not specify a tray, the product prints from Tray 1, even if the paper size and type settings in the print job do not match the paper loaded in Tray 1. You can configure the trays for type and size without a prompt from the product. NOTE: Labels on each tray indicate the correct way to load paper. If you change the size or type of paper that is loaded in the tray, you need to configure the tray for the new size or type. NOTE: Before using any paper, verify that it is of good quality and is free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, curls, or bent corners. 324 Chapter 3 Solve problems ENWW