HP LaserJet Enterprise 500 Service Manual - Page 378

Table 3-21 General Settings menu (continued) First level Second level Third level Line Voltage Fourth level Tray 1 Background Values Normal* Low Voltage Normal* Alternate Normal* Alternate 1 Alternate 2 Alternate 3 Description Enable this feature if the product is operating in a low voltage environment and you are having problems with print quality such as blisters in the printed image. This feature affects how often the product performs an internal cleaning procedure. Set this feature to Alternate if you are having problems with extra toner on pages. The product performs the cleaning procedure after each job that is printed from Tray 1. Using this mode increases wear on all the print cartridges. Use this setting if pages are printing with a shaded background. Using this feature might reduce gloss levels. The default setting is Normal. Use the Alternate 1 setting if you are seeing a shaded background on the entire page. Use the Alternate 2 setting if you are seeing thin vertical lines on the background. The Alternate 3 setting applies the Alternate 1 and Alternate 2 settings at the same time. Use this setting if the first two settings do not correct the problem. 342 Chapter 3 Solve problems ENWW