HP LaserJet Enterprise 500 Service Manual - Page 385

Retrieve From USB Settings menu Table 3-22 Retrieve From USB Settings menu First level Second level Enable Retrieve from USB Values Enable Disable* General Print Settings menu In the following table, asterisks (*) indicate the factory default setting. Table 3-23 General Print Settings menu First level Second level Values Manual Feed Enabled Disabled* Courier Font Wide A4 Print PS Errors Print PDF Errors Regular* Dark Enabled Disabled* Enabled Disabled* Enabled Disabled* Description Use this feature to enable or disable the manual-feed feature, which allows the user to feed paper into the product by hand. When this feature is enabled, the user can select manual feed from the control panel as the paper source for a job. If a tray is not specified as part of a job, manual feed is selected. The factory default value for this option is Disabled. Use this feature to select which version of the Courier font you want to use. The factory default setting is Regular, which uses an average stroke width. The Dark setting can be used if a heavier Courier font is needed. Use this feature to change the printable area of A4-size paper. If you enable this option, eighty 10-pitch characters can be printed on a single line of A4 paper. The factory default setting is Disabled. Use this feature to select whether a PostScript (PS) error page is printed when the product encounters a PS error. The factory default setting is Disabled. Use this feature to select whether a PDF error page is printed when the product encounters a PDF error. The factory default setting is Disabled. ENWW Tools for troubleshooting 349