HP LaserJet Enterprise 500 Service Manual - Page 426

Table 3-32 Calibrate/Cleaning menu (continued) First level Second level Full Calibration Values Delay Calibration at Wake/Power On Yes* No 390 Chapter 3 Solve problems Description The product automatically calibrates itself at various times. However, you can calibrate the product immediately if you see problems with print quality. Use this feature to perform a full calibration, which can take up to three minutes. Use this calibration if the color layers seem to be shifted on the page. Before calibrating the product, make sure that Ready appears on the control-panel display. If a job is in progress, the calibration occurs when that job is complete. This menu controls the timing of Power-on calibration when the product wakes up or is turned on. Select this menu item if you are not using the Wake Time feature and want to print jobs immediately when the product wakes up or is turned on, before calibration begins. ● Select No to have the product calibrate immediately when it wakes up or is turned on. The product will not print any jobs until it finishes calibrating. ● Select Yes to enable a product that is asleep to accept print jobs before it calibrates. It may start calibrating before it has printed all the jobs it has received. This option allows quicker printing when coming out of sleep mode or when you turn the product on, but print quality might be reduced. NOTE: For the best results, allow the product to calibrate before printing. Print jobs performed before calibration may not be of the highest quality. ENWW