HP LaserJet Enterprise 600 Service Manual - Page 403

Table 3-34 MP modes under the Adjust Paper Types sub menu (continued) HUMIDITY MODE With glossy film, set to High when the product is in a highhumidity environment and print-quality defects occur on HP Tough Paper or Opaque film. With transparencies, set to High when the product is in a high-humidity environment and print-quality defects occur on color transparencies on the first page of a print job. With all other paper types, set to High when the product is in a high-humidity environment and light density occurs on the first page of a print job. FUSER TEMP MODE If you are seeing a faint image of the page repeated at the bottom of the page or on the following page, first make sure the Paper Type and Print Mode settings are correct for the type of paper you are using. If you continue to see ghost images on your print jobs, set the Fuser Temp feature to one of the Alternate settings. Try the ALTERNATE 1 setting first and see if it solves the problem. If you continue to see the problem, try ALTERNATE 2 and then ALTERNATE 3. Using the ALTERNATE 2 and ALTERNATE 3 settings might cause an extra delay between jobs. Table 3-35 MP modes under the Optimize submenu LINE DETAIL Use this setting to improve line detail. RESTORE OPTIMIZE Use this setting to restore default settings. ENWW Use manual print modes 379