HP LaserJet Enterprise 600 Service Manual - Page 408

Table 3-36 Image defect examples (continued) Problem Image example Solution Page skew 1. Print a few more pages to see if the problem corrects itself. 2. Verify that no torn pieces of paper are inside the product. 3. Make sure that paper is loaded correctly and that all adjustments have been made. Make sure that the guides in the tray are not too tight or too loose against the paper. 4. Turn over the paper in the tray. Also, try rotating the paper 180°. 5. Make sure that the type and quality of the paper you are using meet HP specifications. 6. Make sure that the environmental specifications for the product are being met. 7. If the error persists, replace the registration assembly. Curl or wave 1. Turn over the paper in the tray. Also, try rotating the paper 180°. 2. Make sure that the type and quality of the paper you are using meet HP specifications. 3. Make sure that the environmental specifications for the product are being met. 4. Try printing to a different output bin. 5. Open the following menus: ◦ Administration ◦ General Settings ◦ Print Quality ◦ Adjust Paper Types ● Scroll to the desired paper type, and then press the OK button. ◦ Print Mode ● Scroll to the print mode, and then press the OK button. 384 Chapter 3 Solve problems ENWW