HP LaserJet Enterprise 700 HP LaserJet Enterprise 700 M712 - User Guide - Page 120
Con IP network settings, Printer sharing disclaimer, View or change network settings
View all HP LaserJet Enterprise 700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Configure IP network settings Printer sharing disclaimer HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating systems and not of the HP print drivers. Go to Microsoft at www.microsoft.com. View or change network settings Use the HP Embedded Web Server to view or change IP configuration settings. 1. Print a configuration page, and locate the IP address. ● If you are using IPv4, the IP address contains only digits. It has this format: xxx.xxx.xxx.xxx ● If you are using IPv6, the IP address is a hexadecimal combination of characters and digits. It has a format similar to this: xxxx::xxxx:xxxx:xxxx:xxxx 2. To open the HP Embedded Web Server, type the IP address into the address line of a Web browser. 3. Click the Networking tab to obtain network information. You can change settings as needed. Manually configure IPv4 TCP/IP parameters from the control panel Use the control-panel Administration menus to manually set an IPv4 address, subnet mask, and default gateway. 1. On the product control panel, press the Home button. 2. Open the following menus: ● Administration ● Network Settings ● Jetdirect Menu ● TCP/IP ● IPV4 Settings ● Config Method 3. Highlight the Manual option, and then press the OK button. 4. Highlight the Manual Settings menu, and then press the OK button. 5. Select the IP Address, Subnet Mask, or Default Gateway option. 110 Chapter 6 Manage the product ENWW