HP LaserJet Enterprise P3015 HP QuickPage - HP Embedded Web Server (EWS) Confi
HP LaserJet Enterprise P3015 Manual
View all HP LaserJet Enterprise P3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP LaserJet Enterprise P3015 manual content summary:
- HP LaserJet Enterprise P3015 | HP QuickPage - HP Embedded Web Server (EWS) Confi - Page 1
HP AutoSend, a standard feature in the device firmware on many workgroup HP LaserJets, can be used to provide this capability. This document provides a step-by-step guide to configure HP AutoSend on HP printers networking section or under the "Embedded JetDirect" section. 2. Gather SMTP server - HP LaserJet Enterprise P3015 | HP QuickPage - HP Embedded Web Server (EWS) Confi - Page 2
Example: If the domain name is HP.com, Device email address would be "[email protected]" e) Click Apply. 2. After setting the SMTP server (as shown here) with the 2-letter code for your country-specific email address. To find the country-specific code, please refer to the table of email addresses at the - HP LaserJet Enterprise P3015 | HP QuickPage - HP Embedded Web Server (EWS) Confi - Page 3
2.c. previously in this document and click Apply. Section 2 Use the following steps to configure HP AutoSend on these two printers: • HP Color LaserJet CM4540 MFP • HP Color LaserJet CP5520 Series Steps 1. Launch a browser (Internet Explorer 6.0 or greater) and connect to the device home page - HP LaserJet Enterprise P3015 | HP QuickPage - HP Embedded Web Server (EWS) Confi - Page 4
c) If the SMTP server is already known, choose the first option and click Next. If the SMTP server IP is not already known, choose the second option that looks for an SMTP server and click Next. d) Provide the SMTP server and port (if asked). Use "25" for the port if no other is evident. If required - HP LaserJet Enterprise P3015 | HP QuickPage - HP Embedded Web Server (EWS) Confi - Page 5
e) Choose the required Server Authentication. If the SMTP server requires authentication, provide the username and password. 5 - HP LaserJet Enterprise P3015 | HP QuickPage - HP Embedded Web Server (EWS) Confi - Page 6
f) Click Finish. 2. After setting the SMTP server details: a) Navigate to General > AutoSend. b) Select Enable AutoSend check box and configure to send every 1 day (as shown below). 6 - HP LaserJet Enterprise P3015 | HP QuickPage - HP Embedded Web Server (EWS) Confi - Page 7
the Recipient's email address: [email protected]. Replace the "XX" (as shown here) with the 2-letter code for your country-specific email address. To find the country-specific code, please refer to the table of email addresses at the end of this document. e) Click Apply. NOTE To ensure - HP LaserJet Enterprise P3015 | HP QuickPage - HP Embedded Web Server (EWS) Confi - Page 8
information, please select the destination email address specific to the country in which the AutoSend HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP
1
EMBEDDED WEB SERVER CONFIGURATION TO ENABLE
AUTOSEND AND OUTGOING EMAIL FOR HP QUICKPAGE
INTRODUCTION
To ensure accurate billing, the HP QuickPage program requires collection of the metered
information from the printers and multifunction products (MFPs) under contract. HP AutoSend, a
standard feature in the device firmware on many workgroup HP LaserJets, can be used to provide
this capability. This document provides a step-by-step guide to configure HP AutoSend on
HP printers and MFPs
ATTENTION:
It is very important that you follow all steps in this document and that the proper
email address for sending of the AutoSend report is entered into the
AutoSend “Email
Destinations”
CONFIGURATION STEPS
box in the final step.
Prerequisites
1.
Identify the IP address of the printer/MFP: Navigate through the menu in the display panel of
the device and print the configuration page. The IP of the device can be found under the
networking section or under the “Embedded JetDirect” section.
2.
Gather SMTP server details (server name, port, user name, and password if authentication is
required). This can be obtained from the IT admin of the client. This information is vital for
AutoSend to function.
Section 1
Use the following steps to configure HP AutoSend on HP printers and MFPs.
NOTE
Please refer to Section 2 for the following printers:
•
HP Color LaserJet CM4540 MFP
•
HP Color LaserJet CP5520 series
Steps
1.
Launch a browser (Internet Explorer 6.0 or greater) and connect to the device home page—
http://IPofTheDevice/ (for example, http://16.180.117.170/).
a)
Navigate to
Settings
>
Email server
and select
Enable outgoing email
to configure the
email server.
b)
Provide the SMTP server IP and port (if asked)
along with the domain name. Use “25” for
the port if no other is evident.
NOTE
On some models you will not see an input box for “Port”.
c)
If the SMTP server requires authentication, provide the username and password.
d)
The Return Email Address is required. The username must be the word “device” and the
customer network domain name should be entered into the Domain Name field.