HP LaserJet Pro CP1025 HP LaserJet Pro CP1020 - User Guide - Page 38

Connect to a network (network models only), Supported network protocols

Page 38 highlights

Connect to a network (network models only) The product can connect to wired or wireless networks. NOTE: You cannot connect to a wired and wireless network simultaneously. Wired connections take precedence. Supported network protocols To connect a networking-equipped product to a network, you need a network that uses one of the following protocols. ● TCP/IP (IPv4 or IPv6) ● Port 9100 ● LPR ● DHCP ● AutoIP ● SNMP ● Bonjour ● SLP ● WSD ● NBNS Install the product on a wired network Configure the IP address 1. Connect the network cable to the product and to the network. 2. Wait for 60 seconds before continuing. During this time, the network recognizes the product and assigns an IP address or host name for the product. 26 Chapter 4 Connect the product ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174

Connect to a network (network models only)
The product can connect to wired or wireless networks.
NOTE:
You cannot connect to a wired and wireless network simultaneously. Wired connections
take precedence.
Supported network protocols
To connect a networking-equipped product to a network, you need a network that uses one of the
following protocols.
TCP/IP (IPv4 or IPv6)
Port 9100
LPR
DHCP
AutoIP
SNMP
Bonjour
SLP
WSD
NBNS
Install the product on a wired network
Configure the IP address
1.
Connect the network cable to the product and to the network.
2.
Wait for 60 seconds before continuing. During this time, the network recognizes the product and
assigns an IP address or host name for the product.
26
Chapter 4
Connect the product
ENWW