HP LeftHand P4000 HP LeftHand SAN Solutions Support Document - Service Notes -
HP LeftHand P4000 - SAN Solutions Manual
 |
View all HP LeftHand P4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP LeftHand P4000 manual content summary:
- HP LeftHand P4000 | HP LeftHand SAN Solutions Support Document - Service Notes - - Page 1
HP LeftHand SAN Solutions Support Document Service Notes How to - Test SNMP with LeftHand SAN - HP LeftHand P4000 | HP LeftHand SAN Solutions Support Document - Service Notes - - Page 2
such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation - HP LeftHand P4000 | HP LeftHand SAN Solutions Support Document - Service Notes - - Page 3
3 Setup SNMP access 4 Test query access 5 Test traps reception 6 Troubleshoot Download MIBs If you are using SAN/iQ version 6.3, then the MIBs are placed in the installation folder of the Centralized Management Console by default. You can also download the MIBs from our ftp site at ftp://ftp - HP LeftHand P4000 | HP LeftHand SAN Solutions Support Document - Service Notes - - Page 4
Up SNMP Access Refer to the LeftHand SAN User's Manual or the online help in the Console and review Chapter 7. titled Using SNMP, for the guidelines to configure the SNMP General and SNMP Trap settings in the Console. The SNMP General settings allow you to configure the community string and access - HP LeftHand P4000 | HP LeftHand SAN Solutions Support Document - Service Notes - - Page 5
this command should return the software version NSM. For example, LEFTHAND-NETWORKS-NUS-COMMON-INFO-MIB:: Configure the remote copy monitoring variables (Remote IP Copy Status, Remote IP Copy Complete and Remote IP Copy Failover) to send SNMP traps. 2 Create a test remote copy within the management - HP LeftHand P4000 | HP LeftHand SAN Solutions Support Document - Service Notes - - Page 6
-STRING: 07 D5 0B 0B 0D 08 1C 00 2B 00 00 Troubleshoot • Verify that the server can ping NSMs. • Verify that NSMs can ping server. • Verify that the community string is the same on the NSM and the SNMP management application. • Verify that the correct IP addresses for the hosts are
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
HP LeftHand SAN Solutions
Support Document
Service Notes
How to – Test SNMP with LeftHand SAN