HP MPX200 HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A
HP MPX200 Manual
View all HP MPX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP MPX200 manual content summary:
- HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 1
HP StorageWorks MPX200 Multifunction Router User Guide This user guide describes the MPX200 Multifunction Router, which supports the EVA and XP families of Fibre Channel storage systems for integrated iSCSI connectivity, FCIP, FCoE (EVA only), and data migration. The MPX200 hardware is integrated - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 2
Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 3
53 iSCSI rules and supported maximums 53 EVA storage system rules and guidelines 54 HP Command View EVA management rules and guidelines 54 EVA storage system software ...55 Features supported for iSCSI hosts 55 Features not supported for iSCSI hosts 55 MPX200 Multifunction Router User Guide 3 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 4
98 Installing the Microsoft iSCSI initiator services and MPIO 98 Configuring the QLogic iSCSI HBA 99 Adding targets to the QLogic iSCSI initiator 101 Presenting LUNs to the QLogic iSCSI initiator 102 Installing the HP MPIO Full Featured DSM for EVA 102 Microsoft Windows Cluster support 103 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 5
GE, and management ports 142 Step 9. Verify FCIP links and firmware version 143 7 MPX200 FCoE feature description 145 FCoE configurations ...145 Setting up for FCoE connectivity 146 8 Diagnostics and troubleshooting 153 MPX200 chassis diagnostics ...153 MPX200 Multifunction Router User Guide 5 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 6
is illuminated 154 Fibre Channel Port LEDs ...154 Power-on self-test (POST) diagnostics 154 Heartbeat LED blink patterns 154 Locating the MPX200 blade 155 MPX200 log data ...156 MPX200 statistics ...156 MPX200 ping command 157 Troubleshooting using HP Command View EVA 157 Issues and solutions - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 7
...208 Traceroute ...209 B Command Line Interface usage 211 Logging on to an MPX200 ...211 Understanding the guest account 212 Working with MPX200 router configurations 213 Modifying a configuration 213 Saving and restoring router configurations 213 MPX200 Multifunction Router User Guide 7 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 8
...232 Sensor notification ...232 Generic notification ...233 D Log messages 235 E HP StorageWorks mpx100/mpx100b to MPX200 Upgrade 259 To upgrade from mpx100/mpx100b to the MPX200 Multifunction Router 259 F Regulatory compliance and safety 261 Regulatory compliance notices 261 Federal - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 9
notice ...269 Slovenian notice ...270 Spanish notice ...270 Swedish notice ...270 G Saving and restoring the MPX200 configuration 271 Saving the configuration using MPX200 CLI 271 Restoring the configuration using MPX200 CLI 272 Glossary 273 Index 277 MPX200 Multifunction Router User Guide 9 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 10
22 10 MPX200-XP multi-XP fabric-attached configuration 23 11 MPX200 components 28 12 Chassis rails ...29 13 Rack rails ...29 14 Inner rack view ...30 15 Rear view ...31 16 Power cord ...32 17 Bezel view ...33 18 Open zone configuration 36 19 Fibre Channel zone configuration 37 20 iSCSI devices - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 11
63 Configuration tab ...83 64 Firewall Properties dialog box 84 65 General Properties dialog box 85 66 Add Send Target Server dialog box 86 67 Rescan dialog box 87 68 iSCSI Initiator MPIO properties 97 69 Microsoft iSCSI Initiator Installation page 98 MPX200 Multifunction Router User Guide 11 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 12
with six MPX200 routers 127 94 HP Continuous Access EVA 3-site configuration with eight MPX200 routers 128 95 HP Continuous Access EVA 3-site configuration with six MPX200 router full peer-to-peer connectivity ...129 96 Setting IP addresses 140 97 FCIP License Add 140 98 FCoE end-to - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 13
156 112 FCIP route ping command 157 113 iSCSI controller properties 158 114 iSCSI controller properties: IP Ports tab 159 115 Virtual disk properties: Host details 160 116 iSCSI initiator properties: Targets tab 160 117 Class 1 laser product label 262 MPX200 Multifunction Router User Guide 13 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 14
numbers and options 16 2 MPX200 blade configurations 24 3 MPX200 supported configuration maximums 25 4 Supported MPX200 iSCSI maximums 54 5 Support for EVA storage system software with MPX200 iSCSI 56 6 EVA operating system and multipath software support 56 7 MPX200-XP operating system and - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 15
FCoE, and data migration capabilities are available for use. For more information on data migration, see the HP StorageWorks MPX200 Multifunction Router Data Migration Solution Guide. The MPX200 is available from HP factory-integrated with an EVA or XP24000/20000 storage system or as a field upgrade - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 16
, or order separately to upgrade existing storage systems AP774A TA766A TA767A HP StorageWorks MPX200 10-1GbE Upgrade Blade HP StorageWorks MPX200 Half Chassis FCIP License HP StorageWorks MPX200 Full Chassis FCIP License • one 10-GbE/1-GbE blade with two 10-GbE and two 1-GbE iSCSI ports, and two - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 17
the license to migrate 5 TB of data using a MPX200 Chassis. Includes the license to migrate data from or to a single array using a MPX200 Chassis. Includes the license to migrate data from or to a single array on three unique migration jobs using an MPX200. MPX200 Multifunction Router User Guide 17 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 18
an MPX200 FC port and an EVA requires the EVA controller port to be set to Direct. Figure 1 illustrates an MPX200 single-blade fabric-attached configuration. This is the lowest-cost configuration and is used when high availability for iSCSI hosts is not required. 18 MPX200 Multifunction Router - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 19
-blade configuration may require reconfiguration of device mappings. Figure 2 MPX200 dual-blade fabric-attached configuration . Figure 3 illustrates a multi-EVA configuration with connectivity for up to four EVA storage systems from a single MPX200 blade. MPX200 Multifunction Router User Guide 19 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 20
to four EVA storage systems from dual MPX200 blades. This configuration provides high availability with failover between blades. Figure 4 MPX200 dual-blade multi-EVA configuration . Figure 5, Figure 6, and Figure 7 illustrate EVA direct connect configurations. 20 MPX200 Multifunction Router overview - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 21
iSCSI NIC EVA storage system FP1 FP2 A B FP1 FP2 26640a Figure 6 MPX200 single-blade direct connect to one EVA configuration . MGMT MPX200 HP StorageWorks MPX200 GE4 GE3 blade 1 GbE Blade MPX200 Multifunction Router 1 MGMT MPX200 HP StorageWorks MPX200 GE4 GE3 blade 1 GbE Blade MPX200 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 22
. This configuration provides high availability with failover between blades. Figure 9 MPX200-XP dual-blade fabric-attached configuration . Figure 10 shows a multi-XP configuration with connectivity for up to four XP storage systems from a single MPX200 blade. 22 MPX200 Multifunction Router overview - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 23
Figure 10 MPX200-XP multi-XP fabric-attached configuration . MPX200 Multifunction Router User Guide 23 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 24
. 3Dual-blade DMS (data migration services) configurations are always configured for separate operation. NOTE: For more information on data migration, see the HP StorageWorks MPX200 Multifunction Router Data Migration Solution Guide. Table 3 describes the MPX200 supported configuration maximums - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 25
all iSCSI ports for both 1-GbE and 10-GbE blades. If multiple 1-GbE initiators are required, ensure that logins are spread across all 1-GbE ports. For 10-GbE blades, you can place a higher number of initiators on the 10-GbE ports than on the 1-GbE ports. MPX200 Multifunction Router User Guide 25 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 26
use of bandwidth throttling for data migration or MPIO for iSCSI provides a mechanism to allocate FC bandwidth to each function. 10-GbE initiators HP recommends that you map servers with 10-GbE NICs for login to the 10-GbE ports on the MPX200. CHAP security You can configure the Challenge Handshake - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 27
temperature of the rack environment may be greater than the ambient temperature. Be sure to install the chassis in an environment that is compatible with the maximum ambient rated temperature. MPX200 components Figure 11 shows the MPX200 components. MPX200 Multifunction Router User Guide 27 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 28
holes only 2. Rack rail, outer (2) 4. Screw, flathead, 6-32 x 1/4 in. (8) 6. Screw, panhead, 10-32 x 3/8 in. (10) Figure 11 MPX200 components . Rack mounting the MPX200 NOTE: Use a crosshead screwdriver to perform the rack mount procedure. To rack mount the MPX200: 28 Installing the MPX200 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 29
, 10-32 x 1/4 in. Figure 12 Chassis rails . 2. Assemble the front and rear rack rails; secure them loosely using four 6-32 x 1/4 in. screws (Figure 13). 1. Rear rack rail 3. Screw, flathead, 6-32 x 1/4 in. Figure 13 Rack rails . 2. Front rack rail MPX200 Multifunction Router User Guide 29 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 30
rail is toward the front of the rack. c. Fasten the rail flanges to the rack on both ends using two 10-32 x 3/8 in. screws in the upper and lower holes (Figure 14). 1. Screw, flathead, 6-32 x 1/4 in. 3. Washer Figure 14 Inner rack view . 2. Screw, panhead, 10-32 x 3/8 in. 30 Installing the MPX200 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 31
, slide the MPX200 chassis and rail assembly into the rack rails. b. Fasten the chassis to the rack using two 10-32 x 3/8 in. screws in the middle hole on each rail flange (Figure 15). 1 1 1. Screws, panhead, 10-32 x 3/8 in. Figure 15 Rear view . 26588b MPX200 Multifunction Router User Guide 31 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 32
chassis and the chassis rail (see Figure 16). c. Repeat for the right blade. NOTE: The right blade requires the power cord to extend approximately 12 in. (30 cm) beyond the front edge, due to the positioning of the socket on the PCM. 1 1. Power cord Figure 16 Power cord . 32 Installing the MPX200 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 33
on each side of the bezel support plate. d. Install the bezel by pushing it through the white pop-in tabs on the bezel support plate (Figure 17). 1. Screw, panhead, 10-32 x 3/8 in. 3. Bracket arrows Figure 17 Bezel view . 2. Bezel mount bracket 4. Bezel MPX200 Multifunction Router User Guide 33 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 34
34 Installing the MPX200 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 35
Because the MPX200 can be a fabric-connected device, it is important to understand the zoning requirements. Open zoning When using an open zone configuration, each FC port on each MPX200 must be connected to a separate fabric (see Figure 18 on page 36). MPX200 Multifunction Router User Guide 35 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 36
Figure 18 Open zone configuration . Fibre Channel switch-based zoning Each FC port on the MPX200 uses N_Port ID Virtualization (NPIV) to create a path to the FC port on the router blade and gives you more control of load balancing through the router. 36 Managing the MPX200 using HP Command View EVA - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 37
the router FC ports are visible to the EVA, you can perform the MPX200 discovery. You discover the MPX200 iSCSI controllers using the Discover iSCSI Devices button or the Add iSCSI Device button (see Figure 20). Figure 20 iSCSI devices folder properties . MPX200 Multifunction Router User Guide 37 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 38
associated with each host consist of the VPGs from each blade. Figure 21 Host properties . In the IPv4 or IPv6 box, select Static and set the management port IP address. Figure 22 shows the Management Port tab on the iSCSI Controller Properties page. 38 Managing the MPX200 using HP Command View EVA - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 39
. Setting up the iSCSI IP ports Each iSCSI IP port must have an IP address-IPv4, IPv6, or both. Set the IP address on the IP Ports tab on the iSCSI Controller Properties page (see Figure 23). NOTE: A target portal is created for each IP address that you set. MPX200 Multifunction Router User Guide 39 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 40
Figure 23 iSCSI controller properties: IP Ports tab . Setting the date and time on the MPX200 Setting the date and time on the MPX200 ensures the synchronization of events and assists in troubleshooting. You have three options for setting the date and time (see Figure 24). NOTE: HP recommends using - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 41
controller. 2. Click the Code Load button. 3. Browse to the firmware file. 4. Click the Next Step button. 5. Click the Finish button. 6. In the dialog box, enter yes, and then click the Update button. The MPX200 reboots upon successful load of the firmware. MPX200 Multifunction Router User Guide 41 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 42
26). If you need to shut down the MPX200, click the Power down button (see Figure 26). Figure 26 iSCSI controller shutdown options . Saving or restoring the MPX200 configuration After initial setup of the MPX200, it is a good practice to save the configuration. The FRU Save function allows you to - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 43
4. Select the configuration method (see Figure 27). Figure 27 iSCSI controller configuration selection . Locating the MPX200 A flashing blue LED in the center of the blade indicates that the locating beacon is on. NOTE: The beacon turns off after 15 minutes. MPX200 Multifunction Router User Guide 43 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 44
1. Input fault LED 3. Heartbeat LED 5. 1-GbE iSCSI ports 7. 8-Gb/s FC ports 9. RS-232 port 2. System power LED 4. 1-GbE iSCSI ports 6. Maintenance button 8. UID beacon (LED) blue 10. Management port 10/100/1000 Ethernet Figure 28 Blue LED locating beacon . To enable or disable the locating beacon: - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 45
Figure 30 iSCSI controller options: Remove controller . MPX200 Multifunction Router User Guide 45 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 46
46 Managing the MPX200 using HP Command View EVA - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 47
connectivity. Once connected, select the desired blade to manage by using the blade command (see Figure 31). Figure 31 Use the blade # command . Use the admin start command to change settings (see Figure 32). Figure 32 The admin start command . MPX200 Multifunction Router User Guide 47 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 48
command (see Figure 34). Figure 34 The set iscsi command . Fibre Channel zoning See "Fibre Channel zoning" on page 35 and "Fibre Channel switch-based zoning" on page 36 for zoning information. World Wide Names used in zoning can be found in the MPX200 using the show vpgroups command (see Figure 35 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 49
Figure 35 The show vpgroup command . LUN management LUN masking for MPX200 connectivity to XP is accomplished by executing the following procedure. The MPX200 is treated as if it were a Windows FC host to the XP. MPX200 Multifunction Router User Guide 49 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 50
groups, each containing WWNs from each VPG from each MPX200 blade. LUNs can be created and assigned to the groups at this time. Figure 36 LUN management window . 2. Install the Microsoft iSCSI Initiator software. For Windows Server 2008, the iSCSI initiator is included with the operating system. For - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 51
by selecting Wizards from the menu. The LUN Presentation Wizard will display the XP target ports (see Figure 37). Figure 37 LUN Selection window . 6. Expand the desired ports and select the same LUN from each (see Figure 38). Figure 38 Expanded ports . MPX200 Multifunction Router User Guide 51 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 52
7. Select the initiator and finish (see Figure 39). Figure 39 Select the Initiators . 8. Follow the steps beginning with "Step 3" on page 65 to log in to the target. 52 Managing the MPX200 for XP 24000/20000 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 53
servers can be configured for access to one or both blades. NOTE: In the event of a failover between blades, servers with single-blade connectivity to a failed blade will no longer have connectivity to the MPX200. Table 4 lists the supported maximums. MPX200 Multifunction Router User Guide 53 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 54
are integrated in HP Command View EVA. IMPORTANT: The MPX200 requires a specific controlled release of HP Command View EVA. For more information and to receive the supported HP Command View EVA version, contact your HP service representative. 54 MPX200 iSCSI configuration rules and guidelines - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 55
supported for iSCSI hosts: • Mounting and unmounting LUNs through a host agent, which must be performed manually • Accessing the host view of storage (for example, viewing an F drive from a host) • Deploying host agents to allow users to launch a script on the iSCSI host MPX200 Multifunction Router - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 56
EVA HP StorageWorks Continuous Access EVA with HPsupported FCIP gateways iSCSI and Fibre Channel hosts and LUN remote replication are supported. XP storage system rules and guidelines The MPX200 is supported with the following XP storage systems: • XP24000 • XP20000 All MPX200 configurations must - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 57
the following: • Microsoft iSCSI initiator versions 2.08 and 2.07 • Microsoft iSCSI Initiator for Windows 2008, Vista, and Windows 7 • Multipath on MPX200 single-blade or dual-blade configurations iSCSI initiator operating system considerations follow: MPX200 Multifunction Router User Guide 57 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 58
automatically by the HP StorageWorks MPX200 for Enterprise Virtual Array Windows software kit, which is available at http://h18006.www1.hp.com/products/storageworks/evaiscsiconnect/index.html . CAUTION: Using the Registry Editor incorrectly can cause serious problems that may require reinstallation - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 59
Multi-initiator access to the same LUN via VMFS • VMware ESX server 4.0/3.5 native multipath solution based on NIC teaming iSCSI initiator operating system considerations follow: • Host-mode setting-VMware • Hardware iSCSI initiator (iSCSI HBA)-Not supported MPX200 Multifunction Router User Guide 59 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 60
/s or 10 GbE • IP data-LAN/VLAN support with less than 10 ms latency; maximum of two VLANs per port, one VLAN per protocol • IP management-LAN/WAN support • Dedicated IP network for iSCSI data • Jumbo frames NOTE: If you configure IPv6 on any MPX200 iSCSI port, you must also configure IPv6 on the HP - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 61
kit . For Windows Server 2003, the Microsoft iSCSI initiator installation presents an option for installing MPIO using the Microsoft generic DSM (Microsoft MPIO Multipathing Support for iSCSI check box). For Windows Server 2008, MPIO is installed separately. MPX200 Multifunction Router User Guide 61 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 62
window opens. d. Select the Discovery tab (Figure 42). Figure 42 iSCSI initiator properties: Discovery tab . e. In the Target Portals section, click Add. A dialog box opens. f. Enter the iSCSI port IP address. g. Click OK. The discovery is complete. 62 MPX200 iSCSI configuration rules and guidelines - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 63
host you created in Step 2.c. Note the circled number in the target IQN; it is referenced during initiator login. See Figure 44 and Figure 45. MPX200 Multifunction Router User Guide 63 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 64
Figure 44 Virtual disk properties . Figure 45 Host details . 64 MPX200 iSCSI configuration rules and guidelines - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 65
to choose the Local Adapter, Source IP, and Target Portal. The Target Portal IP Address is the iSCSI port that this initiator connection is defined. e. Depending on the operating system, open Server Manager or Computer Management. f. Select Disk Management. MPX200 Multifunction Router User Guide 65 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 66
lists the supported MPIO options for the MPX200. Table 10 MPIO options for the MPX200 Multipath support Windows Server 2008 HP MPIO Full Featured DSM for EVA (preferred) Supported Microsoft generic DSM Supported Windows Server 2003 Supported Supported 66 MPX200 iSCSI configuration rules and - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 67
, which does not require download or installation. To install the MPIO feature for Windows Server 2008: 1. Select the Multipath I/O check box on the Select Features page (Figure 47). Figure 47 Select Features page . 2. Click Next, and then click Install. MPX200 Multifunction Router User Guide 67 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 68
present a virtual disk to the initiator to enable the Add support for iSCSI devices check box (see Figure 48). Figure 48 MPIO Properties page before reboot . Figure 49 MPIO Properties page after reboot . 4. Reboot the system to MPIO the devices. 68 MPX200 iSCSI configuration rules and guidelines - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 69
to scale across multiple CPUs. The HP NC3xxx Multifunction Gigabit server adapters use SNP to support TCP off-load functionality. For support details, see the latest HP adapter information at http://h18004.www1.hp.com/products/ servers/networking/index.html. MPX200 Multifunction Router User Guide 69 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 70
. To set up SNP on a Windows 2003 server: 1. Following the manufacturer's installation instructions, install the hardware and software for the NC3xxx Multifunction Gigabit server adapter. 2. Download the SNP package from the Microsoft website: http://support.microsoft.com/kb/ 912222. • To start the - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 71
). Figure 51 Discover targets . b. Enter the static IP address of the mpx iSCSI port in the Address box, and then click Finish (Figure 52). Figure 52 Add static IP address . c. Select a target from the Discovered Targets list and then click Add (Figure 53). MPX200 Multifunction Router User Guide 71 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 72
mpx iSCSI port may present several iSCSI targets to the Xtend SAN iSCSI Initiator. Select only one target from the list. d. For ISNS discovery Select Initiator and then enter the iSNS name or IP address in the box (Figure 54). Figure 54 iSNS discovery and verification . 72 MPX200 iSCSI configuration - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 73
MPX targets appears under Discovered Targets (Figure 55). Figure 55 Discovered Targets . NOTE: The MPX iSCSI port may present several iSCSI targets to the Xtend SAN iSCSI configure the initiator to automatically log in to the iSCSI target at system startup. MPX200 Multifunction Router User Guide 73 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 74
. Figure 56 Selecting the newly added target . k. Click Status, select the network node, and then click Login to connect to the MPX target (Figure 57). The target status is Connected and the target status light turns green. Figure 57 Select status . 74 MPX200 iSCSI configuration rules and guidelines - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 75
Installing and configuring the SUSE Linux Enterprise 10 iSCSI driver Configure the initiator using the built-in GUI-based tool or the open-iscsi administration utility using the iscsiadm command. For detailed command information, see the iscsiadm (8) man pages. MPX200 Multifunction Router User Guide - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 76
under Network Services), and then set the initiator to start at boot time (Figure 59). Figure 59 Configure the iSCSI initiator and targets . 3. Select the Discovered Targets tab and enter the iSCSI target IP address (Figure 60). Figure 60 Discovered Targets tab . 76 MPX200 iSCSI configuration rules - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 77
4. Log in to the target (Figure 61). Figure 61 Log in to the target . MPX200 Multifunction Router User Guide 77 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 78
configure the iSCSI driver for Red Hat 5: 1. Use the iscsiadm command to control discovery and connectivity: # iscsiadm -m discovery -t st -p 10.6.0.33:3260 2. Edit the initiator name: # vi /etc/iscsi/initiatorname.iscsi 3. Start the iSCSI service: # service iscsi start 78 MPX200 iSCSI configuration - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 79
a previous version of an iSCSI driver, HP recommends that you remove the /etc/.iscsi file before installing the new driver. For the latest version of the Linux driver for EVA iSCSI connectivity, see: http://sourceforge.net/projects/linux-iscsi MPX200 Multifunction Router User Guide 79 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 80
driver supports both Red Hat 3 and SUSE 8. For information on how to configure the Linux iSCSI ROM device node, if any, for the LUN (for example, /dev/scd0). • The symbolic link generic maps to the SCSI generic device node, if any, for the LUN (for example, /dev/sg0). 80 MPX200 iSCSI configuration - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 81
directly mounting SCSI devices, HP recommends that you do one of the following: • Mount the /dev/iscsi symlink tree. • Mount the file system UUIDs or labels (see the man pages for mke2fs, mount, and fstab). • Use the Logical Volume Manager (see Linux LVM). MPX200 Multifunction Router User Guide 81 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 82
the ESX server VMkernel and uses standard 10GigE/GigE NICs to connect to the MPX200. To set up software-based iSCSI storage connectivity: 1. Install the appropriate license from VMware to enable iSCSI software driver using the VMware instructions. 82 MPX200 iSCSI configuration rules and guidelines - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 83
for iSCSI support. Configure the VMkernel service console with dedicated virtual switch with a dedicated NIC for iSCSI data traffic. Follow the instructions from VMware. Figure 63 on page 83 shows an example of a configuration. Figure 63 Configuration tab . MPX200 Multifunction Router User Guide 83 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 84
Security Profile. c. Click the Properties link. The Firewall Properties dialog box is displayed. See Figure 64 on page 84. d. Select the check box for Software iSCSI to enable iSCSI traffic. e. Click OK. Figure 64 Firewall Properties dialog box . 84 MPX200 iSCSI configuration rules and guidelines - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 85
the software adapter. The iSCSI Initiator Properties dialog box is displayed. e. Click Configure. The General Properties dialog box is displayed. See Figure 65 on page 85. f. Select the Enabled check box. g. Click OK. Figure 65 General Properties dialog box . MPX200 Multifunction Router User Guide - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 86
the Dynamic Discovery tab. c. Click Add to add a new iSCSI target. The Add Send Target Server dialog box is displayed. See Figure 66 on page 86. d. Enter the iSCSI IP address of the MPX200. e. Click OK. Figure 66 Add Send Target Server dialog box . 86 MPX200 iSCSI configuration rules and guidelines - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 87
with the Solaris 10 iSCSI initiator to the MPX200. For details on managing and troubleshooting Solaris iSCSI multipath devices, see the Solaris System Administration Guide: Devices and File Systems, available at http://dlc.sun.com/pdf/817-5093/ 817-5093.pdf. MPX200 Multifunction Router User Guide 87 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 88
array This section explains how to configure a Solaris server to recognize an HP storage array in an iSCSI multipath environment with the MPX200. Editing the scsi_vhci.conf file HP storage arrays are supported with MPxIO: • As symmetric devices only 88 MPX200 iSCSI configuration rules and guidelines - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 89
to the /kernel/drv/ scsi_vhci.conf file: 1. Use a text editor to modify the configuration file. For example: # vi /kernel/drv/scsi_vhci.conf 2. Change load balancing to none: load-balance="none"; 3. Change auto-failback to disable: auto-failback="disable"; MPX200 Multifunction Router User Guide 89 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 90
conf file To ensure that the HP storage arrays are recognized by Solaris as SCSI controllers, you must add information to the /kernel/drv/sgen.conf file: 1. Use a text editor to modify the configuration file. For example: # vi /kernel/drv/sgen.conf 90 MPX200 iSCSI configuration rules and guidelines - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 91
="array_ctrl"; . . . # After configuring the device-type-config-list and/or driver alias The HP storage array is a self-identifying SCSI device and must be bound to the sgen driver using an alias. Execute the following procedure to create an sgen driver alias: MPX200 Multifunction Router User Guide - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 92
the targets available, enter the following command for each iSCSI port IP address that the iSCSI initiator accesses: #iscsiadm add discovery-address 'iscsi port IP address' 4. Verify the discovery address entries: #iscsiadm list discovery-address 92 MPX200 iSCSI configuration rules and guidelines - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 93
3720+Parameters. To modify the target parameter MaxRecvDataSegLen: 1. List all iSCSI targets: #iscsiadm list target-param 2. Change the value of MaxRecvDataSegLen to 65536 for each target: #iscsiadm modify target-param -p maxrecvdataseglen=65536 'target iqn' MPX200 Multifunction Router User Guide 93 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 94
Target: iqn.1986-03.com.hp:fcgw.mpx200.0834e00028.b1.01.50014380025c417d Alias: Bi-directional Authentication: disabled Authentication Type: NONE Login Parameters (Default/Configured): Data Sequence In Order: yes/Data PDU In Order: yes/Default Time To Retain: 20/Default Time To Wait: 2/Error - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 95
iqn.1986-03.com.hp:fcgw.mpx200.0834e00028.b2.01.50014380025c4179 Alias: TPGT: 0 ISID: 4000002a0000 Connections: 1 LUN: 120 Vendor: HP Product: HSV300 OS Device 2 Operational Path Count: 2 /dev/rdsk/c5t600508B4000B15A200005000038E0000d0s2 Total Path Count: 2 MPX200 Multifunction Router User Guide 95 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 96
/c5t600508B4000B15A200005000038E0000d0s2 mpath-support: libmpscsi_vhci.so Vendor: HP Product: HSV300 hp:fcgw.mpx200.0834e00028. b2.01.50014380025c4179 Relative ID: 0 Name: 4000002a0000,iqn.1986-03.com.hp:fcgw.mpx200.0834e00028. b1.01.50014380025c417d Relative ID: 0 Configuring Microsoft MPIO iSCSI - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 97
with a subset of paths. One set of paths is configured as active and another set of paths is configured as standby. I/O is sent in a round-robin fashion supported. Failover policies are set on a LUN-by-LUN basis. MPIO does not support global failover settings. MPX200 Multifunction Router User Guide - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 98
page of the Software Update Installation Wizard (Figure 69). Figure 69 Microsoft iSCSI Initiator Installation page . IMPORTANT: Do not select the Software Initiator check box. The QLogic initiator resides on the iSCSI HBA. 2. Reboot the system. 98 MPX200 iSCSI configuration rules and guidelines - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 99
Configuring the QLogic iSCSI HBA To configure the QLogic iSCSI HBA: 1. Launch the QLogic SMS from the desktop icon or through Start > Programs, and connect to the local host (Figure 70). MPX200 Multifunction Router User Guide 99 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 100
settings. • Configure the HBA Port DNS settings (optional). • Configure the SLP Target Discovery settings (optional). • Configure the iSNS Target Discovery settings (optional). Figure 70 Connect to Host window . Figure 71 Start general configuration wizard . 100 MPX200 iSCSI configuration rules and - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 101
add. 4. Click Next. 5. To activate the changes, enter the SMS password: config. 6. Select the Target Settings tab. Verify that the HBA state is Ready, Link Up and that each target entry state is Session Active (Figure 73). Figure 73 Target Settings tab . MPX200 Multifunction Router User Guide 101 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 102
74), verify that the QLogic iSCSI HBA is connected to the iSCSI LUNs in SMS under the HBA iSCSI port. Figure 74 iSCSI HBA port connections . Use the Microsoft iSCSI initiator services to manage the iSCSI target login and LUN load-balancing policies. Installing the HP MPIO Full Featured DSM for - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 103
iSCSI Failover clustering is supported on the HP StorageWorks MPX200 Multifunction Router. For more information, see http://www.microsoft.com/windowsserver2003/technologies/storage/iscsi/ iscsicluster.mspx. Requirements • Operating system: Windows Server 2003 Enterprise, SP2, R2, x86/x64 • Firmware - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 104
=18964&prodSeriesId=421492 Microsoft Cluster Server for Windows 2008 iSCSI Failover clustering is supported on the HP StorageWorks MPX200 Multifunction Router. For more information, see http://technet.microsoft.com/en-us/library/cc754482.aspx. 104 MPX200 iSCSI configuration rules and guidelines - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 105
x64 • Firmware: Minimum version-3.1.0.0, released November 2009 • Initiator: • Multiple NIC/iSCSI HBA ports-four recommended • one public • one private • two storage, for higher availability and performance • MPIO - use HP The CHAP restrictions are: MPX200 Multifunction Router User Guide 105 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 106
is unrestricted. CHAP is enforced on both discovery and normal sessions. MPX200 CHAP modes The MPX200 supports two CHAP modes. Once CHAP is enabled, it is enforced for both discovery sessions and normal sessions. You can choose only the CHAP mode: 106 MPX200 iSCSI configuration rules and guidelines - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 107
CHAP for the Microsoft iSCSI initiator: 1. Click Discovery. • To discover iSCSI target portals manually: a. Click Add under Target Portals. b. Enter the IP address of the MPX200 iSCSI port. c. Click Advanced. d. Select the CHAP Login Information check box. MPX200 Multifunction Router User Guide 107 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 108
CHAP secret (for example, CHAPsecret01): 1. Select the index of the iSCSI initiator. 2. Enable CHAP by selecting 0 and then entering the CHAP secret. Enabling CHAP for the Microsoft iSCSI initiator To enable CHAP for the Microsoft iSCSI initiator: 108 MPX200 iSCSI configuration rules and guidelines - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 109
the following lines: #discovery.sendtargets.auth.username = username #discovery.sendtargets.auth.password = password discovery.sendtargets.auth.username = iqn.1994-05.com.redhat:fc813cac13. sanergy33 discovery.sendtargets.auth.password = CHAPSecret01 MPX200 Multifunction Router User Guide 109 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 110
# To set a discovery session CHAP username and password for target(s) # authentication by the initiator, uncomment the following lines: #discovery.sendtargets.auth.username_in = username_in #discovery.sendtargets.auth.password_in = password_in 110 MPX200 iSCSI configuration rules and guidelines - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 111
0, and then entering the CHAP secret. 2. Enable CHAP for the MPX200 iSCSI presented target: a. Enter the set chap command. b. Select the Presented Target the initiator will log in to. c. Enable CHAP and enter a CHAP secret. For example: hpstorageworks MPX200 Multifunction Router User Guide 111 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 112
the General tab. b. Click Secret in the middle of the screen. c. Click Reset. d. Enter the MPX200 iSCSI Presented Target CHAP secret (for example: hpstorageworks). e. Click Discovery. • To discover iSCSI target portals manually: a. Click Add under Target Portals. b. Enter the IP address of the - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 113
. b. To enable CHAP for the MPX200 iSCSI port using the MPX200 CLI: • Enter the set chap command. • Select the appropriate Portal iqn name index that the initiator logs in to. • Select 0 to enable CHAP. • Enter a CHAP secret. For example: hpstorageworks. MPX200 Multifunction Router User Guide 113 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 114
General tab. b. Click Secret in the middle of the screen. c. Click Reset. d. Enter the MPX200 iSCSI Presented Target CHAP secret (for example: hpstorageworks). e. Click OK. f. Click Discovery. • To discover iSCSI target portals manually: a. Click Add under Target Portals. b. Enter the IP address of - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 115
. b. Enable CHAP for the MPX200 iSCSI port using the MPX200 CLI: • Enter the set chap command. • Select the appropriate Portal iqn name index that the initiator logs in to. • Select 0 to enable CHAP. • Enter a CHAP secret (for example: hpstorageworks). MPX200 Multifunction Router User Guide 115 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 116
General tab. b. Click Secret in the middle of the screen. c. Click Reset. d. Enter the MPX200 iSCSI Presented Target CHAP secret (for example: hpstorageworks). e. Click OK. f. Click Discovery. • For manually discovering iSCSI target portals: a. Click Add under Target Portals. b. Enter the IP address - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 117
license is required. A base configuration can be either a single HP StorageWorks MPX200 Multifunction Router 1-GbE Base Chassis (MPX200), Part Number AP771A, or an HP StorageWorks MPX200 Multifunction Router 10-1 GbE Base Chassis (MPX200), Part Number AP773A. Note that FCIP is currently supported - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 118
MPX200 Router 1-GbE Upgrade Blade, or an HP StorageWorks MPX200 Multifunction Router 10-1 GbE Base Chassis with an HP StorageWorks MPX200 Router 10-1 GbE Upgrade Blade. Note that FCIP is currently supported only on MPX200 1 GbE ports. See Figure 78. Figure 78 MPX200 high-availability configuration - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 119
that were zoned only with the FCIP FC port to the remaining iSCSI FC port of that blade. Once the targets are rezoned, the impact to iSCSI is the loss of one 1 GbE port. Figure 79 FCIP impact on existing iSCSI configurations - single fabric per blade . MPX200 Multifunction Router User Guide 119 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 120
for iSCSI alone, configuring FCIP on the same blade would limit FC access to only 8 Gb/s and would not meet the performance requirements for that situation. MPX200 iSCSI/FCIP configurations The MPX200 router supports the following configurations: • Figure 81 MPX200 basic FCIP configuration with - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 121
with IVR. This provides fabric isolation between the local and remote fabrics, allowing device access without merging the fabrics. This can be implemented in all supported MPX200 FCIP configurations using C-series Fibre Channel switches with IVR. MPX200 Multifunction Router User Guide 121 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 122
Figure 83 MPX200 FCIP with C-series IVR . Figure 84 MPX200 high-availability configuration with one or two long-distance links . Figure 85 MPX200 high-availability configuration with fully-redundant long-distance links . 122 MPX200 FCIP - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 123
Figure 86 MPX200 configuration with remote IP Distance gateway (mpx110) . Figure 87 MPX200 highly-redundant configuration with one or two long-distance lists . Figure 88 MPX200 highly redundant pairs of gateways with fully-redundant long-distance links . MPX200 Multifunction Router User Guide 123 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 124
Figure 89 MPX200 simultaneous iSCSI and FCIP with remote dedicated FCIP blade . Figure 90 MPX200 simultaneous iSCSI and FCIP, both local and remote . 124 MPX200 FCIP - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 125
Figure 91 MPX200 iSCSI and FCIP dedicated blades, both local and remote . HP Continuous Access EVA 3-site configurations This section describes the following HP Continuous Access EVA 3-site configurations: • HP Continuous Access EVA 3-site configuration with four MPX200 routers • HP Continuous - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 126
in Figure 92 provides long-distance link redundancy between all three sites. Figure 92 HP Continuous Access EVA 3-site configuration with four MPX200 routers . 3-site configuration with six MPX200 routers The configuration in Figure 93 provides the same long-distance link redundancy as the - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 127
Access EVA 3-site configuration with six MPX200 routers . 3-site configuration with eight MPX200 routers The configuration in Figure 94 provides the highest 3-site redundancy, with a dedicated MPX200 pair for all long-distance links to all three sites. MPX200 Multifunction Router User Guide 127 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 128
Figure 94 HP Continuous Access EVA 3-site configuration with eight MPX200 routers . 3-site configuration with six MPX200 routers and full inter-site connectivity Figure 95 provides long-distance link redundancy and full connectivity between all three sites. 128 MPX200 FCIP - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 129
for FCIP extension with HP Continuous Access EVA (see Storage system rules and guidelines, page 130) and XP Continuous Access. NOTE: For current support, see SPOCK at http://www.hp.com/storage/spock. You must sign up for an HP Passport to enable access. MPX200 Multifunction Router User Guide 129 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 130
multipath software supported by HP for Continuous Access EVA and XP Continuous Access. For more information, see the HP StorageWorks SAN Design Reference Guide, available at http://www.hp.com/go/ SDGManuals. Storage system rules and guidelines • The MPX200 Multifunction Router configured for FCIP - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 131
the performance predictability. IP performance tuning The MPX200 supports Fibre Channel service at transmission rates of 2 Gb/s, 4 Gb/s or 8 Gb/s with a maximum frame size of 2,148 bytes. It supports Ethernet service at transmission rates of 1,000 or MPX200 Multifunction Router User Guide 131 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 132
Mb/s is available for FCIP. If in this example the MPX200 is configured for two routes, based on the 30 Mb/s total bandwidth available for FCIP, you would set the MPX200 bandwidth parameter to 15, the available bandwidth for each FCIP route. HP StorageWorks Continuous Access EVA replication solution - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 133
set to auto, the MPX200 continually assesses data compressibility and automatically enables or disables compression based on data compressibility. The default setting for software compression is disable for new installations. If upgrading from an earlier version of firmware (prior to v3.2.0.1), the - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 134
increase the window size above 32 KB. Modify the window size and scaling factor in the MPX200 Multifunction Router pairs based on the WAN RTT and link speed. To determine the appropriate window size setting and time (RTT) in ms 250 Window size (bytes) 64K Scaling factor (2n) 1 134 MPX200 FCIP - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 135
32K 32K 32K Table 21 OC-1 50 Mb/Sec (Bandwidth = 50 Mb) Round trip time (RTT) in ms 250 100 50 25 20 15 10 Window size (bytes) 2M 512K 256K 128K 128K 128K 64K 0 0 0 0 0 0 0 0 0 Scaling factor (2n) 5 4 3 2 2 2 1 0 0 0 Scaling factor (2n) 6 4 3 2 2 2 1 MPX200 Multifunction Router User Guide 135 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 136
(Bandwidth = 148 Mb) Round trip time (RTT) in ms 250 100 50 25 20 15 10 5 2.5 1 or less Window size (bytes) 16M 4M 2M 1M 1M 1M 512K 256K 128K 64K Table trip time (RTT) in ms 250 Window size (bytes) 16M 136 MPX200 FCIP 0 0 0 Scaling factor (2n) 9 7 6 5 5 5 4 3 2 1 Scaling factor (2n) 7 6 5 4 4 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 137
Figure 77 on page 117): • HP StorageWorks MPX200 Multifunction Router 1-GbE Base Chassis or HP StorageWorks MPX200 Multifunction Router 10-1 GbE Base Chassis. Note that FCIP is currently supported only on MPX200 1 GbE ports. • HP Storage Works MPX200 Half Chassis FCIP License • Continuous Access EVA - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 138
MPX200 blade for re- dundancy) • HP StorageWorks MPX200 Multifunction Router 10-1 GbE Upgrade Blade. Note that FCIP is currently supported only on MPX200 1 GbE ports. Or • HP Storage Works MPX200 Full Chassis FCIP License NOTE: For the latest information about operating system and multipath software - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 139
chassis being configured. 6. Enter admin start at the mpx200 prompt, where n is the number of the blade currently selected in the chassis. 7. Enter the default password config. NOTE: HP recommends that you change the MPX200 config password after logging in. MPX200 Multifunction Router User Guide - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 140
session is terminated. To restart the Telnet session, use the IP address you just assigned to the management port. Step 6. Configure the MPX200 FCIP Route parameters Install FCIP license For each MPX200 blade, add the FCIP license as shown in Figure 97. Figure 97 FCIP License Add . 140 MPX200 FCIP - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 141
, page 131. NOTE: HP recommends that you accept the default settings for TCP Port and GE Port Speed. If you need to change the port speed, select Full Duplex mode; Half Duplex mode is not supported. Configure the FCIP routes using the CLI For each MPX200, configure the FCIP route information as - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 142
routing (XCS 09534000 or later). • For port-based routing, set the Continuous Access EVA data replication protocol to HP FC Data Replication Protocol. • For exchange-based routing, use HP SCSI FC Compliant Data Replication Protocol. Step 8. Cable the MPX200 FC, GE, and management ports To cable the - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 143
www.hp.com/storage/spock. You must sign up for an HP Passport to enable access. Upgrade accordingly. 2. Use the CLI ping command to verify FCIP link connectivity. 3. Verify that the FC switches have established an interswitch link (ISL) over the FCIP link. MPX200 Multifunction Router User Guide 143 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 144
144 MPX200 FCIP - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 145
Multifunction Router provides FCoE target functionality. Used with the HP StorageWorks arrays, the MPX200 enables FCoE connectivity over a 10-GbE link at no additional cost. FCoE features include: • 10-GbE model only • Support enabled with firmware version 3.2.2.0 (minimum) by default, no license - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 146
network iSCSI/IP FCoE switches FCoE/iSCSI MPX200 FCoE/iSCSI HP StorageWorks MPX200 MGMT IOIOI target 10GbE4 10GbE3 10 - 1 GbE Blade MPX200 Multifunction Router FC1 FC2 GE1 GE2 HP StorageWorks MPX200 MGMT IOIOI 10GbE4 10GbE3 10 - 1 GbE Blade MPX200 Multifunction Router FC1 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 147
to identify the FCoE ports on the MPX200: • In HP Command View EVA, see the FC Ports tab of the iSCSI Controller 0X in the Hardware folder (see Figure 100): Figure 100 HP Command View FCoE ports . • In the CLI, issue the show fc command (see Figure 101). MPX200 Multifunction Router User Guide 147 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 148
Figure 101 FCoE show fc command . 148 MPX200 FCoE feature description - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 149
create the FCoE host entry. b. Name the host. c. In the Type field, select the FCoE radio button. d. Select the WWNN that belongs to the host. e. Select the appropriate operating system. f. Click the Add host button (see Figure 102). Figure 102 Host type . MPX200 Multifunction Router User Guide 149 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 150
5. Create a virtual disk and assign it to the FCoE host. Note that the host has its own icon. Each host entry has only one WWPN associated with it, so any host with multiple port CNAs must have an entry for each (see Figure 103). Figure 103 Host properties . 150 MPX200 FCoE feature description - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 151
and how they map to the EVA ports. These FCoE WWNNs must be added to the FCoE zone created in Step 3 on page 147. NOTE: This step is not required for subsequent Vdisk/LUN assignments for the same or additional hosts. Figure 104 Host Details display . MPX200 Multifunction Router User Guide 151 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 152
152 MPX200 FCoE feature description - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 153
troubleshoot problems. Diagnostic information is also available through diagnostics, HP Command View EVA, and the CLI event logs and error messages. MPX200 chassis diagnostics Chassis diagnostics are indicated by the chassis LEDs (see Figure 105). NOTE: The USB port is unmarked and is not supported - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 154
next step. • If not, make the necessary repairs. If the problem persists, proceed to the next step. 3. Replace the MPX200 blade. System Fault LED is illuminated The System Fault LED is illuminated when a fault exists in the MPX200 firmware or hardware. If the System Fault LED is illuminated, check - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 155
Using the CLI or GUI, the IP address power down the MPX200. Contact your authorized maintenance provider. Locating the MPX200 blade A flashing blue LED indicates that the MPX200 blade beacon is ON. There are two ways to identify the location of an MPX200 blade: MPX200 Multifunction Router User Guide - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 156
OFF buttons to control the blue LED (Figure 111). Figure 111 Using HP Command View EVA to locate a hardware device . MPX200 log data The MPX200 maintains a log that can be displayed through the CLI. The log is persistent through reboots or power cycles. To view the log, use the CLI command show logs - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 157
ping command . Troubleshooting using HP Command View EVA You can use HP Command View EVA to display the properties for each iSCSI controller. At a glance, you can check the controller's serial number, temperature, and power/cooling status (Figure 113). MPX200 Multifunction Router User Guide 157 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 158
to set a static IP address on each MPX200 blade. Solution 3: Ensure that the HP Command View EVA station is on the same subnet as the management ports. Solution 4: Enter the known IP address of the management port of the iSCSI controller in the HP Command View EVA discovery screen. Initiator cannot - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 159
iSCSI host than was expected. EVA-presented virtual disk not seen by initiator Solution: The initiator must log in to the appropriate iSCSI target. Match the virtual disk presentation properties to the initiator's target login (Figure 115 and Figure 116). MPX200 Multifunction Router User Guide - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 160
properties: Host details . Figure 116 iSCSI initiator properties: Targets tab . Windows initiators may display Reconnecting if NIC MTU changes after connection has logged in Solution. Log out of the sessions and log in again to re-establish the Connected state. 160 Diagnostics and troubleshooting - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 161
are online. Check all MPX200 FC connections to the EVA. Cannot change iSCSI controller IP port attributes. Enable the iSCSI controller IP port. Command not supported with this version of the iSCSI controller. Check the firmware version and update if necessary. MPX200 Multifunction Router User - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 162
Ensure that the correct file is being used to restore the configuration. Operation failed. iSCSI controller code load file cannot The firmware file may be invalid or corrupt. Obtain open/read. another copy of the file. The iSCSI controller code load process has failed. The code load process may - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 163
: • HP StorageWorks MPX200 Multifunction Router EVA iSCSI Connectivity Quick Start Instructions for Microsoft Windows • HP StorageWorks MPX200 Multifunction Router Release Notes • HP StorageWorks Command View EVA User Guide • HP StorageWorks Interactive Help for HP Command View EVA • HP StorageWorks - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 164
www.hp.com/go/storage • HP Partner Locator: http://www.hp.com/service_locator • HP Software Downloads: http://www.hp.com/support/downloads • HP Software Depot: http://h20293.www2.hp.com • HP Single Point of Connectivity Knowledge (SPOCK) http://www.software.hp.com • HP StorageWorks SAN manuals: http - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 165
underlined text: http://www.hp.com Bold text Italic • Text entered into a GUI element, such as a box • GUI elements that are clicked or selected data. IMPORTANT: Provides clarifying information or specific instructions. NOTE: Provides additional information. MPX200 Multifunction Router User Guide - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 166
feet on the rack. • In multiple-rack installations, fasten racks together securely. • Extend only one rack component at a time. Racks can become unstable if more than one component is extended. Product warranties For information about HP StorageWorks product warranties, see the warranty information - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 167
italics within brackets: [value]. • In command prompts, or indicate which blade is being managed. Command line completion The command line completion feature makes entering and : • Commands for monitoring tasks are available to all accounts. MPX200 Multifunction Router User Guide 167 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 168
MPX200 CLI commands in alphabetical order. Admin Opens or closes an administrator (Admin) session. You must be in an Admin session to execute commands that change the router configuration , and reset commands also end an Admin session. cancel Terminates an Admin session opened by another user. Use - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 169
Admin session clear logs stats logs Clears all entries from the router's log file. stats Resets the statistics counters. Examples: The following examples show the clear commands: MPX200 (admin) #> clear logs MPX200 (admin) #> clear stats MPX200 Multifunction Router User Guide 169 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 170
any feature keys or licenses. Authority Syntax Keywords chassis: MPX200 #> exit (none) login: Example 2: At the blade management level, exit returns you to the chassis management level. The following example shows the exit command for the blade: MPX200 (admin) #> exit HP StorageWorks MPX200 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 171
key to do so. WARNING: The following command might cause a loss of connections to both GE ports. Configuring FCIP Route FCIP Interfaces FC & GE (0=Enable, 1=Disable) FC Port (1=FC1 ) GE Port (1=GE1 ) IP Address ( 'q' or 'Q' and the ENTER key to do so. MPX200 Multifunction Router User Guide 171 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 172
Port ID ---------GE1 GE2 Please select a FCIP route from the list above ('q' to quit): 1 Configuring FCIP Route FCIP Interfaces FC & GE (0=Enable, 1=Disable ] ] ] All attribute values for FCIP Route 1 will now be saved. MPX200 (admin) #> Example 3: MPX200 (admin) #> fciproute rm A list - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 173
their syntax. Authority Syntax None help Example 1: The help command differs for the chassis and the blade. The following example shows the help command for the chassis: MPX200 #> help admin [begin | end | start | stop | cancel] blade [1 | 2] exit help MPX200 Multifunction Router User Guide 173 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 174
history logout quit reset [factory | mappings] show [chassis] Example 2: The following example shows the help command for the blade: MPX200 #> help passwd ping quit reboot reset [factory | mappings] save [capture | logs | traces] set [alias | chap | chassis | fc | features | iscsi | isns | mgmt - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 175
in the [file] parameter, and then installs the firmware image on the router. Before using this command, you must use FTP to transfer the firmware image file to the router's /var/ftp directory. To activate the new firmware, you must reboot the router. MPX200 Multifunction Router User Guide 175 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 176
router's database. Authority Syntax Keywords Admin session add initiat- mod or remove add Adds an initiator to the router's that have been changed will now be saved. Example 2: MPX200 (admin) #> initiator mod Index (WWNN,WWPN/iSCSI Name 0 iqn.1991-05.com.microsoft:server1 Please select - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 177
add command: MPX200 (admin) #> lunmask add Index (WWNN/iSCSI Name 0 iqn.1991-05.com.microsoft:server1 Please select an Initiator from the list above ('q' to quit): 0 Index (WWNN,WWPN/iSCSI Name 0 20:00:00:20:37:fd:8b:ab,22:00:00:20:37:fd:8b:ab MPX200 Multifunction Router User Guide 177 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 178
('q' to quit): 1 All attribute values that have been changed will now be saved. Example 3: The following example shows the lunmask rm command: MPX200 (admin) #> lunmask rm Index (WWNN,WWPN/iSCSI Name 0 20:00:00:20:37:fd:8b:ab,22:00:00:20:37:fd:8b:ab 1 20:00:00:20:37 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 179
be saved. MPX200 (admin) #> Passwd Changes the guest and administrator passwords. Authority Syntax Admin session passwd Example: MPX200 (admin) MPX200 (admin) #> ping A list of attributes with formatting and current values will follow. Enter a MPX200 Multifunction Router User Guide - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 180
56 bytes of data: Request timed out : Packets: Sent = 10, Received = 9, Lost blade management level, quit returns you to the chassis management level. The following example shows the quit command for the blade: MPX200 (admin) #> quit HP StorageWorks MPX200 #> Reboot Restarts the blade firmware - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 181
. Authority Syntax Keywords Admin session save capture logs traces capture The save capture command creates a debug file that captures all debug dump data. When the command has finished executing, you must FTP the debug capture file from the blade. MPX200 Multifunction Router User Guide 181 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 182
FTP to extract the file out from the System. Configures general router parameters, as well as parameters for the FC, iSCSI, and management ports. Authority Admin session Syntax set Keywords alias chap alias chap chassis fc [] features iscsi [] isns mgmt ntp properties snmp - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 183
.com.hp:fcgw.mpx200.0834e00025.b1.01.50001fe150070ce9 1 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.02.50001fe150070ce9 2 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.03.50001fe150070ce9 3 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.04.50001fe150070ce9 MPX200 Multifunction Router User Guide - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 184
the ENTER key to do so. Index iSCSI Name 0 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.0 1 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.1 2 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.01.50001fe150070ce9 3 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.02.50001fe150070ce9 4 iqn.1986 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 185
the ENTER key to do so. Chassis Name (Max = 64 characters) [ ] rack 14 All attribute values that have been changed will now be saved. Set FC Configures an FC port. Authority Syntax Keywords values for Port 2 that have been changed will now be saved. MPX200 Multifunction Router User Guide 185 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 186
on the router before applying a new key. Authority Syntax Admin session set features Set iSCSI Configures an iSCSI port. Authority Syntax Keywords Admin session set isc- [] si [] The number of the iSCSI port to be configured. Example: MPX200 (admin) #> set iscsi 1 A list - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 187
Mgmt Configures the blade management port (10/100). Authority Syntax Admin session set mgmt Example 1: MPX200 (admin Interface (0=Enable, 1=Disable) [Enabled] IPv6 Mode (0=Manual, 1=AutoConfigure) [Manual ] 1 All attribute values that have been changed MPX200 Multifunction Router User Guide 187 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 188
be saved. Set properties Configures blade CLI properties. Authority Syntax Admin session set properties Example: MPX200 (admin) #> set Max=32 Characters) [HP StorageWorks MPX200 ] All attribute values that have been changed will now be saved. Set SNMP Configures general SNMP) properties - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 189
] Configuring SNMP Trap Destination 8 Destination enabled (0=Enable, 1=Disable) [Disabled ] All attribute values that have been changed will now be saved. Set system Configures the blade's system-wide parameters. Authority Syntax Admin session set system MPX200 Multifunction Router User Guide - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 190
Name (Max = 64 characters) [Blade-1 ] Embed Symbolic Name (0=Enable, 1=Disable) [Disabled ] Mode (0=iSCSI Server Connectivity), 1=SAN over WAN, 2=iSCSI Server Connectivity/SAN over WAN, 3=Data Migration) [iSCSI Connectivity] Target Presentation Mode (0=Auto, 1=Manual) [Auto ] Lun Mapping (0=Enable - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 191
licensed features. See "show features command" on page 195. Displays initiator information for iSCSI or FC. See "show initiators command" on page 195. Displays initiators and the LUNs to which they are mapped. See "show initiators LUN mask command" on page 196. MPX200 Multifunction Router User - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 192
"show memory command" on page 199. mgmt Displays the router's management port (10/100) configuration. See "show mgmt command" on page 200. Displays the router's NTP configuration. See "show ntp NTP command" on page 200. perf [ byte | init_rbyte | init_wbyte | tgt_rbyte | tgt_wbyte ] Displays - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 193
/CPU2) 48C/36C/37C/41C Power Cooling Module 1 Status Installed Power Source Connected Fan1/Fan2/Fan3 Healthy/Healthy/Healthy Blade 2 Information (Right Slot Status Online Product Name HP StorageWorks MPX200 Symbolic Name Blade-2 Serial Number 0836E00018 MPX200 Multifunction Router User Guide 193 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 194
38C Power Cooling Module 2 Status Installed Power 00-00-ef Firmware Revision No. 3. FCIP route or for all FCIP routes. Authority Syntax Keywords None show fciproutes [link_id] [link_id] Route number to display Example: MPX200 (admin) #> show fciproutes FCIP Route Information FCIP Route FCIP - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 195
VLAN FCIP SW Compression MPX200 iscsi iscsi Displays FC initiator information. Displays iSCSI initiator information. Example: MPX200 #> show initiators Initiator Information Initiator Name iqn.1991-05.com.microsoft:server1 Alias IP Address 0.0.0.0 MPX200 Multifunction Router User Guide - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 196
[port_num] [port_num] The number of the iSCSI port. Example: MPX200 (admin) #> show iscsi iSCSI Port Information iSCSI Port GE1 Port Status Enabled Link Status Up iSCSI Name iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.0 Firmware Revision 3.00.01.57 Current Port Speed 1Gb - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 197
log. For example, show logs 10 displays the last 10 entries in the router event log. The show logs command (without a number) displays the entire router event log. Example: MPX200 #> show logs 01/01/2008 00:00:13 System 3 Tuesday 01 January 12:13 AM MPX200 Multifunction Router User Guide 197 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 198
information for a specified LUN and target. Authority Syntax None show luninfo Example: MPX200 (admin) #> show luninfo 0 50:00:1f:e1:50:07:0c:e0,50 e0 LUN Number 0 VendorId HP ProductId HSV210 ProdRevLevel 5000 Portal 1 Lun Size 0 MB Lun State Online Show LUNs Displays LUN - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 199
all initiators mapped to the specified LUN. Authority Syntax None show lunmask Example: MPX200 #> show lunmask Index ----0 1 (WWNN,WWPN/iSCSI Name 50:00:1f:e1:50:07:0c:e0,50:00:1f:e1:50:07 /var/ftp/directory. Authority Syntax None show memory MPX200 Multifunction Router User Guide 199 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 200
256 Show mgmt Displays the blade management port (10/100) configuration. Authority Syntax None show mgmt Example: MPX200 (admin) #> show mgmt blade NTP configuration. Authority Syntax None show ntp Example: MPX200 #> show ntp NTP Information Mode Disabled 200 Command referencecommand - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 201
0 Example 3: MPX200 #> show perf init_rbyte WARNING: Valid data is only displayed for port(s) that are not associated with any configured FCIP routes. Displaying bytes/sec (initiator mode read)... (Press any key to stop display) GE1 GE2 GE3 GE4 FC1 FC2 MPX200 Multifunction Router User Guide 201 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 202
associated with any configured FCIP routes. Displaying bytes/sec (target mode write)... (Press any key to stop display) GE1 GE2 FC1 FC2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Show presented targets Displays the targets presented by the FC router, iSCSI router, or both. Authority - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 203
.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.04. MPX200 #> show properties CLI Properties Inactivity Timer 15 minutes Prompt String MPX200 Show SNMP Displays the router's SNMP configuration and any configured traps. Authority Syntax None show snmp MPX200 Multifunction Router User Guide - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 204
SNMP Configuration Read Community Public Trap Community Private System Location System Contact Authentication traps Disabled System OID 1.3.6.1.4.1.3873.1.5 System Description HP StorageWorks MPX200 Trap Destination 1 IP Address 10.0.0.5 Trap Port 1024 Trap Version 2 Show stats Displays the blade - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 205
Rcvd Broadcast Frames 91 iSCSI Shared Statistics PDUs Xmited 2729500577 Data Bytes Xmited 55036896842234 PDUs Rcvd 2655246170 Data Bytes Rcvd 0 I/O Completed 1815115669 Unexpected I/O Rcvd 0 iSCSI Format Errors 0 Header Digest Errors 0 Data Digest Errors 0 MPX200 Multifunction Router User Guide 205 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 206
blade product information, including the serial number, hardware and software versions, number of ports, and temperature. Authority Syntax None show system Example: MPX200 No. of iSCSI Ports Telnet SSH Temp (Front/Rear/CPU1/CPU2) HP StorageWorks MPX200 Blade-1 iSCSI Server Connectivity Enabled - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 207
for a specific VPG: MPX200 #> show vpgroups 2 VpGroup Information Index VpGroup Name Status WWPNs 2 VPGROUP_2 Enabled 21:01:00:c0:dd:13:16:44 21:01:00:c0:dd:13:16:45 Example 2: The following example shows the show vpgroups command for all VPGs: MPX200 Multifunction Router User Guide 207 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 208
session shutdown Example: MPX200 (admin) #> shutdown Are you sure you want to shutdown the System (y/n): n Command aborted. Target Removes an offline target from the blade database. Typically, you use this command to remove targets that are no longer connected to the router. Authority Syntax - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 209
2 10.7.9.5 1.1ms 1.1ms 1.1ms 3 172.21.130.233 2.7ms 2.7ms 2.6ms 4 172.21.4.245 291.4ms 291.4ms 291.4ms 5 172.21.4.246 413.6ms 417.1ms 439.2ms 6 10.35.9.1 459.1ms 465.6ms 480.0ms 7 172.35.14.17 495.3ms 483.0ms 505.9ms Traceroute completed in 7 hops. MPX200 Multifunction Router User Guide 209 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 210
210 Command referencecommand reference - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 211
Enter an account name and password. To log on to a switch through the serial port: 1. Configure the workstation port with the following settings: • 115,200 baud • 8-bit character • 1 stop bit • No parity 2. When prompted, enter an account name and password. MPX200 Multifunction Router User Guide 211 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 212
Password: password MPX200 #> show chassis Chassis Information Product Name HP StorageWorks MPX200 Chassis Name Router Chassis Name Serial Number 0834E00019 HW Version 20697-03 A Fan Speed Normal Blade 1 Information (Left Slot Status Online Product Name HP StorageWorks MPX200 Symbolic Name Blade - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 213
.102 Connected to 172.17.137.102. 220 (none) FTP server (GNU inetutils 1.4.2) ready. User (172.17.137.102:(none)): ftp 331 Guest login ok, type your name as password. Password: ftp 230 Guest login ok, access restrictions apply. ftp> bin 200 Type set to I. MPX200 Multifunction Router User Guide 213 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 214
put HP StorageWorks MPX200_FRU.bin 200 PORT command successful. 150 Opening BINARY mode data connection for 'HP StorageWorks MPX200_FRU.bin'. 226 Transfer complete. ftp: 6168 bytes sent in 0.00Seconds 6168000.00Kbytes/sec. ftp> quit 221 Goodbye. 2. Update a blade with the saved configuration data by - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 215
up to 64 characters, excluding the number sign (#), semicolon (;), and comma (,). The default is undefined. Authentication traps Enables or disables the generation of authentication traps in response to authentication failures. The default is disabled. MPX200 Multifunction Router User Guide 215 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 216
configured. Trap address Specifies the IP address to which the SNMP traps are sent. A maximum of eight trap addresses are supported. The default default is 162. If the trap destination is not enabled, this value is 0 (zero). Most SNMP managers and management software the iSCSI ports on the router. - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 217
iSCSI port. Unsigned32 Not accessible A positive integer indexing each network port in a given role. INTEGER 1 = Static 2 = DHCP 3 = Bootp 4 = RARP Read-only Method by which the port gets its IP address. InetAddressType Read-only IP address type: ipv4 or ipv6. MPX200 Multifunction Router User Guide - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 218
port. QsrLinkRate Read-only Operational link rate for this port. FC port table This table contains a list of the Fibre Channel (FC) ports on the router. There are as many entries in this table as there are FC ports on the - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 219
A list of the FC ports on the router. The table contains as many entries as there are FC ports on the router. qsrFcPortEntry Syntax Access Description QsrFcPortEntry Not accessible Each Read-only World Wide Name of the node that contains this port. MPX200 Multifunction Router User Guide 219 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 220
object table The initiator object table is a list of the iSCSI initiators that have been discovered by the router. There are as many entries in this table as there are iSCSI initiators on the router. qsrIsInitTable Syntax Access Description SEQUENCE OF QsrIsInitEntry Not accessible Entries in - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 221
Syntax Access Description SnmpAdminString Not accessible iSCSI name of the initiator. qsrIsInitAlias Syntax Access Description SnmpAdminString Read-only Alias for the iSCSI initiator. qsrIsInitAddressType Syntax Access InetAddressType Read-only MPX200 Multifunction Router User Guide 221 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 222
1 = unknown, 2 = loggedIn, 3 = loggedOut, 4 = recovery Read-only Status of the iSCSI initiator, that is, whether or not it is logged in to the router. SnmpAdminString Read-only The type of the iSCSI initiator's operating system. Integer: 0 = enabled; 2 = disabled Read-only A value indicating whether - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 223
Each entry (row) contains information about a specific LUN. This table extends scsiDscLunTable in QLOGIC-SCSI-MIB. The entries in this table show other attributes of the LUN. A Read-only Product ID for the LUN qsrLunProdRevLevel Syntax SnmpAdminString MPX200 Multifunction Router User Guide 223 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 224
Description Read-only Product revision level for the LUN Unsigned32 Read-only Size of the LUN (in megabytes) Integer 1 = online, 2 = offline, 3 = reserved Read-only State of the LUN (online or offline) Integer Read-only ID of the VP group to which this LUN belongs SnmpAdminString Read-only VP group - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 225
. qsrVPGroupName Syntax Access Description SnmpAdminString Read-only VP group name or host group name. qsrVPGroupWWNN Syntax Access Description VpGroupWwnnAndWwpn Read-only Worldwide port number (WWPN) MPX200 Multifunction Router User Guide 225 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 226
qsrVPGroupStatus Syntax Access Description Integer: 0 = enabled; 1 = disabled Read-only Maintain the status of the VP group (enabled/disabled) 226 Simple Network Management Protocol setup - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 227
qsrSensorType Syntax Access Description INTEGER Temperature = 1 Not accessible Type of data being measured by this sensor. qsrSensorIndex Syntax Access Description Unsigned32 Not accessible A positive integer identifying each sensor of a given type. MPX200 Multifunction Router User Guide 227 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 228
value is within normal operational limits. Warning = The sensor value is approaching a threshold. Critical = The sensor value has crossed a threshold. Notifications This section describes the MPX200 notification types. 228 Simple Network Management Protocol setup - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 229
(firmware) version number. qsrNoOfFcPorts Syntax Access Description Unsigned32 Read-only Quantity of FC ports on the system. qsrNoOfGbEPorts Syntax Access Description Unsigned32 Read-only Quantity of gigabit Ethernet ports on the system. qsrAgentVersion MPX200 Multifunction Router User Guide - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 230
Description SnmpAdminString Read-only Version number of the agent software on the system. Notification objects This section defines the notification The agent startup notification indicates that the agent on the router has started running. qsrAgentStartup uses the qsrEventTimeStamp object. Agent - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 231
the following events: • Management port: down or up • iSCSI port: down or up • Port number (1-4) FC port State: Discovered, went offline, or went online • Target WWPN • Blade number (1 or 2) Target presentation (mapping • qsrEventTimeStamp • qsrPresTgtMapped MPX200 Multifunction Router User Guide 231 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 232
Sensor notifications are sent for the following events: • Over Temperature • Blade number (1 or 2) • Sensor number (1 of 3) • Temperature returned to normal • Blade number (1 or 2) • Sensor number (1 of 3) • Fans at high speed • Power Cooling Module (PCM) number (1 or 2) • Fans returned to normal - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 233
• Blade number (1 or 2) • NTP configuration change • Blade number (1 or 2) • Router configuration change • Blade number (1 or 2) • Management port configuration change • Blade number (1 or 2) • Firmware upgrade complete • Blade number (1 or 2) • Reboot blade MPX200 Multifunction Router User Guide - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 234
• Blade number (1 or 2) 234 Simple Network Management Protocol setup - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 235
= Application module (iSCSI, FCIP, or DMS) • FC = FC driver • iSCSI = iSCSI driver • System = System module • TOE = TCP/IP offload engine module • User = User module (iSCSI, FCIP, or DMS) Error Processing unsupported head-ofqueue task management command. MPX200 Multifunction Router User Guide 235 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 236
or: 41265 QLIS_LoginPduContinue: Tar- get not configured for App Portal 41267 QLIS_LoginPduContinue: Tar- iSCSI target login was attempted to a portal (iSCSI1 or iSCSI2) on which the target is not presented. iSCSI login PDU received for a target with a target name unknown to the router. iSCSI - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 237
Error iSCSI login PDU received without an initiator name key/value. iSCSI login router as part of its discovery process. Pass-Through command for Inquiry command for page 83 failed. The Inquiry command was issued by the router as part of its discovery process. MPX200 Multifunction Router User Guide - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 238
%x App not configured 42002 QLFC_Login: data length. Pass-Through command issued by management application (such as GUI) was interrupted or timed out. IOCTL operation unsupported. Operation code provided in log message. Report LUNs command failed. The Report LUNs command was issued by the router - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 239
notification; an IOCTL request was received to unload the iSCSI driver. Event notification; attempt to connect to the iSNS server failed. Failed to allocate memory for TPB extension. Failed to allocate data segment descriptor (DSD) (buffer length %d). MPX200 Multifunction Router User Guide 239 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 240
Error Info Info Failed to allocate data buffer (length %d). Router is booting up. Decompression failed. Disabling compression temporarily. Info iSCSI session full feature login. Info iSCSI session discovery login. Info iSCSI login of Initiator: %s. Info iSCSI login of Target: %s. FC login - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 241
reboot timer failed. Fatal Port disable reboot timer failed. Fatal Fatal Fatal Fatal Port enable reboot timer failed. iSNS response contains an invalid handle. Start iSCSI processor failed. iSCSI processor firmware initialization failed. MPX200 Multifunction Router User Guide 241 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 242
before timeout. iSCSI processor system error restart. iSCSI processor reboot failed. iSCSI processor NVRAM invalid (checksum error). iSCSI controller Set Flash command failed. iSCSI controller failed to load firmware. iSCSI controller firmware load operation timed out. iSCSI controller failed to - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 243
x seconds. iSCSI processor failed to complete an abort request. Driver timed out an iSCSI processor operation and is aborting the operation. Driver timed out an iSCSI processor mailbox command. Driver timed out while attempting to reconnect with the iSNS. MPX200 Multifunction Router User Guide 243 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 244
rejected the firmware initialize command. Error Error Error Info Info Info Info Info Info Fatal Fatal Fatal Driver's initiator database is full. The driver is capable of storing 1024 iSCSI initiators in its database. Use the CLI or GUI to remove unwanted/unused iSCSI initiators. Driver's target - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 245
target path or has run out of resources to execute additional commands. FC processor was disabled by an IOCTL request to the driver. FC processor firmware failed initialization. The request to initialize was received by the driver in an IOCTL request. MPX200 Multifunction Router User Guide 245 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 246
data related to the event. FC controller reported an invalid Entry Status %x, type %x. FC controller failed to provide a heartbeat. Driver . This failure occurs only when the FC processor is running multi-ID firmware. Driver was unable to re-establish connection to the target within the timeout and - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 247
Error Info Info Info Info Info Info Info Driver was unable to re-establish connection to the controller failed a Flash write (address x data x). FC controller failed the Get VP status for a Get Firmware State command. Request to reset the FC processor ( MPX200 Multifunction Router User Guide 247 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 248
User ror 139268 QBRPC_Initialize:GetMgmt Mem User Allocation error 139269 QBRPC_Initialize:GetIscsi User Mem Allocation error 139270 QBRPC_Initialize:GetIscsiAdv User API memory allocation failed. Get iSCSI API memory allocation failed. Get iSCSI advanced API memory allocation failed. Get - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 249
is: d.d.d.d. User issued a REBOOT or SHUTDOWN command. FC port configuration has changed. Info iSCSI port configuration has changed. Info iSNS configuration has changed. Info NTP configuration has changed. Info VLAN configuration has changed. MPX200 Multifunction Router User Guide 249 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 250
was removed for LUN %d. qapisetmgmintfc151896 params_1_svc:Management port User Info Management port configuration has changed. configuration changed qapisetbridgebasi- 151897 cinfo_1_svc:Bridge configur- User Info Router configuration has changed. ation changed 151908 GE%d: Port status - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 251
memory error detected at address provided in log message. Attempt to register the interrupt handler failed. Failed class_simple_create system call from memory monitor initialization routine. MPX200 Multifunction Router User Guide 251 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 252
237573 Temperature over high threshold %d System 249862 Temperature is back to nor- System mal range %d Error Error Info Failed to kill system task. Router temperature has exceeded the high temperature threshold. Router temperature has returned to the normal operating range. 252 Log messages - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 253
al Target Online Info An array came online. 56347 Data LUNs are required for configuring migration jobs. Migration job being added for a LUN that is masked to an Info Initiator on the router. Mapped LUNs cannot be used for offline migration jobs. MPX200 Multifunction Router User Guide - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 254
- 56884 JobByLun: Could not find App migration object qapisetmigrfctargets_1_svc: 152096 Configuration Changed for User migration target 152099 LogMigration: Error in User Writting log file 152100 qapiaddgroup_1_svc: Added User Group with id %d 152101 qapiremovegroup_1_svc: Re - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 255
Start/Stop/Pause/Re- sume] has failed. Failed to remove a Migration Info Job with ID specified in the log. Reset the serial schedule Info delayed time to invalid if the last serial schedule job was removed. Info Failed to Create a Migration Job. MPX200 Multifunction Router User Guide 255 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 256
to an FCIP route. The route was not created. The router must be rebooted to clear this error. Invalid argument specified by user. The preceding encountered while reading, writing, or modifying FCIP route definition. Reboot the router. Network device configuration failed; could not add or remove a - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 257
that an FCIP was removed router will attempt to reconnect to the remote router. The FC link went down. Check the FC cabling and FC switch or drive statistics. The TCP link went down. Check the Ethernet cabling and Ethernet switch or peer device statistics. MPX200 Multifunction Router User Guide - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 258
FcipRoute#%d: VLAN Info Un- FCIP available 204835 QL3xxx:eth%x PHY Downshift TOE occurred 204837 QL3xxx:eth%x Link Down TOE 217124 QL3xxx:eth%x Link Up TOE Error Error Error Info Info Info Error Error Info A TCP client attempted to connect to the router, but the IP address did not match - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 259
E HP StorageWorks mpx100/mpx100b to MPX200 Upgrade The purpose of this appendix is to provide the steps required to replace an existing installation of the StorageWorks EVA iSCSI Connectivity Kit (mpx100/mpx100b) with the StorageWorks MPX200 Multifunction Router. This appendix assumes that the user - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 260
View EVA or SSSU. 15. Represent LUNs with the HP Command View EVA GUI or SSSU to MPX200 iSCSI Hosts. Example 2. ADD ISCSI_LUN VDISK=MPX200-D002 ISCSI_HOST="\Hosts\MPX200\BL6\BL6-02" 16. Boot Hosts. a. Linux: i. Restart iSCSI service. ii. Configure MPIO - multipath -v3 & multipath -ll to verify. iii - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 261
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to name or model number of the product. Laser device All HP systems equipped with a laser device comply with safety standards, light. MPX200 Multifunction Router User Guide 261 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 262
device enclosure. There are no user-serviceable components inside. • Do not Allow only HP authorized service technicians to Services (DHHS) regulation 21 CFR, Subchapter J. A label on the plastic FO transceiver housing be located on the surface of the HP supplied laser device. Figure 117 Class 1 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 263
Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. BSMI notice Japanese notice MPX200 Multifunction Router User Guide 263 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 264
or mistreated. Replacement is to be done by an HP authorized service provider using the HP spare part designated for this product. For more information about battery replacement or proper disposal, contact an HP authorized service provider. WARNING! Your switch contains an internal lithium manganese - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 265
plug, electrical outlet, and the point where the cords exit from the product. Japanese power cord statement Waste Electrical and Electronic Equipment directive English notice Disposal of waste equipment by users in private households in the European Union MPX200 Multifunction Router User Guide 265 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 266
For more information about where you can drop off your waste equipment for recycling, contact your local city office, your household waste disposal service, or the shop where you purchased the product. Dutch notice Verwijdering van afgedankte apparatuur door privé-gebruikers in de Europese Unie Dit - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 267
recyclage des appareils mis au rebut, veuillez contacter les autorités locales de votre région, les services de collecte des ordures ménagères ou le magasin dans lequel vous avez acheté ce produit Geschäft, in dem Sie das Gerät erworben haben. Greek notice MPX200 Multifunction Router User Guide 267 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 268
Hungarian notice Italian notice Smaltimento delle apparecchiature da parte di privati nel territorio dell'Unione Europea Questo simbolo presente sul prodotto o sulla sua confezione indica che il prodotto non può essere smaltito insieme ai rifiuti domestici. È responsabilità dell'utente smaltire le - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 269
e a saúde das pessoas. Para obter mais informações sobre locais que reciclam esse tipo de material, entre em contato com o escritório da HP em sua cidade, com o serviço de coleta de lixo ou com a loja em que o produto foi adquirido. Slovakian notice MPX200 Multifunction Router User Guide 269 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 270
Slovenian notice Spanish notice Eliminación de residuos de equipos eléctricos y electrónicos por parte de usuarios particulares en la Unión Europea Este símbolo en el producto o en su envase indica que no debe eliminarse junto con los desperdicios generales de la casa. Es responsabilidad del usuario - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 271
file out from the System. MPX200 (admin) #> NOTE: The FRU save creates a bin file containing the router persistent data, configuration, and LUN mappings. The file is stored in the router directory /var/ftp. You must then FTP the tar file from the router. MPX200 Multifunction Router User Guide 271 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 272
), which restores only the LUN mappings The restored configuration takes effect after the router is rebooted. To restore the configuration using MPX200 CLI: 1. Establish an FTP connection to the MPX200 management port and log in: Username: ftp Password: ftp 2. Enter the following command to set the - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 273
. Fibre Channel over Ethernet. An encapsulation of Fibre Channel frames over Ethernet networks. This allows Fibre Channel to use 10 Gigabit Ethernet networks while preserving the Fibre Channel protocol. For more information, visit www.fcoe.com. See FC. MPX200 Multifunction Router User Guide 273 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 274
Solutions Manager RSM Replication Solutions Manager. HP StorageWorks Replication Solutions Manager Software provides a powerfully simple graphical user interface (GUI) to create, manage and configure remote/local replication on the entire HP StorageWorks Enterprise Virtual Array (EVA) family - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 275
an initiator. Software that implements the based on the SCSI standard. zoning Configuring a set of Fibre Channel device ports to communicate across the fabric. Through switches, traffic within a zone can be physically isolated from traffic outside the zone. MPX200 Multifunction Router User Guide - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 276
276 Glossary - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 277
requirements, 167 B bandwidth, 273 battery replacement notice, 264 beacon command, 169 blade command, 169 C CHAP, 273 chassis diagnostics, 153 clear command, 169 CLI usage, 211 cluster support, Windows, 103 command reference, 167 command syntax, 167 MPX200 Multifunction Router User Guide 277 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 278
209 configuration blades, 24 dual-blade multi-EVA, 20 dual-blade fabric-attached, 19 maximums, 24 modifying, 213 single-blade fabric-attached, 18 single-blade multi-EVA, 19 configuration options, 18 configuring restoring, 214 saving and restoring, 213 Connected Targets tab, 78 D data migration, 273 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 279
for HP EVA storage array, 88 multipath devices, monitoring, 94 multipath routing, 274 multipathing, 66 N network port down notification, 230 network port table, 216 notices battery replacement, 264 Japanese power cord, 265 Taiwan battery recycling, 265 MPX200 Multifunction Router User Guide 279 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 280
adding targets to, 101 QLogic iSCSI HBA installing, 98 QLogic iSCSI initiator presenting LUNs to, 102 quit command, 180 R rack mounting, 27 rack stability, 166 reboot command, 180 Red Hat Linux installing and configuring, 78 related documentation, 163 reset command, 181 router blade, 15 RSM, 274 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 281
VP group table, 224 W websites HP Subscriber's choice for business, 164 product manuals, 163 Windows Server 2003 iSCSI initiator, 60 Windows Cluster support, 103 Windows Server 2003 Scalable Networking Pack, 69 WWNN, 275 WWPN, 275 WWULN, 275 Z zoning, 275 MPX200 Multifunction Router User Guide 281 - HP MPX200 | HP StorageWorks MPX200 Multifunction Router User Guide (5697-0568, A - Page 282
282
HP StorageWorks
MPX200 Multifunction Router User Guide
This user guide describes the MPX200 Multifunction Router, which supports the EVA and XP families of Fibre
Channel storage systems for integrated iSCSI connectivity, FCIP, FCoE (EVA only), and data migration. The
MPX200 hardware is integrated with up to four EVA or XP24000/20000 storage systems and HP Command
View EVA (EVA only) to deliver multi-protocol capabilities, including Fibre Channel, iSCSI, FCIP, and FCoE. This
document is intended for system administrators with knowledge of HP StorageWorks EVA4x00/6x00/8x00
and XP24000/20000 storage systems, configuring LUNs using HP Command View, HP Fibre Channel SANs,
Ethernet, TCP/IP networking, iSCSI, FCIP, FCoE.
Part Number: 5697-0568
Seventh edition: August 2010