HP MPX200 QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00
HP MPX200 Manual
View all HP MPX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP MPX200 manual content summary:
- HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 1
Data Migration Service for iSR6200 User's Guide ISR654608-00 C - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 2
online data migration to the description of Appendix A Configuring the Data Path Through iSR6200 for Online Data Migration. "Technical Support" on page xviii "What's in This Guide" on page xv Added bullets describing new features: Migration to thin-provisioned storage Online remote migration - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 3
Migration Service for iSR6200 User's Guide Added VPGs description and examples as a new "Virtual Port Groups (VPGs)" on page 3-7 data migration object type. Added presented targets description and example "Presented Targets" on page 3-9 as a new data migration object type. Added thin-provisioned - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 4
Data Migration Service for iSR6200 User's Guide Updated the procedure for using the data migration jobs wizard with new options. "Scheduling an Individual Data Migration for acknowledging offline and online (local and remote) data migration jobs. "Acknowledging a Data Migration Job" on page 5- - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 5
the firmware "Removing an Array After Completing Data Migra- to an earlier version. tion Jobs" on page 8-1 Added pre-migration setup details to the multipath configuration tables. Added support for VMware ESX 3.5 and ESXi 4.1. Appendix A Configuring the Data Path Through iSR6200 for Online Data - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 6
Data Migration Service for iSR6200 User's Guide vi ISR654608-00 C - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 7
Configurations Supported Topologies Direct Attach Configuration Fabric Configuration Data Migration Configuration Supported Fibre Channel Fabrics Supported Storage Arrays Hardware and Software Setup Hardware Setup Software Setup High Availability Considerations 2-1 2-1 2-1 2-2 2-3 2-10 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 8
Data Migration Service for iSR6200 User's Guide Migration Types Offline Data Migration Online Data Migration Job Scheduling Immediate Schedule Delayed Schedule Serial Schedule Configure Only Job States Virtual Port Groups (VPGs VPG Examples Using VPGs on a Fibre Channel Array - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 9
Migration Service for iSR6200 User's Guide 5 Performing Data Migration Typical Data Migration Process Configuring the Fabric Presenting LUNs to the iSR6200 LUN Presentation from Fibre Channel Arrays LUN Presentation from iSCSI Arrays Presenting LUNs to the Server for Online Data Migration - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 10
Data Migration Service for iSR6200 User's Guide 6 Command Line Interface User Accounts User Sessions Admin Session Miguser Session Commands array rm array_licensed_port rm compare_luns acknowledge compare_luns add compare_luns pause compare_luns resume compare_luns rm compare_luns - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 11
Data Migration Service for iSR6200 User's Guide Commands (continued) ]scrub_lun add 6-51 scrub_lun acknowledge 6-54 scrub_lun pause 6-55 scrub_lun resume 6-56 scrub_lun rm 6-57 scrub_lun rm_peer 6-58 scrub_lun start 6-59 scrub_lun stop 6- - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 12
an Array After Completing Data Migration Jobs 8-1 Configuring the Data Path Through iSR6200 for Online Data Migration Windows Multipath Configuration Linux Multipath Configuration IBM AIX Multipath Configuration HP-UX Multipath Configuration Solaris Multipath Configuration VMware Multipath - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 13
Data Migration Service for iSR6200 User's Guide List of Figures Figure Page 2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8 2-9 2-10 4-1 4-2 4-3 4-4 4-5 Single- and Dual-Blade Configuration Single- and Dual-Blade High Availability Setup Migration Between Dissimilar Vendor SANs Offline-Two Fibre Channel - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 14
Data Migration Service for iSR6200 User's Guide List of Tables Table Page 2-1 Migration Rates for Single and Dual Blade Configurations 2-2 2-2 Migration Rates for Single Blade Configuration 2-3 2-3 Supported Storage Arrays 2-11 3-1 Data Migration Job States 3-6 3-2 Example: Base WWPNs 3-7 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 15
types of migration licenses and provides instructions for license key installation. Chapter 5 Performing Data Migration provides information on the data migration service licensed features that you can view and configure using SANsurfer iSCSI/FC Router Manager, the graphical user interface (GUI - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 16
describes the wizard dialog boxes that walk you through various router configuration procedures. Configuring CHAP describes the challenge handshake authentication protocol (CHAP) and provides the procedures for configuring CHAP using SANsurfer Router Manager. Data Migration Service provides much - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 17
, refer to these related documents from QLogic: Data Migration Service for iSR6200 Planning Guide iSR6200 Quick Start Guide iSR6200 Router Manager User's Guide iSR6200 Command Line Interface (CLI) User's Guide Documentation Conventions This guide uses the following documentation conventions - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 18
of license agreements, refer to the QLogic Software End User License Agreement. A job group allows better management of data migration jobs. In the left pane, click iSR6200:. Screen captures that depict only the portion of the SANsurfer iSCSI/FC Router Manager user interface - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 19
with extended service, consult your plan for available hours. For Support phone numbers, see the Contact Support link at http://support.qlogic.com. Support Headquarters QLogic Corporation 4601 Dean Lakes Blvd. Shakopee, MN 55379 USA QLogic Web Site www.qlogic.com Technical Support Web Site - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 20
Preface Technical Support xx ISR654608-00 C - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 21
Fibre Channel, iSCSI, and Fibre Channel over Ethernet (FCoE). The iSR6200 allows data migration between storage arrays of the same or different protocols. Migration to thin-provisioned storage: The iSR6200 supports migration to "thin-provisioned" storage. During the data migration process, the - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 22
the intuitive graphical user interface (GUI) that provides many wizard-based operations, and the command line interface (CLI). Both provide user-level protection and ease of use. Any SAN administrator or storage administrator can perform safe and quick data migration. Data security and sanity - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 23
to capture the configuration details, system logs, and iSR6200 state at any time, and can be used for troubleshooting if the need arises. Licensing: DMS licenses provide capacity-based (per TB) and array-based licenses. For more information, see 4 Data Migration Licenses. ISR654608-00 C 1-3 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 24
1-Introduction 1-4 ISR654608-00 C - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 25
helps you get started using data migration service with the iSR6200 and SANsurfer iSCSI/FC Router Manager by providing information in the following sections: Supported Configurations "Hardware and Software Setup" on page 2-12 Supported Configurations This section describes and illustrates - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 26
2-Getting Started Supported Configurations Table 2-1 shows the migration rates that can be achieved for single and dual blades, depending on the bandwidth capability of the storage array. Table 2-1. Migration Rates for Single and Dual Blade Configurations Array Type Single Blade Dual Blade 2Gb - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 27
Vendor SANs Data Migration Configuration Figures in this section show the typical configurations used for offline and online data migration using iSR6200 models. Chapter 5 Performing Data Migration and Appendix A Configuring the Data Path Through iSR6200 for Online Data Migration also refer - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 28
2-Getting Started Supported Configurations HBA SA SB blade number, Fibre Channel port number, and virtual port group number Presented target from iSR6200 representing source array controller port number and the VPGroup number used to present the LUNs to the iSR6200 (online data migration - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 29
2-Getting Started Supported Configurations Figure 2-5 illustrates both online and offline data migration between two Fibre Channel storage arrays. Figure 2-5. Online and Offline-Two Fibre Channel Arrays ISR654608-00 C 2-5 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 30
2-Getting Started Supported Configurations Figure 2-6 illustrates both online and offline data migration between two Fibre Channel storage arrays using iSR6260 models with four Fibre Channel ports per blade (eight total Fibre Channel ports). Figure 2-6. Online and Offline-Source Array and - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 31
2-Getting Started Supported Configurations Figure 2-7 illustrates both online and offline data migration between two Fibre Channel arrays using iSR6260 models when the Fibre Channel fabric is also upgraded. Figure 2-7. Online and Offline-Two Fibre Channel Arrays (iSR6260; Fabric Upgrade) ISR654608 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 32
2-Getting Started Supported Configurations Figure 2-8 shows the offline data migration between a Fibre Channel storage array and an iSCSI storage array. Figure 2-8. Offline-Fibre Channel and iSCSI Arrays 2-8 ISR654608-00 C - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 33
2-Getting Started Supported Configurations Figure 2-9 illustrates remote migration using WAN links between two data centers. Figure 2-9. Remote Migration Using FCIP over WAN Links ISR654608-00 C 2-9 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 34
2-Getting Started Supported Configurations Figure 2-10 illustrates remote migration for iSCSI. Figure 2-10. Remote Migration for iSCSI Supported Fibre Channel Fabrics DMS is currently supported with Brocade/McDATA, Cisco, and QLogic 2Gb, 4Gb, and 8Gb Fibre Channel fabrics. 2-10 ISR654608-00 C - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 35
Universal Storage Platform (USP) family HP StorageWorks Modular Storage Array (MSA) family HP StorageWorks Enterprise Virtual Array (EVA) family HP StorageWorks XP Disk Arrays family HP StorageWorks P4000 G2 SAN Solutions (iSCSI) HP 3PAR F-Class series HP 3PAR T-Class series System Storage DS3000 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 36
to the iSR6200. Multipathing: For online data migration, ensure that the latest multipathing software is installed on the host server, and that both router blades are using the same firmware version. High Availability Considerations For HA configurations where multiple Fibre Channel ports (from - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 37
2-Getting Started Hardware and Software Setup For the iSR6200 to work correctly, you must set up all WWPNs from the same VPG (across both blades) as a single host entity, and you must also project unique LUNs to this host entity in the storage array. Set up multiple VPGs as different - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 38
2-Getting Started Hardware and Software Setup 2-14 ISR654608-00 C - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 39
)" on page 3-7 "Presented Targets" on page 3-9 "Migration to a Thin-Provisioned LUN" on page 3-9 "Data Management LUN (DML)" on page 3-10 "Online Remote Migration" on page 3-11 "Data Scrubbing" on page 3-14 "Protection" on page 3-15 "Logs" on page 3-15 "Users" on page 3-16 Arrays DMS - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 40
arrays such as the EMC-DMX, HP-XP, or IBM DS8000. Configure the array entity created by the . During the creation of migration jobs, the Data Migration wizard restricts the assignment of in data migration. The iSR6200 simultaneously supports both iSCSI connectivity and data migration service. - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 41
can be part of a single data migration job. Job groups: For better manageability, you can configure data migration jobs to belong to a specific, user-defined job group. By default, a job is assigned to a default group, Group 0. For details, see "Data Migration Job Groups" on page 3-3. ISR654608 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 42
regularly-provisioned LUN to a thin-provisioned LUN. If a destination LUN supports thin provisioning, you can opt to configure this migration Job as thin provisioned. For details, see "Migration to a Thin-Provisioned LUN" on page 3-9. The data migration wizard enables you to configure multiple jobs - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 43
the next 30 days) Serial Schedule (priority-based scheduling) Configure Only (manually start later) Immediate Schedule Use the Immediate Schedule option to schedule a data migration job to instantly start data migration. For offline data migration, ensure that both the source and destination - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 44
be started only with explicit user intervention. One of the important uses of the Configure Only option is to verify all configured migration jobs at your desk. When a migration job is configured, a detailed entry is created in the migration log. After configuring all migration jobs, you can export - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 45
job was added with the Configure Only option. A job goes into this state when a data migration copy is completed and the router is synchronizing the DRL blocks with the destination. Virtual Port Groups (VPGs) Virtual port groups (VPGs) are designed to support concurrent migrations of both a large - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 46
3-Data Migration Objects Virtual Port Groups (VPGs) Table 3-3. Example: Four WWPNs (the second host entity in the storage array). For details on configuring VPGs on a Fibre Channel array, see the iSR6200 Intelligent Storage Router Installation Guide, "Configuration" chapter. 3-8 ISR654608-00 C - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 47
(SB1 + VPG1) are presented through Blade 2. Migration to a Thin-Provisioned LUN The iSR6200 provides the option to create a data migration job to a thin-provisioned LUN. You can migrate data either online or offline. The iSR6200 detects thin-provisioned storage based on SCSI Read capacity commands - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 48
a newly created destination LUN for data migration. For remote online and offline data migration, QLogic does not recommend thin-provisioning and validation. Data Management LUN (DML) The iSR6200 uses a data management LUN (DML) to support remote migration (asynchronous replication). The DML: Is - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 49
Management LUN" on page 5-33 and Chapter 6 Command Line Interfaces. Online Remote Migration Because the iSR6200 uses the asynchronous replication method to migrate data online to a remote location, the router requires a DML (see Data Management LUN (DML)). The iSR6200 uses the DML to record all the - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 50
window size Configure 1MB window size on the iSR6200 and iSCSI target port. The iSR6200 supports a maximum TCP window size of 4MB. An iSCSI target array port may support larger TCP window sizes. If migrating to a thin-provisioned storage, always allocate destination LUN fresh. QLogic does not - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 51
dedicated IP bandwidth between the two sites is available for data migration throughout the migration project. Migrate simultaneously all applications and servers associated with the destination storage. Schedule the start of online remote migration at off peak hours, such that the change rate - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 52
previous section. Scheduling: Same as data migration job scheduling. Scrubbing CurrentPass: Specifies the currently active pass for a scrubbing job. Data Scrubbing Protections Data scrubbing protections include the following: The scrubbing job configuration wizard only shows LUNs that are part - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 53
Migration Objects Protection Data Scrubbing Licenses Data scrubbing license keys are based on an iSR6200 blade serial number. The licenses are shared between two blades in the same iSR6200 chassis. The two types of data scrubbing licenses include: Capacity-based licenses Array-based licenses - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 54
troubleshooting. The iSR6200 supports two types of users: Administrative user ("admin"): For managing the iSR6200, you must be in an administrative session. The default password for the administrator is config. Data migration user ("miguser"): This user session is required to configure migration - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 55
on page 4-2 "Installing a Data Migration License Key" on page 4-2 "Applying an Array-based License to a Specific Array" on page 4-4 "Viewing Data Migration and Scrubbing License Usage" on page 4-6 Types of Data Migration Licenses Data migration license keys are based on an iSR6200 blade serial - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 56
of array capacity. An array-based license is consumed when it is allocated to a specific array. Installing a Data Migration License Key Follow this procedure to install a data migration license key using SANsurfer iSCSI/FC Router Manager. To install a data migration license key: 1. In the SANsurfer - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 57
4-Data Migration Licenses Installing a Data Migration License Key 3. In the right pane, click the Features tab. 4. On the Features page under License Information, click Add, as shown in Figure 4-1. Figure 4-1. Features Page: License Information The New License Key dialog box opens, as shown in - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 58
based licenses and installed the licenses in the iSR6200, follow these steps to license a specific array for data migration. For every array that is licensed, one license is consumed. To apply an array-based license to a specific array in the GUI: 1. In the left pane of the SANsurfer iSCSI/FC Router - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 59
4-Data Migration Licenses Applying an Array-based License to a Specific Array Figure 4-4. License Array Dialog Box The Information page for the selected array now shows the Array License as Licensed, as shown in Figure 4-5. ISR654608-00 C 4-5 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 60
of data migration and scrubbing licenses in the GUI; to view the licenses in the CLI, see "show migration_usage" on page 6-97. You can view license usage for either the chassis or a blade. To view data migration license usage for the chassis: 1. In the left pane of the SANsurfer iSCSI/FC Router - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 61
Info for the Chassis To view data migration license usage for the blade: 1. In the left pane of the SANsurfer iSCSI/FC Router Manager main window, click the Services tab. 2. In the left pane, under Router iSR6xxx, select a blade node. License usage appears on the Data Migration Info page, as shown - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 62
4-Data Migration Licenses Viewing Data Migration and Scrubbing License Usage Figure 4-7. Data Migration Info for a Blade 4-8 ISR654608-00 C - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 63
5-4 "Presenting LUNs to the Server for Online Data Migration" on page 5-7 "Mapping Initiators to LUNs" on page 5-11 "Setting Array Properties" on page 5-12 "Creating a Data Migration Job Group" on page 5-14 "Using the Data Migration Wizard" on page 5-15 "Starting Serial Scheduled Jobs - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 64
. For remote migration, also create a data management LUN. "Presenting LUNs to the Server for Online Data Migration" on page 5-7 9. Define user groups. "Creating a Data Migration Job Group" on page 5-14 10. Configure and validate data migration jobs. "Using the Data Migration Wizard" on page - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 65
33 18. Check license usage. "Viewing Data Migration and Scrubbing License Usage" on page 4-6 Configuring the Fabric Because iSR6200 online data migration presents multiple virtual Fibre Channel ports to each physical Fibre Channel port, enable N_Port ID virtualization (NPIV) support on the Fibre - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 66
Channel ports as determined by the configuration of various Fibre Channel switch ports, where: The Connect and Connect (loop mode) settings are appropriate for online data migration. The Connect (offline migration only) setting is appropriate for offline data migration. The No connect setting - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 67
Storage Router Installation Guide, "Configuration" chapter. b. In the array management utility, set the VPG host type to Windows. c. Present the LUNs (associated with the server) to the router as the same LUN ID (if possible) as presented to the server. If multiple servers are being migrated at - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 68
in the iSR6200 blades. To present up to 1,024 LUNs (4×256) from the same array to the iSR6200, repeat the preceding steps for each VPG. For details on LUN presentation to the iSR6200 through different vendor arrays, refer to the Data Migration Service for iSR6200 Planning Guide. LUN Presentation - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 69
Online Data Migration After successful iSCSI login, the iSCSI target comes online. NOTE: If the iSCSI storage array supports it, you can establish multiple connections per session using multiple GbE ports on the same router blade Presented Targets" on page 3-9". QLogic recommends that you create the - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 70
To present source array LUNs to the initiator for online data migration: 1. Use either the SANsurfer iSCSI/FC Router Manager or the CLI to create a presented target: In SANsurfer iSCSI/FC Router Manager, use the Target Presentation/LUN Mapping Wizard to automatically detect the portal on which the - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 71
Presenting LUNs to the Server for Online Data Migration To create presented targets: 1. Configure the hosts as follows: Host 1: a. Present VPG1 and VPG2 to see all four source array target ports through both blades. 2. Create the following presented targets when presenting the LUNs to Host 1 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 72
Presenting LUNs to the Server for Online Data Migration NOTE: For information about online insertion of the iSR6200 in the data path in a cluster configuration, see the QLogic applications note, iSR6200 Data Migration for Cluster Configurations. You can use either one of the methods in this - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 73
. 3. Remove Zone1 and Zone2. Direct paths are removed. Mapping Initiators to LUNs SANsurfer iSCSI/FC Router Manager provides the Target Presentation/LUN Mapping Wizard to map Fibre Channel initiators to LUNs for online data migration. This mapping provides the access for the LUN to the host from the - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 74
to enter the admin password. 5. Type the admin password, and then click Next. 6. On the LUN Masking Configuration Status window, review the results of the target ports presented for the selected initiators, and then click Finish. Setting Array Properties SANsurfer iSCSI/FC Router Manager enables you - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 75
5-Performing Data Migration Setting Array Properties Figure 5-1. Information Page: Setting Array Properties 3. (Optional) In the Symbolic Name box, type a user-friendly array name. 4. From the Target Type list, select Source. NOTE: Array bandwidth is only displayed and editable if the array target - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 76
WWULN, or Serial Number. 9. To save your changes, click Save. 10. If the Data Migration Security Check dialog box opens, enter the administrative password. (The default password is migration.) SANsurfer iSCSI/FC Router Manager displays an informative message indicating that the array properties have - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 77
Wizards menu, click Configure Migration Jobs. In the left pane, open the Services page, right-click the Data Migration Jobs node, and then click Configure Migration Jobs. 3. If the Data Migration Security Check dialog box appears, type the data migration user password (default is migration), and - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 78
5-Performing Data Migration Using the Data Migration Wizard 3. Expand the nodes in the right pane of the Create Data Migration Job dialog box to see the type of array (Source, Destination, or Src+Dest) for each of the arrays available for configuring the data migration job. Figure 5-2 shows an - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 79
) exists. If a DML has not been previously configured, the online remote migration job configuration fails. NOTE: If the source LUN is mapped to an initiator, Online (Local) data migration is selected by default. Otherwise, the migration type defaults to Offline (Local/Remote). ISR654608-00 C 5-17 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 80
box, type a user-defined name to describe this data migration job. d. In the Group Name box, select a job group name from the list. The group name makes it easier to view the job status on a group basis. e. In the TP Settings box, select one of the following options for a thin-provisioned LUN: No - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 81
Data Migration Using the Data Migration Wizard g. For offline migration jobs only, select the Verify Data After Migration Finished check box to validate migrated data by reading it from the source LUN and comparing it to the destination LUN. (This option is not available for online migration - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 82
, select one of the default I/O sizes. e. Under Migration Type, select one of the following: Click Online to schedule a data migration job in which disconnecting server access to the LUN is not required, or a remote online job. You must, however, ensure that the router is inserted correctly in the - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 83
data migration job you created was configured as a Serial Schedule Jobs scheduling type on the Data Migration Jobs Options dialog box, the job is listed on the Active Data Migration the Serial Data Migration Jobs Options dialog box (see Figure 5-4) using one of these options: On the Wizards menu, - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 84
right pane of the SANsurfer iSCSI/FC Router Manager displays the job status for all active and completed data migration jobs that you have configured. To view the status of data migration jobs: 1. In the left pane, click the Services tab. 2. In the left pane, expand a blade node, and then click the - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 85
Job Details and Controlling Job Actions To view data migration job details: 1. In the left pane, click the Services tab. 2. In the left pane, expand a blade node, and then click the Data Migration Jobs node. 3. In the left pane, under the Data Migration Jobs node, expand a Group x node, and then - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 86
5-Performing Data Migration Viewing Job Details and Controlling Job Actions Figure 5-5. Data Migration Job Page: Job In Progress 5-24 ISR654608-00 C - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 87
-click a specific job, and then click the appropriate action on the shortcut menu. Viewing System and Data Migration Job Logs SANsurfer iSCSI/FC Router Manager provides two types of logs: system and data migration job. This section describes how to open and view each log type. System Log To view the - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 88
5-Performing Data Migration Viewing System and Data Migration Job Logs The Router Log Router Log (System Log) dialog box to perform the following actions: Click OK to close the log window after you have finished viewing it. Click Clear to delete the contents of the log. Click Export to download - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 89
box, click Data Migration Logs. The Router Log (Migration Log) dialog box opens and lists the following columns of information, as shown in Figure 5-8: SeqID is the sequential ID of log entries. Time Stamp is the log entry time, based on router system time. Group Name is the user-defined job - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 90
of the log. Click Export to download the logs in CSV file format that can be viewed in any spreadsheet application, such as Microsoft Excel. Using the Verify Migration Job Wizard The configure verifying jobs wizard helps you configure verification jobs to compare data residing on two LUNs. This - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 91
Start SANsurfer iSCSI/FC Router Manager and connect to the iSR6200. 2. Start the configure verifying jobs wizard using one of these methods: On the Wizards menu, click Configure Verifying Jobs. In the left pane, open the Services page, right-click on either the Blade or Data Migration Jobs node - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 92
Box 5. The contents of the Verifying Jobs Options dialog box are identical to the Data Migration Jobs Options dialog box. For an explanation of the selections on this dialog box, see "Using the Data Migration Wizard" on page 5-15. 6. To save the verifying jobs options, click Apply. Or, to abandon - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 93
left. To acknowledge a completed online, local data migration job: 1. In the left pane of SANsurfer iSCSI/FC Router Manager, click the Services tab, and in the left pane under a blade node, click Data Migration Jobs. 2. In the right pane, click the Completed Data Migration Jobs tab to bring that - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 94
Jobs Group page. Figure 5-10. Synchronizing Jobs Group Page To acknowledge a completed online, remote data migration job: 1. In the left pane of SANsurfer iSCSI/FC Router Manager, click the Services tab, and in the left pane under a blade node, click Data Migration Jobs. 2. In the right - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 95
(DML)" on page 3-10. To create a data management LUN in SANsurfer Router Manager: 1. Start the Create Data Management LUN Wizard using one of these methods: On the Wizards menu, click Create Data Management LUN, and then in the Select Blade dialog box, choose Blade 1 or Blade 2. In the system - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 96
online on one of the blades. If the LUN does not meet all of the preceding criteria, the wizard rejects the LUN and the DML creation operation fails with the appropriate error message. 3. (Optional) To view the attributes of a DML, select a DML node under Data Management LUNs in the SANsurfer Router - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 97
. Or, right-click in the system tree pane, and then click Remove Management LUN to remove a DML from the default blade, Blade 1. 2. Complete the Remove Data Management LUN Wizard as follows: a. Select one or more DMLs by selecting the check box to the left of each. b. Click OK to save your changes - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 98
Data Migration Using the Scrubbing LUN Wizard Using the Scrubbing LUN Wizard The scrubbing LUN wizard helps you configure scrubbing jobs to wipe out data and migration jobs. For scrubbing jobs, you can additional specify one of several scrubbing algorithms. The current firmware release provides - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 99
5-Performing Data Migration Using the Scrubbing LUN Wizard ZeroClean: Two passes DOD_5220_22_M: Four passes DOD_5220_22_M_E: Four passes DOD_5220_22_M_ECE: Eight passes Figure 5-14 shows an example of the scrubbing job options. Figure 5-14. Scrubbing - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 100
5-Performing Data Migration Generating a Data Migration Report Figure 5-15. Scrubbing Job Page Generating a Data Migration Report SANsurfer iSCSI/FC Router Manager provides reporting of data migration jobs that have either been acknowledged or removed from the system. Each migration job entry in - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 101
to NETAPP LUN-0:VPG1:006 Group Id = 0 Group Name = Group 0 Job Type = Migration Migration Type = Online (Remote) Priority = 0 IOsize = 64 Operation = ACKNOWLEDGED Blade Serial No = 0906E00039 Chassi Serial No = 0834E00029 Start Time = Wed Jan 12 10:37:28 2011 End Time = Wed Jan 12 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 102
Performing Data Migration Generating a Data Migration Migration Migration Type = Online (Remote) Priority = 0 IOsize = 64 Operation = REMOVED Blade Serial No = 0906E00039 Chassi Serial No = 0834E00029 Start Time = Wed Jan 12 10:37:29 2011 End Time = Wed Jan 12 10:40:01 2011 Migration - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 103
T10 WWULN = NETAPP LUN C4i/aJaJ1e8K To save data migration job information for the blade to a report: 1. In the left pane, click the Services tab. 2. Select the blade on which the report is to be generated. The Data Migration Info page for the selected blade appears in the right pane, as shown in - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 104
5-Performing Data Migration Generating a Data Migration Report Figure 5-16. Data Migration Info for a Blade 3. Select the Data Migration Report check box. 4. Determine whether you want to upload the report to a server or save report to a local router. 5. To upload the report (currently in JSON - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 105
Data Migration Generating a Data Migration Report If the report is saved successfully, the Saved Report message box indicates that you can retrieve from the iSR6200 blade the report file Migration_Report.tar.gz using FTP. c. Use FTP to access the router using the user name ftp and password - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 106
5-Performing Data Migration Generating a Data Migration Report 5-44 ISR654608-00 C - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 107
(CLI) User's Guide. User Accounts User accounts include the guest account. The guest account is the default user account used to log into the iSR6200 Telnet session. The guest session has a view-only type of access. The default password for this account is password. User Sessions User sessions - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 108
run CLI commands related to the migration operations. The default password for starting the miguser session is migration. You can start and stop NOTE: You must select a blade before issuing any migration user command, or admin command until you access a blade. Commands This section provides the - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 109
Commands Table 6-1. CLI Commands (Continued) Command Type Commands Compare LUNs commands Data Management LUN (DML) commands Initiator commands iSCSI Port commands LUN commands Miscellaneous commands Migration Group commands "compare_luns acknowledge" on page 6-8 "compare_luns add" on page - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 110
Interface Commands Table 6-1. CLI Commands (Continued) Command Type Commands Migration Job commands Set commands Scrubbing commands "migration acknowledge" on page 6-26 "migration add" on page 6-27 "migration pause" on page 6-37 "migration resume" on page 6-38 "migration_report" on page 6-39 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 111
6-75 "show initiators" on page 6-76 "show initiators_lunmask" on page 6-77 "show iscsi" on page 6-78i "show logs" on page 6-79 "show luninfo" on page 83 "show memory" on page 6-85 "show mgmt" on page 6-87 "show migration" on page 6-88 "show migration_logs" on page 6-90 "show migration_luninfo" on - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 112
6-Command Line Interface array rm array rm Removes from persistence the details associated with an offline array, and removes the license information associated with the array. Authority miguser Examples The following example shows the array rm command: iSR6200 (miguser) #> array rm A list - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 113
the ports (shown by the show migration_usage command) for which you have removed an array without also removing the array's license. Authority miguser Examples The following example shows the array_licensed_port rm command: iSR6200 (miguser) #> array_licensed_port rm 01. Symbolic name = DGC - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 114
example shows the compare_luns acknowledge command: iSR6200 (miguser) #> compare_luns acknowledge Job Type ID --- ---0 Offline Status Job Description Completed HP HSV200-0:0001 to DGC RAID-1:0000 Please select a Job Id from the list above ('q' to quit): 0 All attribute values for - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 115
2 3 4 (VpGroup Name VPGROUP_1 VPGROUP_2 VPGROUP_3 VPGROUP_4 Please select a VPGroup for Source Lun ('q' to quit): 1 LUN Vendor LUN Size( GB) Attributes 1 HP 10.00 SRC LUN 2 HP 10.00 3 HP 20.00 4 HP 20.00 5 HP 10.00 6 HP 5.00 7 HP 5.00 8 HP 5.00 ISR654608-00 C 6-9 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 116
10.00 SRC LUN 2 HP 10.00 3 HP 20.00 4 HP 20.00 5 HP 10.00 6 HP 5.00 7 HP 5.00 8 HP 5.00 Please select a LUN as a Destination Lun('q' to quit): 2 I/O Size (0=32KB, 1=64KB, 2=128KB, 3=512KB, 4=1MB) [64KB ] Please Enter a Job Description (Max = 64 characters) default name [ HP - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 117
6-Command Line Interface compare_luns add Start Time (1=Now, 2=Delayed, 3=JobSerialScheduling, 4=ConfigureOnly) [Now ] Successfully created Job All attribute values for that have been changed will now be saved. ISR654608-00 C 6-11 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 118
following example shows the compare_luns pause command: iSR6200 (miguser) #> compare_luns pause Job Type ID --- ---0 Offline Status Job Description Verify Running HP HSV200-0:0001 to DGC RAID-1:0000 Please select a Job Id from the list above ('q' to quit): 0 All attribute values for - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 119
following example shows the compare_luns resume command: iSR6200 (miguser) #> compare_luns resume Job Type ID --- ---0 Offline Status Job Description Verify Paused HP HSV200-0:0001 to DGC RAID-1:0000 Please select a Job Id from the list above ('q' to quit): 0 All attribute values for - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 120
The following example shows the compare_luns rm command: iSR6200 (miguser) #> compare_luns rm Job Type ID --- ---0 Offline Status Verify Running Job Description HP HSV200-0:0001 to DGC RAID-1:0000 Please select a Job Id from the list above ('q' to quit): 0 Do you wish to continue with - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 121
when the owner blade is not up. Authority miguser Examples The following example shows the compare_luns rm_peer command: iSR6200 (miguser) #> compare_luns rm_peer Job Type Status Job Description ID --- ---- 0 Offline.. Verify Running HP HSV200-0:VPG1:002 to HP HSV210-... Please - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 122
The following example shows the compare_luns start command: iSR6200 (miguser) #> compare_luns start Job Type ID --- ---0 Offline Status Job Description Stopped HP HSV200-0:0001 to DGC RAID-1:0000 Please select a Job Id from the list above ('q' to quit): 0 Start Time for JobId 0:(1=Now - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 123
technical or business needs. Use this command also on already-configured scheduled jobs to change the scheduling time. Authority miguser Examples stop Job Type ID --- ---0 Offline Status Verify Running Job Description HP HSV200-0:0001 to DGC RAID-1:0000 Please select a Job Id from - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 124
must have a minimum size of 50GB. Authority miguser Examples The following example shows the dml create command: iSR6200 (miguser) #> dml create Data Management Lun type (1 = Remote Migration) [ 1 ] Index ----0 1 WWPN, PortId/ iScsiName, Ip Add 20:24:00:a0:b8:2a:3f:78, 01-02-00 50:06:01:62 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 125
6-Command Line Interface dml delete dml delete Lists all configured DMLs. The first DML is considered to be the "master" (miguser) #> dml delete Index ----0 1 SymbolicName -----------Data Mgmt Lun 0::1 Data Mgmt Lun 0::2 Please select a Data Mgmt Lun from the List above ('q' to quit): 1 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 126
Line Interface show dml show dml Lists all configured DMLs and shows DML-specific attributes such as LUN type (master, for example), LUN serial number, LUN state, data extents, and more. The first output line identifies the master blade. Authority miguser Examples The following example shows the - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 127
admin) #> initiator mod Index ----0 1 2 Type ----FC FC FC (WWNN,WWPN/iSCSI Name 50:06:01:60:cb:a0:35:de,50:06:01:69:4b:a0:35 (0=Windows, 1=Linux, 2=Solaris, 3=OpenVMS, 4=VMWare, 5=Mac OS X, 6=Windows2008, 7=HP-UX, 8=AIX, 9=Other) [Windows ] 0 All attribute values that have been changed - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 128
6-Command Line Interface iscsi discover iscsi discover Discovers the iSCSI target through the router's iSCSI port. Authority admin Examples The following example shows the iscsi discover command: iSR6200 (admin) #> iscsi discover A list of attributes with formatting and current values will - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 129
Command Line Interface iscsi login iscsi login Logs in the user to a specific discovered iSCSI target and lists all other targets discovered from the iscsi discover command. Authority admin Examples The following example shows the iscsi login command: iSR6200 (admin) #> iscsi login A list of - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 130
: iSR6200 (admin) #> lunmask add Index ----0 Type ---FC Mapped -----Yes (WWNN,WWPN/iSCSI Name 20:00:00:1b:32:0a:61:80,21:00:00:1b:32:0a:61:80 Please Initiator from the list above ('q' to quit): 0 Index ----0 1 2 3 4 (WWNN,WWPN/iSCSI Name 50:0a:09:80:85:95:82:2c,50:0a:09:81:85:95:82:2c 20 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 131
attribute values that have been changed will now be saved. The following example shows the lunmask rm command: iSR6200 (admin) #> lunmask rm Index ----0 1 2 3 4 (WWNN,WWPN/iSCSI Name 50:0a:09:80:85:95:82:2c,50:0a:09:81:85:95:82:2c 20:00:00:14:c3:3d:cf:88 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 132
Completed (100%) HP HSV200-0:LUN1 to DGC RAID-1:LUN0 Please select a Job Id from the list above ('q' to quit): 0 All attribute values for that have been changed will now be saved. The following example shows the migration acknowledge command for an online data migration job: iSR6200 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 133
) a specific job in the serial schedule queue of data migration jobs. Authority miguser Examples The following example shows the migration add command used to configure an offline data migration job: iSR6200 (miguser) #> migration add A list of attributes with formatting and current values - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 134
:02:d0:00:00:5f:00:00 7 HP 10.00 PB5A8C3AATK8BW 60:05:08:b4:00:10:6b:ac:00:02:d0:00:00:62:00:00 8 HP 10.00 PB5A8C3AATK8BW 60:05:08:b4:00:10:6b:ac:00:02:d0:00:00:65:00:00 9 HP 100.00 DATA MGMT PB5A8C3AATK8BW 60:05:08:b4:00 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 135
a thin provisioned LUN [y/n]: y Do you wish to validate data on destination LUN [y/n]: y I/O Size (0=32KB, 1=64KB, 2=128KB, 3=512KB, 4=1MB) [64KB ] Please Enter a Job Description (Max = 64 characters) default name [ HP HSV200-0:VPG1:002 to NETAPP LUN-3:VPG1:001 ] Verify Data after Migration job - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 136
following example shows the migration add command used for configuring an online data migration job: iSR6200 (miguser) #> migration add A list of Lun ('q' to quit): 1 LUN Vendor LUN Size( GB) Attributes 1 HP 10.00 Serial Number/WWULN PB5A8C3AATK8BW 60:05:08:b4:00:07:59:a4:00:02:d0: - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 137
migration add 60:05:08:b4:00:10:6b:ac:00:02:f0:00:00:b6:00:00 4 HP 10.00 PB5A8C3AATK8BW 60:05:08:b4:00:10:6b:ac:00:02:d0:00:00:59:00:00 5 HP 10.00 PB5A8C3AATK8BW 60:05:08:b4:00:10:6b:ac:00:02:d0:00:00:5c:00:00 6 HP 10 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 138
Lun('q' to quit): 1 Is destination LUN a thin provisioned LUN [y/n]: y Do you wish to validate data on destination LUN [y/n]: y I/O Size (0=32KB, 1=64KB, 2=128KB, 3=512KB, 4=1MB) [64KB ] Please Enter a Job Description (Max = 64 characters) default name [ HP HSV200-0:VPG1:001 to NETAPP LUN - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 139
list press 'q' or 'Q' and the ENTER key to do so. Migration Type [ 1=Offline (Local/Remote), 2=Online (Local), 3=Online (Remote) ] [ ] 3 Index ----0 1 2 3 4 WWPN to quit): 1 LUN Vendor LUN Size( GB) Attributes 1 HP 10.00 Serial Number/WWULN PB5A8C3AATK8BW 60:05:08:b4:00:07:59:a4:00 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 140
6-Command Line Interface migration add 60:05:08:b4:00:10:6b:ac:00:02:d0:00:00:5f:00:00 7 HP 10.00 PB5A8C3AATK8BW 60:05:08:b4:00:10:6b:ac:00:02:d0:00:00:62:00:00 8 HP 10.00 PB5A8C3AATK8BW 60:05:08:b4:00:10:6b:ac:00:02:d0:00:00:65 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 141
6-Command Line Interface migration add Is destination LUN a thin provisioned LUN [y/n]: y Do you wish to validate data on destination LUN [y/n]: y I/O Size (0=32KB, 1=64KB, 2=128KB, 3=512KB, 4=1MB) [64KB ] Please Enter a Job Description (Max = 64 characters) default name [ HP HSV200-0:VPG1:001 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 142
and want to continue with the job scheduling. 10. Specify whether the destination LUN is a thin-provisioned LUN, and if "yes", then specify whether to validate the data on that LUN. 11. At the prompts, specify the I/O size, job name, migration group, and scheduling type. a. Enter an I/O size between - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 143
was paused. Authority miguser Examples The following example shows the migration pause command: iSR6200 (miguser) #> migration pause Job Type ID --- ---0 Offline Status Job Description Running ( 67%) HP HSV200-0:LUN1 to DGC RAID-1:LUN0 Please select a Job Id from the list above - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 144
resumed from the block where the data migration was paused. Authority miguser Examples The following example shows the migration resume command: iSR6200 (miguser) #> migration resume Job Type ID --- ---0 Offline Status Job Description Paused ( 80%) HP HSV200-0:LUN1 to DGC RAID-1:LUN0 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 145
Keywords save Saves data migration report files. upload Uploads the data migration report files to a server. Notes Examples To generate a data migration report: 1. On the iSR6200, issue the migration_report save command. The generated report is saved in the /var/ftp folder of the blade where the - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 146
Line Interface migration rm migration rm Deletes a data migration job. Authority miguser Examples The following example shows the migration rm command: iSR6200 (miguser) #> migration rm Job Type ID --- ---0 Offline Status Running ( 5%) Job Description DGC RAID-2:VPG4:001 to HP HSV210 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 147
All attribute values for that have been changed will now be saved. The following example shows the migration rm_peer command when the peer blade is up and running: iSR6200 (miguser) #> migration rm_peer Peer router is up. Cannot remove migration job(s) from peer router. ISR654608-00 C 6-41 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 148
starts over from the first block. Authority miguser Examples The following example shows the migration start command: iSR6200 (miguser) #> migration start Job Type Status Job Description ID 0 Offline Stopped HP HSV200-0:LUN1 to DGC RAID-1:LUN0 Please select a Job Id from the list - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 149
Interface migration stop migration stop Stops running the data migration job. Use this command if you want to later restart the migration process ID -----7 8 LUN Size(MB 10000 10000 Src Symbolic Name HP MSA-1 HP MSA-1 Please select a Migration Job Id from the list above ('q' to quit): 1 All - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 150
session using the following command: miguser start -p migration (The default password for miguser is migration.) 3. Create a migration group using the following command: migration_group add 4. At the prompt, enter a name for the new group. The data migration group name must be a minimum of 4 and - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 151
job group. Use this command to correct spelling mistakes that might have occurred when you typed the name while creating the data migration job group. Authority miguser Examples The following example shows the migration_group edit command: iSR6200 (miguser) #> migration_group edit Index Group - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 152
need to be scheduled. You may need to delete groups because there is limit of eight groups into which the iSR6200 can classify data migration jobs. Authority miguser Examples The following example shows the migration_group rm command: iSR6200 (miguser) #> migration_group rm Index Group Name - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 153
sequentially. This operation is allowed only if the high priority jobs are completed, and there is room for shifting the priority values on already configured jobs. This readjustment reduces the priority value of the last job from 256 by the value of the priority of the currently running serial job - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 154
admin Examples The following shows an example of the rescan devices command. iSR6200 (admin) #> rescan devices Index ----0 1 2 3 State ----Online Online Online Online (Symbolic Name, WWPN/WWNN,WWPN/iSCSI Name, Ip Address HP HSV200-0, 50:00:1f:e1:50:0a:e1:49 DGC RAID-2, 50:06:01:62:41:e0:49 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 155
passwords. This command also restores the factory default IP addresses. The reset mappings command clears all information for everything except the MGMT IP address. Authority admin Syntax reset factory | mappings Keywords factory Deletes router configuration and resets them to factory defaults - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 156
6-Command Line Interface save capture save capture Captures the system log that you can use to detect and troubleshoot problems when the iSR6200 is exhibiting erroneous behavior. This command generates a System_Capture.tar.gz file that provides a detailed analysis. Authority admin Examples The - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 157
Interface scrub_lun add scrub_lun add Creates a data scrubbing job to "scrub" (wipe out data from) the LUN using four scrubbing VPGroup for Lun ('q' to quit): 1 LUN Vendor LUN Size( GB) Attributes 1 HP 10.00 MAPPED Serial Number/WWULN PB5A8C3AATK8BW 60:05:08:b4:00:07:59:a4:00:02:d0 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 158
:02:d0:00:00:5f:00:00 7 HP 10.00 PB5A8C3AATK8BW 60:05:08:b4:00:10:6b:ac:00:02:d0:00:00:62:00:00 8 HP 10.00 PB5A8C3AATK8BW 60:05:08:b4:00:10:6b:ac:00:02:d0:00:00:65:00:00 9 HP 100.00 DATA MGMT PB5A8C3AATK8BW 60:05:08:b4:00 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 159
6-Command Line Interface scrub_lun add Start Time (1=Now, 2=Delayed, 3=JobSerialScheduling, 4=ConfigureOnly) [Now ] Successfully created Job All attribute values for that have been changed will now be saved. ISR654608-00 C 6-53 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 160
following example shows the scrub_lun acknowledge command: iSR6200 (miguser) #> scrub_lun acknowledge Job Type Status Job Description ID --- ---- 0 Scrubbi.. Completed HP HSV200-0:VPG1:004 Please select a Job Id from the list above ('q' to quit): 0 All attribute values for that have - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 161
6-Command Line Interface scrub_lun pause scrub_lun pause Pauses the running scrub job. Authority miguser Examples The following example shows the scrub_lun pause command: iSR6200 (miguser) #> scrub_lun pause Job Type Status Job Description ID --- ---- 0 Scrubbi.. Running (Pass: 1 13 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 162
6-Command Line Interface scrub_lun resume scrub_lun resume Resumes the paused scrub job. Authority miguser Examples The following example shows the scrub_lun resume command: iSR6200 (miguser) #> scrub_lun resume Job Type Status Job Description ID --- ---- 0 Scrubbi.. Paused (Pass: 1 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 163
6-Command Line Interface scrub_lun rm scrub_lun rm Removes the scrub job. Authority miguser Examples The following example shows the scrub_lun rm command: iSR6200 (miguser) #> scrub_lun rm Job Type Status Job Description ID --- ---- 0 Scrubbi.. Running (Pass: 1 23%) NETAPP LUN-3:VPG1 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 164
6-Command Line Interface scrub_lun rm_peer scrub_lun rm_peer Removes the scrub job from the peer blade when the owner blade is not up. Authority miguser Examples The following example shows the scrub_lun rm_peer command: iSR6200 (miguser) #> scrub_lun rm_peer Job Type Status Job Description - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 165
6-Command Line Interface scrub_lun start scrub_lun start Starts a stopped scrub job. Authority miguser Examples The following example shows the scrub_lun start command: iSR6200 (miguser) #> scrub_lun start Job Type Status Job Description ID --- ---- 0 Scrubbi.. Stopped NETAPP LUN-3: - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 166
6-Command Line Interface scrub_lun stop scrub_lun stop Stops the running scrub job. Authority miguser Examples The following example shows the scrub_lun stop command: iSR6200 (miguser) #> scrub_lun stop Job Type Status Job Description ID --- ---- 0 Scrubbi.. Running (Pass: 1 1%) - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 167
50:0a:09:82:88:8c:a7:79, 61-12-00 Symbolic Name HP HSV200-0 HP HSV210-2 DGC RAID-2 EQLOGIC 100E-00-7 EQLOGIC 100E-00-8 NETAPP LUN-3 Target ] Do you want to apply Local Migration Array license (yes/no) [No ] Do you want to apply Data Scrubbing Array License (yes/no) [No ] LunInfo Display - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 168
Name (Max = 128 characters) [HP MSA2012fc-0] Target Type (1=SrcTarget, 2=DstTarget, 3=Src+Dest 4=None Target) [3 ] Bandwidth for Migration (0=Array Bandwidth, 50-1600 MBps ) [0 ] Enable Load Balancing (0=Enable, 1=Disable) [Enabled ] Array based licensed applied. All attribute values for - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 169
based licenses and installed the licenses in the iSR6200, follow these steps to license a specific array for data migration. For every array that is licensed, one license is consumed. To apply an array-based license 0f-ef Symbolic Name HP HSV200-0 HP HSV210-1 DGC RAID-2 HP MSA2012fc-3 Target Type - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 170
6-Command Line Interface set event_notification set event_notification Sets the system notification on or off, and specifies the URL to notify. Authority admin Examples The following example shows the set event notification command: iSR6200 (admin) #> set event_notification A list of - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 171
list press 'q' or 'Q' and the ENTER key to do so. WARNING: The following command might cause a loss of connections to both ports. Configuring FC Port: 1 Port Status (0=Enable, 1=Disable) Link Rate (0=Auto, 1=1Gb, 2=2Gb, 4=4Gb, 8=8GB) Frame Size (0=512B, 1=1024B, 2=2048B) Execution Throttle (Min - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 172
6-Command Line Interface set features set features Saves and activates the array's data migration license key. Authority admin Examples The following example shows the set features command: iSR6200 (admin) #> set features A list of attributes with formatting and current values will - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 173
Data Migration from the default mode of iSCSI Server Connectivity. All of the data migration CLI and GUI features are activated only in the Data Migration System Symbolic Name (Max = 64 characters) [Blade-2 ] Target Presentation Mode (0=Auto, 1=Manual) [Auto ] Lun Mapping (0=Enable, 1=Disable - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 174
of the set vpgroups command. iSR6200 (admin) #> set vpgroups The following wizard will query for attributes before persisting and activating the updated mapping in the system configuration. If you wish to terminate this wizard before reaching the end of the list press 'q' or 'Q' and the ENTER - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 175
Product ID Target Type WWPN Port ID State Array Bandwidth Load Balancing Array License DGC RAID-1 Online DGC RAID 0 Src+Dest 50:06:01:69:41:e0:18:94 01-2d-00 Online Available Bandwidth Enabled Not Applied Symbolic Name State Vendor ID Product ID HP HSV210-2 Online HP HSV210 ISR654608-00 C 6-69 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 176
Bandwidth Enabled Not Applied Symbolic Name State Vendor ID Product ID Target Type WWPN Port ID State Array Bandwidth Load Balancing Array License HP MSA2012fc-3 Online HP MSA2012fc Src+Dest 20:70:00:c0:ff:d5:9a:05 01-0f-ef Online Available Bandwidth Enabled Not Applied 6-70 ISR654608-00 C - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 177
either all verify jobs or only jobs with a specific state. It also lists the configuration details of the selected job. Authority guest Examples The following shows an example of the 60:06:01:60:96:02:1a:00:84:f3:f5:81:89:9e:de:11 10.00 GB MSA-2012 1:0 60:0c:0f:f0:00:d5:9c:a4:31:d4:a9:4a:01:00:00:00 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 178
Mode Link Status Current Link Rate Programmed Link Rate WWNN WWPN Port ID WWNN WWPN Port ID WWNN WWPN Port ID WWNN WWPN Port ID Firmware Revision No. Frame Size Execution Throttle Connection Mode SFP Type FC1 Enabled FCP Up 8Gb Auto 20:00:00:c0:dd:13:2c:60 (VPGROUP_1 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 179
WWNN WWPN Port ID WWNN WWPN Port ID WWNN WWPN Port ID WWNN WWPN Port ID Firmware Revision No. Frame Size Execution Throttle Connection Mode SFP Type 6-Command Line Interface show fc 20:00:00:c0:dd:13:2c:61 (VPGROUP_1) 21: - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 180
Lists available features and shows the current license status of each. Authority guest Examples The following example shows the show features command: iSR6200 #> show features Feature Information FCIP 1Gig Licensed DM Capacity Licensed DM Array Licensed 6-74 ISR654608-00 C - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 181
Wed Jan 14 01:13:25 2010 Key CAPACITY 10TB) Chassis Licensed Date Applied 400000-LCAKL3EKNFMVA-B53E8025-FCIP-1G (DATA-MIGRATION 0851E00034 Wed Jan 14 01:14:21 2010 Key Chassis Licensed Date Applied 4000000-LCJLNJPGOIQVC-B53E7FA8-FCIP-1G (FCIP-1Gig) 0851E00034 Wed Jan 14 01:16:23 2010 Key - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 182
6-Command Line Interface show initiators show initiators Displays detailed information for all initiators. Authority Examples guest The following example shows the show initiators command. iSR6200 #> show initiators Initiator Information WWNN 50:06:01:60:cb:a0:35:de WWPN 50:06:01:69: - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 183
LUNs for each initiator. Authority Examples guest The following example shows the show initiators_lunmask command. iSR6200 #> show initiators_lunmask Index ----0 1 2 Type ----FC FC FC (WWNN,WWPN/iSCSI Name 50:06:01:60:cb:a0:35:de,50:06:01:69:4b:a0:35:de 20:01:00:e0:8b:a8:86:02 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 184
No. IPv4 VLAN IPv6 Address 1 IPv6 Address 2 IPv6 Link Local IPv6 Default Router IPv6 Target TCP Port No. IPv6 VLAN iSCSI Max First Burst iSCSI Max Burst iSCSI Header Digests iSCSI Data Digests GE1 Enabled iSCSI Up iqn.2004-08.com.qlogic:isr6200.0834e00029.b1 3.00.01.57 Unknown Auto Normal 65536 00 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 185
shows the show logs command used to display ten log records: iSR6200 #> show logs 10 10/09/2009 11:11:04 BridgeApp 10/09/2009 11:15:29 QLFC rscnInfo:0x2080000 VpIndex:0x0 10/09/2009 11:15:29 QLFC rscnInfo:0x2080000 VpIndex:0x1 10/09/2009 11:15:29 QLFC rscnInfo:0x2080000 VpIndex:0x2 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 186
unique LUN names (WWULNs) are present: iSR6200 #> show luninfo Index ----0 1 2 3 4 5 6 7 (WWNN,WWPN/iSCSI Name 50:00:1f:e1:50:0a:e1:40,50:00:1f:e1:50:0a:e1:49 50:00:1f:e1:50:0a:e1: :e0:49:2e 50:00:1f:e1:50:0a:37:10,50:00:1f:e1:50:0a:37:18 50:00:1f:e1:50:0a:37:10,50:00:1f:e1:50:0a:37:1c 50:0a: - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 187
Lun Size Lun State P3TPeJZ4dMV6 1 NETAPP LUN 7310 0 12288 MB Online Lun WWULN Information EUI Based WWULN NAA Based WWULN 4a:5a:34:64:4d:56:36:00:0a:98:00 are not present: iSR6200 #> show luninfo Index ----0 1 2 3 4 (WWNN,WWPN/iSCSI Name 50:0a:09:80:85:95:82:2c,50:0a:09:81:85:95:82:2c - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 188
VPGROUP_1 4 7/VPGROUP_1 5 8/VPGROUP_1 6 9/VPGROUP_1 7 10/VPGROUP_1 8 11/VPGROUP_1 Please select a LUN from the VendorId DGC ProductId RAID 5 ProdRevLevel 0223 Portal 0 Lun Size 6144 MB Lun State Online LUN Path Information Controller Id 2 WWPN,PortId / IQN,IP 50:06:01:68 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 189
20:78:00:c0:ff:d5:9a:05 VPGROUP_1 0 VPGROUP_1 1 VPGROUP_1 2 VPGROUP_1 3 VPGROUP_1 4 VPGROUP_1 5 VPGROUP_1 6 VPGROUP_1 7 VPGROUP_1 8 VPGROUP_1 9 VPGROUP_1 10 VPGROUP_1 11 VPGROUP_1 12 VPGROUP_1 13 VPGROUP_1 14 21:78:00:c0:ff:d5:9a:05 VPGROUP_1 0 VPGROUP_1 1 VPGROUP_1 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 190
6-Command Line Interface show luns 50:06:01:60:4b:a0:35:de VPGROUP_4 0 VPGROUP_4 1 VPGROUP_4 2 VPGROUP_4 3 VPGROUP_4 4 50:00:1f:e1:50:0a:e1:49 VPGROUP_1 0 VPGROUP_1 1 VPGROUP_1 2 VPGROUP_1 3 VPGROUP_1 4 VPGROUP_1 5 VPGROUP_1 6 VPGROUP_1 7 VPGROUP_1 8 VPGROUP_1 9 50:00: - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 191
Blocks 8192/8192 Request Blocks 8192/8192 Event Blocks 4096/4096 Control Blocks 1024/1024 Client Req Blocks 8192/8192 FCIP Buffer Pool 0/0 FCIP Request Blocks 0/0 FCIP NIC Buffer Pool 0/0 1K Buffer Pool 69623/69632 4K Buffer Pool 4096/4096 Sessions 4096/4096 Connections: GE1 GE2 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 192
Blocks 8192/8192 Request Blocks 8192/8192 Event Blocks 4096/4096 Control Blocks 1024/1024 Client Req Blocks 8192/8192 FCIP Buffer Pool 0/0 FCIP Request Blocks 0/0 FCIP NIC Buffer Pool 0/0 1K Buffer Pool 69632/69632 4K Buffer Pool 4096/4096 Sessions 4095/4096 Connections: GE1 GE2 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 193
6-Command Line Interface show mgmt show mgmt Displays management port information, including the IP address, subnet mask, and gateway. Authority guest Examples The following example shows the show mgmt command: iSR6200 #> show mgmt Management Port Information IPv4 Interface Enabled - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 194
configuration details of the selected job. Authority guest Examples The following example shows the show migration command for an offline data migration job: iSR6200 #> show migration Migration 01:60:f9:31:22:00:0b:c3:95:bd:c9:76:de:11 10.00 GB HP HSV210-6 1:4 60:05:08:b4:00:05:4d:94:00:00:f0: - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 195
-3:VPG1:001 Group 0 Online (Local) 1 Running 64 KB 1% Complete 17 MBps Thu Mar 19 05:34:13 2009 ----HP HSV200-0 1:1 60:05:08:b4:00:07:59:a4:00:02:d0:00:00:8d:00:00 PB5A8C3AATK8BW 10.00 GB NETAPP LUN-3 1:1 NETAPP LUN P3TPeJZ4dMV6 P3TPeJZ4dMV6 12.00 GB Not Thin Provisioned 0 ISR654608-00 C 6-89 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 196
the data migration logs and the operation performed on it. Authority guest Examples The following example shows the show migration_logs command: iSR6200 #> show migration_logs 6 Mon Jan 10 13:23:14 2011 Seq id: 448 : Job Type: Migration (Remote Online) : Destination LUN : Thin Provisioned - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 197
Type: Migration (Online) : miguser :ADDED : MigrOwner 1 : JobId 0( Online) of group data migration log in the CLI: iSR6200 #> show migration_logs 5 Thu Sep 10 13:15:49 2010 Seq id: 645 : Job Type: Migration : miguser :COMPLETED : JobId 0(Offline) of group Group 0 with priority 0 from Target HP - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 198
0(Offline) of group Group 0 with priority 0 from Target HP HSV200-0 Lun Invalid Wwuln(6) to Target HP HSV200-0 Lun Invalid Wwuln(7) with migration size 5.00 GB Thu Sep 10 13:38:37 2010 Seq id: 648 : Job Type: Migration : miguser :STARTING MIGRATION : JobId 0(Offline) of group Group 0 with priority - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 199
a path in failover scenarios. The paths specified as passive are not used by data migration jobs if the current path fails. The passive path is only capable of reading Symbolic Name Target Type 0 50:00:1f:e1:50:0a:e1:49, 8c-02-00 HP HSV200-0 Src+Dest 1 50:06:01:62:41:e0:49:2e, 82-01-00 DGC - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 200
6-Command Line Interface show migration_luninfo Lun State Online Lun WWULN Information EUI Based WWULN 4a:5a:34:64:4d:56:36:00:0a:98:00:50:33:54:50:65 NAA Based WWULN 60:a9:80:00:50:33:54:50:65:4a:5a:34:64:4d:56:36 LUN Path Information Controller Id - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 201
6-Command Line Interface show migration_params show migration_params Displays the current system time and the start time for a serial scheduled job. (The start time is set using the start_serial_jobs command; see "start_serial_jobs" on page 6-109.) Authority guest Examples The following example - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 202
show migration_perf show migration_perf Displays the migration performance of a specified data migration job. Authority guest Examples The following example shows the show migration_perf command: iSR6200 #> show migration_perf 0 Retrieving Migration Job (Id: 0) IO Statistics... (Press any - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 203
consumed by active jobs 0.00 GB Total Data Scrubbing License available 9947.00 GB Array Based Licenses Array based licenses issued 10 Array based licenses used 2 Available array based licenses 8 Licensed for : Local Migration 01. Symbolic name DGC RAID-1 No of ports registered - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 204
6-Command Line Interface show migration_usage Available Data Scrubbing Array based licenses 8 Licensed for : Scrubbing 01. Symbolic name DGC RAID-1 No of ports registered 1 WWNN, WWPN 50:06:01:60:4b:a0:35:de 50:06:01:60:cb:a0:35:de, 6-98 ISR654608-00 C - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 205
example, 10GbE ports are present and show all the ports connected: iSR6200 #> show perf WARNING: Valid data is only displayed for port(s) that are not associated with any configured FCIP routes. Port Number -----GE1 GE2 10GE1 10GE2 FC1 FC2 Bytes/s (init_r) -------0 0 0 0 0 0 Bytes/s (init_w - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 206
example, 10GbE ports are present and shows all the ports connected: iSR6200 #> show perf byte WARNING: Valid data is only displayed for port(s) that are not associated with any configured FCIP routes. Displaying bytes/sec (total)... (Press any key to stop display) GE1 GE2 10GE1 10GE2 FC1 FC2 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 207
6-Command Line Interface show perf byte 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ISR654608-00 C 6-101 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 208
router virtual Fibre Channel ports and iSCSI presented targets. Authority guest Examples The following example shows the show presented_targets command. iSR6200 #> show presented_targets Presented Target Information FC/FCOE 0a:e1:4d VPGroup 1 iSCSI Presented Targets Name iqn. - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 209
:49 VPGroup 1 Name iqn.1992-08.com.netapp:dta.my5010h002.b1.01.50001fe1500a371c Port GE1 WWNN 50:00:1f:e1:50:0a:37:10 WWPN 50:00:1f:e1:50:0a:37:1c VPGroup 1 Name iqn.1992-08.com.netapp:dta.my5010h002.b1.01.5006016a41e0492e Port GE1 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 210
6-Command Line Interface show properties show properties Displays the CLI properties. Authority Examples guest The following example shows the show properties command: iSR6200 #> show properties CLI Properties Inactivty Timer Prompt String 15 minutes iSR6200 6-104 ISR654608-00 C - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 211
6-Command Line Interface show scrub_lun show scrub_lun Displays the scrub job details. Authority guest Examples The following example shows the show scrub_lun command: iSR6200 #> show scrub_lun Scrubbing State Type ( 1=Running 2=Failed 3=Completed 4=Serial 5=All ) : 5 Job Owner Type Status - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 212
Number HW Version SW Version Boot Loader Version BIOS Version No. of FC Ports No. of iSCSI Ports Log Level Telnet SSH FTP Temp (Front/Rear/CPU1/CPU2) Uptime iSR6200 Blade-1 Auto Enabled Disabled Enabled 0 0851E0020 20694-03 3.3.0.0rc4l 0.97.0.4 6.0.0.3 2 2 0 Enabled Enabled Enabled 39C/26C/31C/31C - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 213
ports. If one or more data LUNs are exposed to the router ports from the target, no information is shown. Authority guest Examples The following example shows the show targets command: iSR6200 #> show targets Target Information WWNN 50:08:05:f3:00:1a:15:10 WWPN 50:08:05:f3:00:1a - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 214
ports can present four virtual ports (if enabled) to zone with Fibre Channel targets and allow the target to expose more LUNs to the router. The router provides the VP group by combining virtual port entities from each Fibre Channel port. Every VP group includes one virtual port from each Fibre - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 215
one or more serial scheduled jobs that have been configured but not yet started. Authority miguser Examples The following This should be within the next 30 days. [ ] 121215002009 Started serial scheduled [migration | compare ] jobs All attribute values for that have been changed will now be - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 216
on Fibre Channel, iSCSI, and Fibre Channel over Ethernet (FCoE) ports. Authority admin Syntax targetmap add | rm Keywords add Adds the target presentation. rm Removes the target presentation. Examples The following example shows the targetmap add command using the manual option: iSR6200 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 217
Only Byte 1 of the selected FC/FCoE portal is allowed to be modified. Valid iSR6200 (admin) #> targetmap add Index ----0 1 2 3 4 5 6 7 (WWNN,WWPN/iSCSI Name 50:00:1f:e1:50:0a:e1:40,50:00:1f:e1:50:0a:e1:49 50: 1f:e1:50:0a:37:10,50:00:1f:e1:50:0a:37:18 50:00:1f:e1:50:0a:37:10,50:00:1f:e1: - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 218
6-Command Line Interface targetmap ----- ----- 0 Online 1 Online 2 Online ------ ---- 1 FC1 1 FC1 1 FC1 20:06:00:c0:dd:13:2c:c4,21:06:00:c0:dd:13:2c:c4 20:04:00:c0:dd:13: - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 219
LUNs still servicing applications. Use Serial Scheduling of migration jobs (see "Using the Data Migration Wizard" on page 5-15) instead of simultaneously starting all jobs. The iSR6200 is capable of simultaneously configuring a maximum of 256 jobs on each blade. However, QLogic recommends that - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 220
To complete data migration jobs faster, run the migration job during off-peak load hours. For online jobs, the source and destination LUNs are synchronized until the migration job is acknowledged. Optimal Configuration and Zoning In order to get the best performance from the router, configure your - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 221
" on page 7-5 When to Use Offline Data Migration For most non mission-critical applications, iSR6200 provides effective offline data migration. You can configure data migration jobs in iSR6200 while applications and servers remain online. Each iSR6200 blade can support up to 4TB per hour (typical - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 222
, QLogic recommends that LUNs under migration are balanced across two controllers of a storage array. Choosing the Right DMS Options Follow these guidelines when choosing DMS options: Use the Configure Only option to configure migration jobs while applications are still online. Start the migration - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 223
by any host other than the iSR6200 until the migration is complete. During online data migration, the host I/Os are routed through the router paths. For HP-UX hosts, ensure that the initiator type is set to HP-UX. In SANsurfer iSCSI/FC Router Manager, in the left pane under the Discovered FC - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 224
a maximum of seven arrays to be configured at any time. Arrays stored in persistence consume resources even if the array is offline and no longer needed. After the migration is complete, QLogic recommends that you remove the arrays. If the array-based license was used and the array will not - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 225
configured to a data migration job or Router Manager and verify that the state of the LUN is online. Also, make sure that the correct LUN world wide unique LUN name (WWULN) and path information are shown. Removing an Array After Completing Data Migration Jobs After you complete all data migration - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 226
NOTE: Firmware versions 3.2.x and later support both online and offline data migration, whereas firmware version 3.1.x supports only offline data migration. Migration jobs scheduled using firmware version 3.2.x and later may get "lost" in firmware 3.1.x, and may require you to configure them again - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 227
(SLES) 10 and 11 IBM AIX 5.3 and 6.1 HP-UX 11.23 and 11.31 Solaris 10 SPARC® VMware ESX 3.5 and VMware ESXi 4.1 \ NOTE: QLogic provides VMWare-specific instructions in a separate applications note that describes how to configure the data path through the iSR6200 for online data migration in - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 228
Path Through iSR6200 for Online Data Migration Windows Multipath Configuration Windows Multipath Configuration Table A-1. Configuring Microsoft MPIO on Windows 2008 OS Windows 2008 Multipathing software Microsoft MPIO Pre-migration setup 1. Enable the MPIO feature on the host. 2. Present - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 229
for Online Data Migration Windows Multipath Configuration Table A-2. Configuring Array-Specific Multipathing on Windows OS Multipathing software Pre-migration setup Windows 2008 and Windows 2003 Array-specific Microsoft Management Console (MMC) EMC PowerPath Hitachi Dynamic Link Manager (HDLM) HP - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 230
Online Data Migration Linux Multipath Configuration Linux Multipath Configuration Table A-3. Configuring Native Device Mapper-Multipath on Linux OS Linux:RHEL 4 and 5, SLES 10 and 11 Multipathing software Native Device Mapper-Multipath Pre-migration setup Enable the multipath service router - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 231
Configuring the Data Path Through iSR6200 for Online Data Migration Linux Multipath Configuration 1 For HP 10 and 11 Multipathing software EMC PowerPath Pre-migration setup Install PowerPath software as recommended by the vendor. Multipath installation Port A) Adding router path for the - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 232
the Data Path Through iSR6200 for Online Data Migration Linux Multipath Configuration Table A-5. Configuring Hitachi Dynamic Link Manager on Linux OS Linux: RHEL 4 and 5, SLES 10 and 11 Multipathing software Hitachi Dynamic Link Manager (HDLM) Pre-migration setup Install HDLM software as - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 233
iSR6200 for Online Data Migration IBM AIX Multipath Configuration IBM AIX Multipath Configuration Table A-6. Configuring EMC PowerPath on IBM AIX OS IBM AIX 5.3 and 6.1 Multipathing software EMC PowerPath (only PowerPath multipath software is qualified with AIX 5.3 and 6.1 for router insertion - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 234
Path Through iSR6200 for Online Data Migration HP-UX Multipath Configuration HP-UX Multipath Configuration Table A-7. Configuring HP PVLinks on HP-UX OS HP-UX 11.23 Multipathing software HP PVLinks (physical volume links) Pre-migration setup 1. Install the PowerPath. 2. Issue the powermt - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 235
Path Through iSR6200 for Online Data Migration HP-UX Multipath Configuration Table A-7. Configuring HP PVLinks on HP-UX (Continued) Adding router path for the removed controller port.(for example, Port B) On the HP-UX host after zoning in the router presented target controller (for example, Port - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 236
Path Through iSR6200 for Online Data Migration HP-UX Multipath Configuration Table A-8. Configuring EMC PowerPath on HP-UX (Continued) Adding router path for the removed controller port.(for example, Port B) On the HP-UX host after zoning in the router presented target controller (for example - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 237
A-Configuring the Data Path Through iSR6200 for Online Data Migration Solaris Multipath Configuration Table A-9. Configuring Native Multipathing on HP-UX (Continued) Adding router path for the removed controller port (for example, Port B) 1. On the HP-UX host after zoning in the second router - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 238
A-Configuring the Data Path Through iSR6200 for Online Data Migration Solaris Multipath Configuration Table A-10. Configuring Native Multipathing on Solaris SPARC (Continued) Adding router path for the removed controller port.(for example, Port A) Removing second direct path from controller port ( - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 239
A-Configuring the Data Path Through iSR6200 for Online Data Migration VMware Multipath Configuration VMware Multipath Configuration Table A-11. Configuring Native Multipathing on VMware ESX/ESXi OS VMware ESX 3.5 and ESXi 4.1 Multipathing software Pre-migration setup Native Multipathing None - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 240
A-Configuring the Data Path Through iSR6200 for Online Data Migration VMware Multipath Configuration A-14 ISR654608-00 C - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 241
SNMP. The router firmware supports SNMP versions 1 and 2 and a QLogic management information base (MIB). You may format traps using SNMP version 1 or 2. This appendix provides the following SNMP information for iSR6200 data migration: "SNMP Parameters" on page B-1 "SNMP Trap Configuration" on - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 242
configured. Trap address* Specifies the IP address to which the SNMP traps are sent. A maximum of eight trap addresses are supported. The default they must have different addresses. Notifications The router provides notifications for events related to data migration jobs, including when a job is: - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 243
qsrJobId, qsrJobOwner, qsrJobCreator, qsrJobType, qsrJobOpCode, qsrJobOperation, qsrJobPriority, qsrJobStartType, qsrJobErrorCode, qsrEventTimeStamp, qsrEventSeverity, qsrBladeSlot } Data Migration Service Notification Object Types qsrJobId OBJECT-TYPE Syntax Integer Status Current Description ID of - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 244
online or offline. qsrJobOpCode OBJECT-TYPE Syntax Integer Status Current Description Data migration job operation type, either migration or comparison. qsrJobOperation OBJECT-TYPE Syntax Integer Status Current Description Data migration job operation performed, and whether it was user-driven - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 245
Syntax Integer Status Current Description Data migration job error codes for all failed migration jobs. For all other jobs and job states, this field remains as zero. qsrBladeSlot Syntax Status Description Integer Accessible for notify Indicates from which blade - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 246
B-Simple Network Management Protocol Notifications B-6 ISR654608-00 C - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 247
Table C-1 lists some problems that may occur with the data migration service and provides a possible reason or solution for each. Table C-1. Troubleshooting Problem Reason and Solution The show array command either: Does not show any array entities. Does not show all the controller - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 248
will allow you to configure a migration job but will not be able to do any data access operations for that LUN. The iSR6200 displays the following messages, for example (your WWULN and LUN ID will be different): Array reconfiguration detected. Refer to user manual for trouble shooting. WWULN: 60:05 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 249
active-passive arrays, a data migration job may fail if the active path disappears from the router while host I/Os are not active. To allow the router to discover new paths, click the Refresh button a few times, and then reconfigure the migration job. No migration licenses are consumed when a job - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 250
C-Troubleshooting C-4 ISR654608-00 C - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 251
for retaining the integrity of the data and for allowing users to search, retrieve, and make use of data in the face of constantly changing technology. data migration service See DMS. DMS Data migration service. A technology that simplifies data migration jobs with minimum downtime while providing - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 252
Data Migration Service for iSR6200 User's Guide FCoE switch. graphical user interface. See GUI. GUI Graphical user interface. A user interface that is based upon icons and stack. In a system supporting iSCSI, a user or software application issues a command to store or retrieve data on a SCSI storage - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 253
Data Migration Service for iSR6200 User's Guide logical unit number See LUN. LUN Logical unit number. Representation of a logical address on a peripheral device or array of devices. metadata A component of data that describes the data. It is "data about data." Metadata describes the content, - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 254
Data Migration Service for iSR6200 User's Guide Secure shell See SSH. simple network management protocol See SNMP. small computer system interface See SCSI. SNMP Simple network management protocol. SNMP is a networking protocol that enables you to monitor the router as based on zoning Configuring a - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 255
4-3 adding data migration group in GUI 5-14 data migration job group in CLI 6-44 data migration job to schedule in CLI 6-27 data scrubbing job in CLI 6-51 admin session in CLI 6-1 administrative user session 3-16 agreements, license xviii AIX multipath configuration A-7 algorithms for data scrubbing - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 256
, troubleshooting C-1 batch mode, scheduling multiple data migration jobs 5-19 "best practices" 7-3 blade, peer, removing data migration job 6-41 blades, generated trap B-5 BridgeApp event information, viewing 6-79 C canceling admin session, CLI 6-1 miguser session, CLI 6-2 capacity-based license - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 257
command 6-17 Completed Data Migration Jobs page 5-31 configurations arrays, best practices 7-5 direct attach 2-1 fabric 2-2 supported 2-1 configure only option 3-6 configure verifying jobs wizard 5-28 scheduling 5-29 starting 5-29 configuring fabric 5-3 host multipathing software A-1 SNMP parameters - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 258
43 stopping in GUI 5-25 thin-provisioned LUNs 3-9 Data Migration Jobs Options dialog box 5-17, 5-20, 5-29 data migration licenses 4-1 array-based, applying to specific array in CLI 6-63 array-based, applying to specific array in GUI 4-4 array-based, described 4-1 capacity-based, described 4-1 Index - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 259
6-105 data scrubbing licenses 4-2 data scrubbing, See also scrubbing data scrubbing, support for 1-2 data security 1-2 data, scrubbing from LUNs 5-36 date and time, SNMP B-5 debugging overview 1-3 defaults, resetting factory 6-49 delayed schedule 3-5 Data Migration Service for iSR6200 User's Guide - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 260
Data Migration Service for iSR6200 User's Guide E end user license agreements xviii error codes, data migration jobs B-5 ESX multipath configuration A-13 event notifications for system 6-64 events severity B-5 time stamp B-5 exporting data migration log to CSV file 5-28 migration logs to CSV file - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 261
Data Migration Service for iSR6200 User's Guide high availability, See HA history, revision ii host multipathing software, configuring A-1 HP-UX multipath configuration A-8 I I/O definition of Glossary-2 size for migration job, setting in CLI 6-36 IBM AIX multipath configuration A-7 immediate - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 262
presenting from iSCSI arrays 5-6 presenting to router 5-4 presenting to server for online data migration 5-7 rescanning devices 6-48 scrubbing data from 5-36 source and destination 3-3 thin-provisioned, migration to 3-9 M management port information, viewing in CLI 6-87 mapping defaults, restoring - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 263
Data Migration Service for iSR6200 User's Guide N networking protocols supported 1-1 new data migration group, naming 6-44, 6-45 new fabric, configuration of 2-3 New License Key dialog box 4-3 notifications SNMP B-2 system 6-64 O objects qsrBladeSlot B-5 qsrDMNotification B-3 qsrEventSeverity B-5 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 264
8-1 resuming compare LUN job in CLI 6-13 data migration job in CLI 6-38 data migration job in GUI 5-25 data scrub job 6-56 revision history, of this guide ii router configuration, restoring factory defaults 6-49 Router Log (Migration Log) dialog box 5-27, 5-28 Router Log (System Log) dialog box 5-26 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 265
Data Migration Service for iSR6200 User's Guide save capture command 6-50 saving data migration license key in CLI 6-66 data migration reports 5-38, 6-39 license information to a report 5-41 system log to file 6-50 scheduling batch migration job in GUI 5-19 data migration jobs (overview) 3-5 data - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 266
Data Migration Service for iSR6200 User's Guide SNMP definition of Glossary-4 notifications B-2 object types B-3-B-5 parameters, configuring B-1 router, managing with B-1 trap configuration B-2 software end user license agreements xviii software setup 2-12 Solaris multipath configuration A-11 - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 267
to server 5-38, 6-39 URL, saving license information 5-41 usage, data migration and scrubbing license viewing in GUI 4-6 user sessions (CLI) 6-1 admin 6-1 miguser 6-2 user sessions, types of 3-16 V validation for thin-provisioned storage 3-10 vendor arrays, support for 1-1 verify jobs, status of - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 268
Data Migration Service for iSR6200 User's Guide W what's in this guide xv Windows multipath configuration A-2 wiping data from LUNs 3-14 wizards data migration 5-15 remove data management LUN 5-35 scrubbing LUN 5-36 verify migration on 2-12 troubleshooting C-1, C-3 Index-14 ISR654608-00 C - HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 269
- HP MPX200 | QLogic Data Migration Service for iSR6200 User's Guide (ISR654608-00 - Page 270
CLARiiON, Navisphere, and Symmetrix are registered trademarks of EMC Corporation. HP is a registered trademark of Hewlett-Packard Company. IBM and QLogic Corporation is believed to be accurate and reliable. QLogic Corporation assumes no responsibility for any errors in this manual. QLogic
ISR654608-00
C
Data Migration Service
for iSR6200
User’s Guide