HP MPX200 QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601-
HP MPX200 Manual
View all HP MPX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP MPX200 manual content summary:
- HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 1
iSR6200 Command Line Interface (CLI) User's Guide ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 2
. "Logging on to a SAN Router" on page 1-1 Updated the help command output, and updated "Understanding the Guest Account" on page 1-2 the software version number in the show chassis command example output. Corrected the command prompt. "Installing the Firmware Via Telnet" on page 1-6 Updated - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 3
iSR6200 Command Line Interface (CLI) User's Guide Updated the show features command exam- "Show Features" on page instructions for connecting Chapter 5 Configuring Fibre Channel Initiators to Fibre Channel hosts to iSCSI Dell EqualLogic tar- iSCSI Storage gets using the iSR6240 and iSR6250 routers. - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 4
iSR6200 Command Line Interface (CLI) User's Guide Added new FCIP driver module messages 172300 Appendix B Log Messages through 172322. Updated back cover page per current template. Back page iv ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 5
Guide xi Related Materials xii Documentation Conventions xiii License Agreements xiv Technical Support xiv Training xiv Contact Information xv Knowledge Database xv 1 CLI Usage Logging on to a SAN Router 1-1 Understanding the Guest Account 1-2 Working with SAN Router Configurations - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 6
iSR6200 Command Line Interface (CLI) User's Guide Commands (continued) FcipRoute FRU Help History Image Initiator Logout Lunmask Passwd Ping Quit Reboot Reset Save Set Set Alias Set CHAP Set Chassis Set FC Set Features Set iSCSI Set iSNS Set Mgmt Set NTP Set Properties Set - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 7
(CLI) User's Guide Commands ( iSCSI Storage Prerequisites 5-1 Configuration Overview 5-1 Step 1: Discover the iSCSI Targets 5-2 Using the iSCSI Discover Command 5-2 Using iSNS Server Connectivity 5-3 Step 2: Log into the iSCSI Targets 5-6 Step 3: Zone the Fibre Channel Host and iSR6200 Router - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 8
User's Guide A B Glossary Index Step 4: Map the iSCSI Target into the SAN and Provide Host Access to the Storage LUN 5-7 Step 5: View the Newly Mapped Target Zoned to the Fibre Channel Host 5-9 Simple Network Management Protocol SNMP Parameters SNMP Trap Configuration Notification FCIP Route - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 9
Set 5-3 Zone Configured with Router 5-4 iSCSI Configured with Router to Fibre Channel SAN Page 5-4 5-5 5-7 5-10 List of Tables Table Page 2-1 CLI Chassis Commands 2-1 2-2 CLI Blade Commands 2-2 2-3 Command Line Completion Keystrokes 2-4 5-1 Zone Host with Router-Fibre Channel-Based Ports - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 10
iSR6200 Command Line Interface (CLI) User's Guide x ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 11
to use the command line interface (CLI) to configure and manage the QLogic iSR6200 Intelligent Storage Router (iSR6200). Intended Audience This user's guide is intended for individuals who are responsible for installing and servicing the iSR6200 router and the storage area network (SAN) equipment to - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 12
, refer to the following documents: iSR6250 Quick Start Guide, part number SN0054545-00 iSR6250 Router Installation Guide, part number SN0051103-00 iSR6200 Router Installation Guide, part number ISR651101-00 iSR6200 Router Manager User's Guide, part number ISR654602-00 Internet Protocol, Version - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 13
to a figure, table, or section in this guide. Links to Web sites are shown in underlined blue saved data. Type of restore (0=full, 1=mappings only) [full] Use the show iscsi command to find the iSCSI node name of license agreements, refer to the QLogic Software End User License Agreement. ISR654601 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 14
the Support tab at the top, and then click the Education & Training on the left. The QLogic Global Training Portal offers online courses, certification exams, and scheduling of in-person training. Technical Certification courses include installation, maintenance, and troubleshooting QLogic products - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 15
with extended service, consult your plan for available hours. For Support phone numbers, see the Contact Support link at http://support.qlogic.com. Support Headquarters QLogic Corporation 4601 Dean Lakes Blvd. Shakopee, MN 55379 USA QLogic Web Site www.qlogic.com Technical Support Web Site - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 16
xvi ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 17
the Guest Account" on page 1-2 "Working with SAN Router Configurations" on page 1-4 "Installing the Firmware Via Telnet" on page 1-6 Logging on to a SAN Router You can either use Telnet or Secure SHell (SSH) to log on to a router, or you can log on to the router through the serial port. To log on to - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 18
the Guest Account Routers come from the factory with the following account already defined: Account name: guest Password: password This guest account provides access to the router and its configuration. After planning your router management needs, consider changing the password for this account - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 19
the Guest Account reset [ factory | mappings ] show [ chassis ] iSR6200 #> show chassis Chassis Information Product Name Chassis Name Serial Number HW Version Fan Speed ISR6200 Router Chassis Name 0834E00019 20697-03 A Normal Blade 1 Information (Left Slot) Status Online Product Name - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 20
page 2-26) Saving and Restoring Router Configurations Saving and restoring a configuration helps protect your work. You can also use a saved configuration as a template for configuring other routers. Saving Blade Configuration and Persistence Persistent data consists of system settings, virtual port - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 21
router configuration data on the router: c:\> ftp 172.17.137.102 Connected to 172.17.137.102. 220 (none) FTP server (GNU inetutils 1.4.2) ready. User (172.17.137.102:(none)): ftp 331 Guest login ok, type your name as password. Password: ftp 230 Guest login ok, access restrictions apply. ftp> bin 200 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 22
and iSCSI initiators. Installing the Firmware Via Telnet This section provides the steps required for installing the iSR6200 router firmware. To install the firmware via Telnet: 1. Download the iSR6200 Router firmware to your workstation from the QLogic Web site: http://driverdownloads.qlogic.com - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 23
.86Kbytes/sec. ftp> quit 221 Goodbye. C:\fwImage> 5. Install the firmware image on the router. For example: iSR6200 login: guest Password: password (default login password) * * * ISR6200 * * * iSR6200 #> iSR6200 #> blade 1 (specify blade to be updated, 1 or 2) iSR6200 #> admin - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 24
1-CLI Usage Installing the Firmware Via Telnet Unpack Completed. A reboot is required for the FW to take affect. Do you wish to reboot the System at the current time (y/n): y two blades, update both blades before rebooting) (if there are System will now be rebooted... 1-8 ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 25
lists and describes the iSR6200 Intelligent Storage Router CLI commands in alphabetical order. Each command description includes its syntax, keywords, notes, and examples. Command Lists The tables in this section provide references to the chassis level and blade level commands used in the iSR6200 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 26
blade management command. Table 2-2. CLI Blade Commands For Commands Starting with: Refer to Section: A "Admin" on page 2-6 B "Beacon" on page 2-7 C "Clear" on page 2-9 D "Date" on page 2-10 " on page 2-33 "Reset" on page 2-34 S "Save" on page 2-35 "Shutdown" on page 2-106 2-2 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 27
Section: Set Show T "Set" on page 2-37 "Set Alias" on page 2-39 "Set CHAP" on page 2-41 "Set Chassis" on page 2-42 "Set FC" on page 2-43 "Set Features" on page 2-44 "Set iSCSI" on page 2-45 "Set iSNS" on page 2-46 "Set Mgmt" on page 2-47 "Set NTP" on page 2-49 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 28
example, [value]. Optional keyword values appear in italics within brackets; for example, [value]. In command prompts, or indicates which blade is being managed. Command Line Completion The command line completion feature simplifies entering and repeating commands. Table 2-3 describes the - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 29
you to be in an administrator session. Note that: Commands related to monitoring tasks are available to all account names. Commands related to configuration tasks are available only within an Admin session. An account must have Admin authority to enter the admin start command, which opens an admin - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 30
session. Any command that changes the router configuration must be done in an Admin and reset commands also end an Admin session. cancel Terminates an Admin session opened by another user. Use Admin session: iSR6200 #> admin start Password : ****** iSR6200 (admin) #> . . . iSR6200 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 31
Command Syntax Beacon Enables or disables flashing the blue beacon LED. Authority None Syntax beacon on off Keywords on Turns on the router beacon. off Turns off the router beacon. Examples The following example shows the beacon command: iSR6200 #> beacon on ISR654601-00 D 2-7 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 32
This command is only valid at the chassis prompt. The chassis CLI prompt does not include the blade number (for example, iSR6200 #>), whereas the blade CLI prompt includes the blade number (for example, iSR6200 #>). Authority None Syntax blade [1 or 2] Examples The following example of the - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 33
Removes all entries (events) from the router log file, or resets the Fibre Channel and iSCSI statistic counters. Authority Admin session Syntax clear logs stats Keywords logs Clears all entries from the router's log file. stats Resets the statistic counters. Examples The following examples - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 34
year). The new date and time takes effect immediately. Each blade has its own independent date set. Properly setting the date The date must be set prior to applying any feature keys or licenses. Authority Admin session required to set the date and time. No Jan 2 14:28:14 2010 2-10 ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 35
. (Same as the quit command.) Authority None Syntax exit Examples The exit command behaves differently depending on whether you at the chassis or blade management level. At the chassis management level, exit returns you to the login prompt. The following example shows the exit command for the - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 36
add Configures a new FCIP route. mod Modifies an existing FCIP route. rm Removes an existing FCIP route. Notes You can also configure an FCIP route over a 10Gb Ethernet port, provided that the router has both an available 10Gb port and the FCIP 10Gb license installed. The same FCIP commands - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 37
10Gb FCIP route. At the GE Port prompt, you must select a 10Gb Ethernet port. Set the Window Scaling Factor to 3 for the default window following command might cause a loss of connections to both GE ports. Configuring FCIP Route: FCIP Interfaces FC & GE (0=Enable, 1=Disable) [Enabled FC Port - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 38
a loss of connections to both GE ports. Route FC Port ID GE Port ID 1 FC1 GE1 Please select a FCIP route from the list above ('q' to quit): 1 Configuring FCIP Route: FCIP Interfaces FC & GE (0=Enable, 1=Disable) [Enabled ] IP Address (IPv4 or IPv6; 0=IPv6 Link Local) [172.35.15.11 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 39
so. WARNING: The following command might cause a loss of connections to both GE ports. Route FC Port ID GE Port ID 1 FC1 GE1 Please select a FCIP route from the list above ('q' to quit): 1 FCIP Route 1 has been removed from the system. ISR654601-00 D 2-15 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 40
. save The fru save command creates a tar file containing the blade's persistent data, configuration, and LUN mappings. The file is stored in the router's /var/ftp directory. You must then FTP the tar file from the router. Examples The following example shows the fru restore command: iSR6200 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 41
sets: General iSCSI Server Connectivity Data Migration SAN over chassis and the blade. The following example shows the help command for the chassis: iSR6200 #> help admin [ begin | end | start | stop | cancel ] blade [ 1 | 2 ] exit help history logout quit reset [ factory | mappings ] show [ chassis - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 42
logout passwd ping quit reboot reset [ factory | mappings ] save [ capture | logs | traces | portstats ] save capture save logs save traces save portstats set [ alias | chap | chassis | event_notification fc | features | iscsi | isns mgmt | ntp | properties - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 43
properties snmp | stats | system | targets vpgroups | portstats ] show chap show chassis show event_notification show fc [ ] show features show feature_keys show initiators [ fc | iscsi ] show iscsi [ ] show isns show logs [ ] show luninfo show luns - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 44
Command Reference Command Syntax show initiators_lunmask show lunmask Data Migration Command Set: array rm compare_luns [ add | acknowledge | rm | start | stop | pause | resume | rm_peer] dml [ create | delete ] migration [ add | acknowledge | rm | start | stop | pause | resume | rm_peer - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 45
2-Command Reference Command Syntax History Lists numerically the previously entered commands. Authority None Syntax history Examples The following example shows the history command: iSR6200 (admin) #> history 1: admin start 2: help 3: history iSR6200 (admin) #> ISR654601-00 D 2-21 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 46
files transferred by the user when updating the router's firmware image. list [file] Lists the firmware image files in the router's /var/ftp directory. unpack [file] Unpacks the firmware image file specified in the [file] parameter and installs the firmware image on the router. Prior to using this - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 47
initiator add mod remove Keywords add Adds an initiator to the router's database. mod Modifies the settings of an initiator. rm (remove (0-9), colon, hyphen, and period. iSCSI Initiator Name (Max = 223 characters) [ ] iqn.1991-05.com.microsoft:qlogic-09sd5i4l OS Type (0=MS Windows, 1= - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 48
shows the initiator rm (remove) command: iSR6200 (admin) #> initiator rm Index Status 0 LoggedOut 1 LoggedOut (WWNN,WWPN/iSCSI Name test iqn.1991-05.com.microsoft:qlogic-09sd5i4l Please select a 'LoggedOut' Initiator from the list above ('q' to quit): 0 All attribute values for that have - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 49
2-Command Reference Command Syntax Logout Exits the CLI and returns you to the login prompt. Authority None Syntax logout Examples The following example shows the logout command: iSR6200 (admin) #> logout (none) login: ISR654601-00 D 2-25 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 50
example shows the lunmask add command: iSR6200 (admin) #> lunmask add Index ----0 (WWNN/iSCSI Name iqn.1991-05.com.microsoft:qlogic-09sd5i4l Please select an Initiator from the list above ('q' to quit): 0 Index ----0 1 2 3 (WWNN,WWPN/iSCSI Name 20:00:00:20:37:fd:8b:ab,22:00:00:20:37:fd:8b - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 51
quit): 0 Index ----1 2 3 4 (VpGroup Name VPGROUP_1 VPGROUP_2 VPGROUP_3 VPGROUP_4 Multiple VpGroups are currently 'ENABLED'. Please select a VpGroup from the list above ('q' to quit): 1 Index ----0 1 (WWNN,WWPN/iSCSI Name 50:06:01:60:c1:e0:0d:a2,50:06:01:60:41:e0:0d:a2 50:06:01:60:c1:e0:0d:a2 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 52
the list above ('q' to quit): 0 Index Initiator 0 iqn.1991-05.com.microsoft:qlogic-09sd5i4l Please select an Initiator to remove ('a' to remove all, 'q' to quit): groups: iSR6200 (admin) #> lunmask rm Index ----0 1 (WWNN,WWPN/iSCSI Name 50:06:01:60:c1:e0:0d:a2,50:06:01:60:41:e0 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 53
2-Command Reference Command Syntax 4 0/VPGROUP_2 DGC Please select a LUN from the list above ('q' to quit): 0 Index Initiator 0 iqn.1991-05.com.microsoft:winhaz38 Please select an Initiator to remove ('a' to remove all, 'q' to quit): 0 All attribute values that have been changed will - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 54
(admin) #> passwd Press 'q' and the ENTER key to abort this command. Select password to change (0=guest, 1=admin) : 1 account OLD password : ****** account NEW password (6-128 chars) : ****** please confirm account NEW password : ****** Password has been changed. 2-30 ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 55
or IPv6) [0.0.0.0] fe80::217:a4ff:fe99:c279 Iteration Count (0=Continuously) [0 ] 10 Outbound Port (0=Mgmt, 1=GE1, 2=GE2, ...) [Mgmt ] Size Of Packet Bytes) [56 ] Pinging fe80::217:a4ff:fe99:c279 with 56 bytes of data: Request timed out. Reply from fe80::217:a4ff:fe99:c279: bytes=64 time - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 56
. (Same as the exit command.) Authority None Syntax quit Examples The quit command behaves differently depending on whether you at the chassis or blade management level. At the chassis management level, quit returns you to the login prompt. The following example shows the quit command for the - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 57
2-Command Reference Command Syntax Reboot Restarts the blade firmware. Authority Admin session Syntax reboot Examples The following example shows the reboot command: iSR6200 (admin) #> reboot Are you sure you want to reboot the System (y/n): y - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 58
2-Command Reference Command Syntax Reset Restores the router configuration parameters to the factory-default values. The reset factory command deletes all LUN mappings, as well as all persistent data regarding targets, LUNs, initiators, virtual port group settings, log files, iSCSI and MGMT IP - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 59
ftp directory. After the command completes, you must FTP the log's tar file from the blade. traces The save traces command creates a tar file that contains the router's dump data, storing the tar file in the router's /var/ftp directory. After the command completes, you must FTP the trace's tar file - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 60
2-Command Reference Command Syntax The following example shows the save traces command: iSR6200 (admin) #> save traces Save ASIC Traces completed. Package is Router_Asic_Trace.tar.gz Please use FTP to extract the file out from the System. The following examples show the save portstats command - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 61
2-Command Reference Command Syntax Set Configures general router parameters, as well as parameters that are specific to the Fibre Channel, iSCSI, and management ports. Authority Admin session Syntax set alias chap chassis fc [ ] features iscsi [ ] isns mgmt ntp properties - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 62
Mgmt" on page 2-47.) ntp Sets the network time protocol (NTP) parameters. (See "Set NTP" on page 2-49.) properties Configures CLI properties for the blade. (See "Set Properties" on page 2-50.) snmp [trap_destinations [ ]] Sets the simple network management protocol (SNMP) parameters. (See - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 63
press 'q' or 'Q' and the ENTER key to do so. Index ----0 1 2 3 (WWNN,WWPN/iSCSI Name iqn.2004-08.com.qlogic:isr6200.0823e00010.b2.01.50001fe150069d2c iqn.2004-08.com.qlogic:isr6200.0823e00010.b2.01.50001fe150069d29 iqn.2004-08.com.qlogic:isr6200.0823e00010.b2.01.50001fe150069d2d iqn.2004-08.com - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 64
9d:20 WWPN 50:00:1f:e1:50:06:9d:2c Name iqn.2004-08.com.qlogic:isr6200.0823e00010.b2.01.50001fe150069d29 Alias WWNN 50:00:1f:e1:50:06 9d:20 WWPN 50:00:1f:e1:50:06:9d:29 Name iqn.2004-08.com.qlogic:isr6200.0823e00010.b2.01.50001fe150069d2d Alias WWNN 50:00:1f:e1:50: - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 65
for the configuration of the challenge handshake authentication protocol (CHAP). For configuration details, see 3 Configuring CHAP. iSCSI Name ---------iqn.2004-08.com.qlogic:iSR6200:test.0 iqn.2004-08.com.qlogic:iSR6200:test.1 iqn.1991-05.com.microsoft:qlogic-09sd5i4l iqn.2004-08.com.qlogic: - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 66
current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. Chassis Name (Max = 64 characters) [ ] rack 14 All attribute values that have been changed will now be saved. 2-42 ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 67
Fibre Channel port. Authority Admin session Syntax set fc [ ] Keywords [ ] The number of the Fibre Channel port to be configured. Examples The following example shows the set fc command: iSR6200 (admin) #> set fc A list of attributes with formatting and current values - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 68
Command Reference Command Syntax Set Features Applies license keys to the router. The date and time must be set on the router prior to applying a new feature key -ISR6200-SW Feature Key is added to the blade. All attribute values that have been changed will now be saved. 2-44 ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 69
IPv6 Address 1 [:: ] IPv6 Address 2 [:: ] IPv6 Default Router [:: ] IPv6 TCP Port No. (Min=1024, Max=65535) [3260 ] IPv6 VLAN (0=Enable, 1=Disable) [Disabled ] iSCSI Header Digests (0=Enable, 1=Disable) [Disabled ] iSCSI Data Digests (0=Enable, 1=Disable) [Disabled ] All attribute - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 70
2-Command Reference Command Syntax Set iSNS Configures iSNS parameters for a blade. Authority Admin session Syntax set isns Examples The (IPv4 or IPv6) TCP Port No. [Disabled [0.0.0.0 [3205 ] 0 ] 10.3.6.33 ] All attribute values that have been changed will now be saved. 2-46 ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 71
Command Reference Command Syntax Set Mgmt Configures the blade's management port (10/100). Authority Admin session Syntax set Rarp) IPv6 Interface (0=Enable, 1=Disable) IPv6 Mode (0=Manual, 1=AutoConfigure) [Enabled] [Dhcp ] [Enabled] [Manual ] 1 All attribute values that have been changed will - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 72
2-Command Reference Command Syntax IPv6 Interface (0=Enable, 1=Disable) [Disabled ] All attribute values that have been changed will now be saved. 2-48 ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 73
2-Command Reference Command Syntax Set NTP Configures the NTP parameters. Authority Admin session Syntax set ntp Examples The following example shows the set ntp command: iSR6200 (admin) #> set ntp A list of attributes - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 74
2-Command Reference Command Syntax Set Properties Configures CLI properties for the blade. Authority Admin session Syntax set properties Examples The following example shows the set properties command: iSR6200 (admin) #> set properties A list of attributes with formatting and - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 75
Configures the general SNMP properties, as well as configuring ENTER key to do so. Configuring SNMP Read Community Trap Community . The following example shows configuring an SNMP trap destination: Configuring SNMP Trap Destination 1 Destination enabled (0=Enable, 1=Disable) IP Address [Disabled - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 76
SNMP Trap Destination 6 : Destination enabled (0=Enable, 1=Disable) [Disabled ] Configuring SNMP Trap Destination 7 : Destination enabled (0=Enable, 1=Disable) [Disabled ] Configuring SNMP Trap Destination 8 : Destination enabled (0=Enable, 1=Disable) [Disabled ] All attribute - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 77
Set System Configures the blade system-wide (Max = 64 characters) Target Presentation Mode (0=Auto, 1=Manual) Lun Mapping (0=Enable, 1=Disable) Controller Lun AutoMap (0=Enable System Log Level (Default,Min=0, Max=2) Time To Target Device Offline (Secs,Min=0, Max=120) [Blade-1 [Auto [Enabled - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 78
enable virtual port groups 2 and 3: iSR6200 (admin) #> set vpgroups The following wizard will query for attributes before persisting and activating the updated mapping in the system configuration. If you wish to terminate this wizard before reaching the end of the list press 'q' or 'Q' and the - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 79
| mins> presented_targets [fc or iscsi] properties snmp stats targets [fc or iscsi] system vpgroups [vpgroup index] Keywords chap Displays configured CHAP iSCSI nodes. (See "Show CHAP" on page 2-58.) chassis Displays chassis information and status. (See "Show Chassis" on page 2-59.) fc - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 80
and the LUNs to which they are mapped. (See "Show Initiators LUN Mask" on page 2-66.) iscsi [port_num] Displays iSCSI port information and configuration. (See "Show iSCSI" on page 2-67.) isns [port_num] Displays the router's iSNS configuration. (See "Show iSNS" on page 2-71.) logs Displays the - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 81
See "Show SNMP" on page 2-93.) stats Displays the router statistics, both Fibre Channel and iSCSI. (See "Show Stats" on page 2-94.) system Displays router product information including serial number, software version, hardware version, configuration, and temperature. (See "Show System" on page 2-101 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 82
show chap Examples The following example shows the show chap command: iSR6200 (admin) #> show chap The following is a list of iSCSI nodes that have been configured with CHAP 'ENABLED': Type -------Init iSCSI Node -----------iqn.1991-05.com.microsoft:qlogic-09sd5i4l 2-58 ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 83
/Rear/CPU1/CPU2) 48C/36C/37C/41C Power Cooling Module 1 Status Power Source Fan1/Fan2/Fan3 Installed Connected Healthy/Healthy/Healthy Blade 2 Information (Right Slot) Status Online Product Name iSR6200 Symbolic Name Blade-2 Serial Number 0836E00018 HW Version 20694-03 A ISR654601 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 84
2-Command Reference Command Syntax SW Version 3.3.0.0 Temp (Front/Rear/CPU1/CPU2) 46C/34C/38C/38C Power Cooling Module 2 Status Power Source Fan1/Fan2/Fan3 Installed Not Connected Healthy/Healthy/Healthy 2-60 ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 85
Mode Link Status Current Link Rate Programmed Link Rate WWNN WWPN Port ID WWNN WWPN Port ID WWNN WWPN Port ID WWNN WWPN Port ID Firmware Revision No. Frame Size Execution Throttle Connection Mode Programmed Connection Option SFP Type FC2 Enabled FCP Up 8Gb Auto 20:00:00:c0:dd:12 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 86
2-Command Reference Command Syntax Show FcipRoutes Displays FCIP route configuration parameters. Authority None Syntax show fciproutes [link_id] Keywords [link_id] Specifies the number of the FCIP route to be displayed (1 or 2). Examples The following example shows the show fciproutes command. - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 87
None Syntax show features Examples The following examples shows the show features command. iSR6200 #> show features License Information FCIP 1Gig Licensed FCIP 10Gig Licensed DM Capacity Licensed DM Array Licensed DS Capacity Licensed DS Array Licensed ISR654601-00 D 2-63 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 88
:8b:a8:b6:02 00-00-00 Logged Out FC Windows Initiator Name Alias IP Address Status Type OS Type iqn.1991-05.com.microsoft:qlogic-1 0.0.0.0 Logged Out ISCSI Windows Initiator Name Alias IP Address iqn.1991-05.com.microsoft - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 89
Status Type OS Type Logged Out ISCSI Windows 2-Command Reference Command Syntax ISR654601-00 D 2-65 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 90
user-selected initiator. Authority None Syntax show initiators_lunmask Examples The following example shows the show initiators_lunmask command: iSR6200 #> show initiators_lunmask Index (WWNN,WWPN/iSCSI 2 ISCSI iqn.1991-05.com.microsoft:qlogic-1 3 ISCSI iqn.1991-05.com.microsoft:qlogic-2 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 91
iscsi port command: iSR6200 (admin) #> show iscsi iSCSI Port Information iSCSI Port Port Status Port Mode Link Status iSCSI Name Firmware Default Router IPv6 Target TCP Port No. IPv6 VLAN iSCSI Max First Burst iSCSI Max Burst iSCSI Header Digests GE1 Enabled iSCSI Up iqn.2004-08.com.qlogic: - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 92
IPv4 VLAN IPv6 Address 1 IPv6 Address 2 IPv6 Link Local IPv6 Default Router IPv6 Target TCP Port No. IPv6 VLAN iSCSI Max First Burst iSCSI Max Burst iSCSI Header Digests iSCSI Data Digests Bandwidth, MB/sec GE2 Enabled iSCSI Up iqn.2004-08.com.qlogic:isr6200.0951f00579.b1 3.00.01.57 100Mb/FDX Auto - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 93
65536 262144 Disabled Disabled 1250 iSCSI Port Port Status Port Mode Link Status iSCSI Name Firmware Revision Current Port Speed Programmed Port 2 IPv6 Link Local IPv6 Default Router IPv6 Target TCP Port No. 10GE2/FCOE2 Enabled iSCSI Down iqn.2004-08.com.qlogic:isr6200.0951f00579.b1 1.0.0.0 10Gb - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 94
2-Command Reference Command Syntax IPv6 VLAN iSCSI Max First Burst iSCSI Max Burst iSCSI Header Digests iSCSI Data Digests Bandwidth, MB/sec Disabled 65536 262144 Disabled Disabled 1250 2-70 ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 95
. If you do not specify the port, this command displays the iSNS configuration information for all iSCSI ports. Authority None Syntax show isns [port_num] Keywords [port_num] The iSCSI port number whose iSNS configuration is to be displayed. Examples The following example shows the show isns - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 96
Keywords [last_x_entries] Shows only the last x number of logs entries. For example, show logs 10 displays the last ten entries in the router event log. The show logs command displays the entire router event log. Examples The following example shows the show logs command: iSR6200 #> show logs - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 97
Examples The following example shows the show luninfo command: iSR6200 (admin) #> show luninfo Index (WWNN,WWPN/iSCSI Name) 0 20:00:00:14:c3:3d:d2:e2,21:00:00:14:c3:3d:d2:e2 1 20 9 20:00:00:14:c3:3d:d2:c1,21:00:00:14:c3:3d:d2:c1 10 20:00:00:0c:50:a6:6a:92,21:00:00:0c:50:a6:6a:92 11 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 98
2-Command Reference Command Syntax VendorId ProductId ProdRevLevel Portal Lun Size Lun State SEAGATE ST336754FC XR22 0 35003 MB Online LUN Path Information Controller Id - WWPN,PortId / IQN,IP 21:00:00:14:c3:3d:d2:e2, 62-01-63 Path Status ----------Current 2-74 ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 99
VPGROUP_1 VPGROUP_2 VPGROUP_2 VPGROUP_2 VPGROUP_2 VPGROUP_2 LUN Serial Number/WWULN 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 iSCSI Name iqn.2001-05.com.equallogic:0-8a0906-bc4a49907-3b4fb16b0b14c529-demo LUN --0 iSCSI Name iqn.2001-05.com.equallogic:0-8a0906-fc9829a07-d41fb16bae64cffa-demo-1 LUN - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 100
2-Command Reference Command Syntax 0 iSCSI Name iqn.2001-05.com.equallogic:0-8a0906-01e829a07-58afb16bae94cffb-demo-2 LUN --0 2-76 ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 101
Show Lunmask Displays all initiators mapped to a user-specified LUN. Authority None Syntax show lunmask Examples The following example shows the show lunmask command: iSR6200 #> show lunmask Index ----0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 (WWNN,WWPN/iSCSI Name 20:00:00:14:c3:3d:d2 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 102
2-Command Reference Command Syntax Target LUN --0 iqn.2001-05.com.equallogic:0-8a0906-bc4a49907-3b4fb16b0b14c529-demo Initiator 21:00:00:e0:8b:88:b6:02 2-78 ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 103
Blocks 8192/8192 Request Blocks 8192/8192 Event Blocks 4096/4096 Control Blocks 1018/1024 Client Req Blocks 8192/8192 FCIP Buffer Pool 0/0 FCIP Request Blocks 0/0 FCIP NIC Buffer Pool 0/0 1K Buffer Pool 69632/69632 4K Buffer Pool 4096/4096 Sessions 4096/4096 Connections: GE1 256 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 104
2-Command Reference Command Syntax Show Mgmt Displays the blade's management port (10/100) configuration. Authority None Syntax show mgmt Examples The following example shows the show mgmt command: iSR6200 (admin) #> show mgmt Management Port Information IPv4 Interface Enabled IPv4 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 105
2-Command Reference Command Syntax Show NTP Displays the router's network time protocol (NTP) configuration. Authority None Syntax show ntp Examples The following example shows the show ntp command: iSR6200 #> show ntp NTP Information Mode Status TimeZone Offset (Hours) Disabled - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 106
write performance. Examples The following examples show the show perf command: iSR6200 #> show perf WARNING: Valid data is only displayed for port(s) that are not associated with any configured FCIP routes. Port Number -----GE1 GE2 GE3 GE4 FC1 FC2 Bytes/s (init_r) -------8M 0 0 0 7M 0 Bytes - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 107
0 17M 0 0 0 16M 0 0 17M 0 0 0 15M 0 0 17M 0 0 0 16M 0 0 iSR6200 #> show perf init_rbyte WARNING: Valid data is only displayed for port(s) that are not associated with any configured FCIP routes. Displaying bytes/sec (initiator mode read)... (Press any key to stop display - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 108
2-Command Reference Command Syntax iSR6200 #> show perf tgt_wbyte WARNING: Valid data is only displayed for port(s) that are not associated with any configured FCIP routes. Displaying bytes/sec (target mode write)... (Press any key ato stop display) GE1 GE2 GE3 GE4 FC1 FC2 0 0 0 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 109
examples show the show portstats fc command: iSR6200 #> show portstats fc 1 mins 10 This will display monitoring statistics of FC Port 1 for last 10 minute(s). Statistics are displayed in reverse order. If the router has been rebooted recently, the statistics are displayed starting from the last - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 110
6 6 0 0 0 0 0 0 11:39:48 336 288 6 6 0 0 0 0 0 0 11:38:48 604 524 10 10 0 0 0 0 0 0 11:37:48 336 288 6 6 0 0 0 0 0 0 11:36:48 336 288 6 6 (s). Statistics are displayed in reverse order. If the router has been rebooted recently, the statistics are displayed starting - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 111
show the show portstats gige command: iSR6200 #> show portstats gige 1 mins 10 This will display monitoring statistics of GE Port 1 for last 10 minute(s). Statistics are displayed in reverse order. If the router has been rebooted recently, the statistics are displayed starting from the last - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 112
2-Command Reference Command Syntax TCP retransmitted packets (ReTxPkt), Number of TCP Connection drops (ConnDrop) Current Date 12/21/2010 TimeStamp TxByte RxByte TxPkt RxPkt MaxRTT MinRTT ReTxPkt ConnDrop 13:04:48 5M 6M 28K 33K 40 0 0 0 12:04:48 5M 6M 30K 34K 40 0 0 0 2-88 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 113
Targets Displays targets presented by the router: Fibre Channel, iSCSI, or both. Authority None Syntax show presented_targets fc iscsi Keywords fc Specifies the display of Fibre Channel presented targets. iscsi Specifies the display of iSCSI presented targets. Examples The following example - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 114
The following example shows the show presented_targets iscsi command: iSR6200 #> show presented_targets iscsi Presented Target Information iSCSI Presented Targets Name iqn.2000-04.com.qlogic:iSR6200:0.50001fe150069d20.50001fe150069d2c IP 10.3.5.66 CHAP Disabled WWNN 50 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 115
2-Command Reference Command Syntax WWPN 50:00:1f:e1:50:01:11:58 Name iqn.2000-04.com.qlogic:iSR6200:1.50001fe150011150.50001fe150011158 IP 10.3.5.67 CHAP Disabled WWNN 50:00:1f:e1:50:01:11:50 WWPN 50:00:1f:e1:50:01:11:58 ISR654601-00 D 2-91 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 116
2-Command Reference Command Syntax Show Properties Displays the router blade CLI properties. Authority None Syntax show properties Examples The following example shows the show properties command: iSR6200 #> show properties CLI Properties Inactivty Timer Prompt String - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 117
Syntax Show SNMP Displays the router's simple network management protocol (SNMP) and any configured traps. Authority None Syntax show snmp Examples The following example shows the show snmp command: iSR6200 (admin) #> show snmp SNMP Configuration Read Community Trap Community System - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 118
2-Command Reference Command Syntax Show Stats Displays the blade statistics for Fibre Channel and iSCSI. Authority None Syntax show stats Examples The following example shows the show stats command: iSR6200 #> show stats FC Port Statistics FC Port 1 Interrupt Count 23 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 119
Length Errors Large MAC Rcvd Small Errors Small MAC Rcvd Multicast Frames MAC Rcvd Broadcast Frames 0 42061498217 60362392962831 0 0 0 0 0 0 0 0 0 0 1 0 34394 33144 iSCSI Port Interrupt Count Target Command Count Initiator Command Count MAC Xmit Frames MAC Xmit Byte Count MAC Xmit Multicast Frames - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 120
Small 0 MAC Rcvd Multicast Frames 94 MAC Rcvd Broadcast Frames 91 iSCSI Shared Statistics PDUs Xmited Data Bytes Xmited PDUs Rcvd Data Bytes Rcvd I/O Completed Unexpected I/O Rcvd iSCSI Format Errors Header Digest Errors Data Digest Errors Sequence Errors PDU Xmit Count PDU Xmit Count PDU - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 121
Pure Acks TCP Rcvd Segment Errors TCP Rcvd Segment Out of Order TCP Rcvd Window Probes TCP Rcvd Window Updates TCP ECC Error Corections FCIP Link Statistics FCIP Link FC Xmit Frames FC Xmit Bytes FC Rcvd Frames FC Rcvd Bytes IP Xmit Packets IP Xmit Byte Count IP Xmit Fragments IP - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 122
2-Command Reference Command Syntax TCP ECC Error Corections MAC Xmit Frames MAC Xmit Bytes MAC Xmit Multicast Count MAC Xmit Broadcast Count MAC Xmit Pause Count MAC Xmit Control Frames MAC Xmit Deferrals MAC Xmit Late Collisions MAC Xmit Aborted MAC Xmit Multiple Collisions MAC Xmit Single - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 123
Reference Command Syntax Show Statsfcip Displays the blade statistics specific to FCIP routes. Authority None Syntax show statsfcip Examples The following example shows the show statsfcip command: iSR6200 #> show statsfcip FCIP Link Statistics FCIP Link FC Xmit Frames FC Xmit Bytes - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 124
2-Command Reference Command Syntax MAC Xmit Pause Count MAC Xmit Control Frames MAC Xmit Deferrals MAC Xmit Late Collisions MAC Xmit Aborted MAC Xmit Multiple Collisions MAC Xmit Single Collisions MAC Xmit Collisions MAC Xmit Dropped Frames MAC Xmit Jumbo Frames MAC Rcvd Frames MAC Rcvd Bytes MAC - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 125
Syntax Show System Displays blade product information, including the serial number, hardware and software versions, port quantities Version No. of FC Ports No. of iSCSI Ports Log Level Telnet SSH FTP Temp (Front/Rear/CPU1/CPU2) Uptime iSR6200 Blade-1 Auto Enabled Disabled Enabled 0 0834E00013 20694 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 126
router: Fibre Channel, iSCSI, or both. Authority None Syntax show targets fc scsi Keywords fc Specifies the display of Fibre Channel targets. iscsi Specifies the display of iSCSI 31 State Online WWNN WWPN Port ID State 20:00:00:14:c3:44:9b:86 22:00:00:14:c3:44:9b:86 01-02-32 Online WWNN - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 127
The following example shows the show targets iscsi command: iSR6200 #> show targets iscsi Target Information iSCSI Name iqn.2001-05.com.equallogic:0-8a0906-bc4a49907-3b4fb16b0b14c529-demo Alias State Online IP Address 10.3.5.2 (Logged In --> GE1) iSCSI Name iqn.2001-05.com.equallogic - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 128
2-Command Reference Command Syntax Show VPGroups Displays information about the blade's configured virtual port groups. Authority None Syntax show vpgroups [vp index] Keywords vp index The number (1-4) of the virtual port group to be displayed. Examples The - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 129
Status WWPNs Index VpGroup Name Status WWPNs 2-Command Reference Command Syntax Enabled 21:02:00:c0:dd:13:16:f8 21:02:00:c0:dd:13:16:f9 4 VPGROUP_4 Enabled 21:03:00:c0:dd:13:16:f8 21:03:00:c0:dd:13:16:f9 ISR654601-00 D 2-105 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 130
2-Command Reference Command Syntax Shutdown Shuts down the blade. Authority Admin session Syntax shutdown Examples The following example shows the shutdown command: iSR6200 (admin) #> shutdown Are you sure you want to shutdown the System (y/n): n Command aborted. 2-106 ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 131
Command Syntax Target Removes an offline target from the blade's database. Typically, you will use this command to remove targets from the database that are no longer connected to the router. NOTE: The target add command is not currently supported. Authority Admin session Syntax target add rm - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 132
packet takes to reach the destination specified by the user. Authority Admin session Syntax traceroute Examples The following 35.14.17 over a maximum of 30 hops: 1 172.17.136.2 2 10.7.9.5 3 172.21.130.233 4 172.21.4.245 5 172.21.4.246 6 10.35.9.1 7 172.35.14.17 0.4ms 1.1ms 2.7ms 291.4ms 413. - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 133
. The algorithm increases the ID value with each CHAP dialog to protect against replay attacks. This chapter provides the procedures for configuring CHAP from the command line interface (CLI), including: "Discovery Session-Bi-directional CHAP" on page 3-2 "Discovery Session-Uni-directional CHAP" on - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 134
(BiDi) CHAP used during a discovery session. To configure a BiDi CHAP in a discovery session: 1. On the router, follow these steps: a. Enable CHAP on the port. b. Create a secret (for example, secret_port). c. Using the set chap command, choose the iSCSI node that represents the GE port. d. To find - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 135
MS Initiator. 4. Click Discovery. 5. Click Add. 6. Type the address of the iSCSI port of the router. 7. Click Advanced. 8. Select Chap Login Information. 9. In Target Secret, type the secret (secret_initiator) you created in Step 2. 10. Click OK. 11. Click OK. The initiator completes the discovery - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 136
configure a bi-directional (BiDi) CHAP used during a normal session. To configure BiDi CHAP in a normal session: 1. On the router If this is the first time you are setting secrets, reset all the secrets. d. Type the secret (secret_target) Mutual Authentication. 10. Click OK. 11. Click OK. - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 137
-Uni-directional CHAP Follow this procedure to configure a uni-directional CHAP used during a normal session. To configure uni-directional CHAP in a normal session (secret_initiator) that you created in Step 2. 9. Click OK. 10. Click OK. The initiator completes the normal login. ISR654601-00 D 3-5 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 138
3-Configuring CHAP Normal Session-Uni-directional CHAP 3-6 ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 139
iSR6200 blade supports up to four virtual port groups (VPGs). If you want your iSCSI hosts to have access to a total of more than 256 distinct LUNS from a specified Fibre Channel target array, you must enable and configure additional virtual port groups. Each blade has VPG 1 enabled by default; VPG - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 140
4-Virtual Port Groups Displaying Virtual Port Groups Displaying Virtual Port Groups To display virtual port group information, use the show vpgroups command in the CLI. For example: iSR6200 (admin) #> show vpgroups VpGroup Information Index VpGroup Name Status WWPNs 1 VPGROUP_1 Enabled 21:00 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 141
groups on your blade using the set vpgroups command. The following example shows how to enable virtual port groups 2 and 3. iSR6200 (admin) #> set vpgroups The following wizard will query for attributes before persisting and activating the updated mapping in the system configuration. If you - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 142
Port Groups The following example shows the output from the CLI for an iSR6200 blade with three virtual port groups enabled. You can display information about the virtual port groups configured on your iSR6200 with the show vpgroups command: iSR6200 (admin) #> show vpgroups VpGroup Information - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 143
Mode Link Status Current Link Rate Programmed Link Rate WWNN WWPN Port ID WWNN WWPN Port ID WWNN WWPN Port ID WWNN WWPN Port ID Firmware Revision No. Frame Size Execution Throttle Connection Mode SFP Type FC1 Enabled FCP Up 4Gb Auto 20:00:00:c0:dd:13:17:e8 (VPGROUP_1 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 144
Throttle Connection Mode SFP Type FC Port Port Status Port Mode Link Status Current Link Rate Programmed Link Rate WWNN WWPN Port ID Firmware Revision No. Frame Size Execution Throttle Connection Mode SFP Type Enode MAC Address Fabric Provided MAC Address VlanId Priority Level Priority GroupId - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 145
4-Virtual Port Groups Enabling Virtual Port Groups Programmed Link Rate WWNN WWPN Port ID Firmware Revision No. Frame Size Execution Throttle Connection Mode SFP Type Enode MAC Address Fabric Provided MAC Address VlanId Priority Level Priority GroupId Priority GroupPercentage Auto - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 146
4-Virtual Port Groups Enabling Virtual Port Groups 4-8 ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 147
instructions for connecting Fibre Channel hosts to iSCSI targets using the QLogic iSR6240 and iSR6250 routers. These routers are collectively referred to as the iSR6200 throughout this chapter. Prerequisites Before connecting the Fibre Channel hosts to the iSCSI targets: 1. Configure the router - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 148
Fibre Channel Initiators to iSCSI Storage Configuration Overview Step 1: Discover the iSCSI Targets There are two ways to discover the iSCSI targets: Using the iSCSI Discover Command Using iSNS Server Connectivity Using the iSCSI Discover Command 1. Issue the show targets command. For example - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 149
iSNS Server Connectivity 1. Allow the iSCSI storage access to the iSNS server iSCSI port and router iSCSI ports. This access can be either IP based or iqn based. See your iSCSI storage documentation for access control information. 2. Configure the iSCSI ports on the router in the same domain as the - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 150
5-Configuring Fibre Channel Initiators to iSCSI Storage Configuration Overview Figure 5-1. iSNS Server Properties: Creating a Discovery Domain 5-4 ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 151
Fibre Channel Initiators to iSCSI Storage Configuration Overview d. Add this discovery domain to a set, and then enable this discovery domain set, as shown in Figure 5-2. Figure 5-2. iSNS Server Properties: Enabling a Discovery Domain - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 152
Digest (0=Enable, 1=Disable) [Disabled ] iSCSI Login for selected target was successful To stop this process before reaching the end of the list, press the Q+ENTER keys. Step 3: Zone the Fibre Channel Host and iSR6200 Router Get the following information to configure the iSR6200 to the Fibre - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 153
Host with Router-Fibre Channel-Based Ports Fibre Channel Switch and IP Address Fibre Channel Zone Name Zone Members (WWPNs) Server, iSR6200, Storage Name Figure 5-3 shows a zone configured with the router to see the targets. Figure 5-3. Zone Configured with Router Step 4: Map the iSCSI Target - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 154
Fibre Channel Initiators to iSCSI Storage Configuration Overview 1. Issue the show initiators command. For example: iSR6200 follow the prompts. For example: iSR6200 (admin) #> lunmask add Index Type Mapped (WWNN,WWPN/iSCSI Name) 0 FC No 20:00:00:1b:32:9a:e7:5c,21:00:00:1b:32:9a:e7 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 155
Fibre Channel Initiators to iSCSI Storage Configuration Overview Please select a portal to map the Zoned to the Fibre Channel Host This step identifies the mapping between an iSCSI target and a Fibre Channel or FCoE presented target. This step determines the correct Fibre Channel device to zone - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 156
mapped target is configured with the iSR6200 router to the Fibre Channel SAN. Figure 5-4. iSCSI Configured with Router to Fibre Channel SAN #> show perf byte WARNING: Valid data is only displayed for port(s) that are not associated with any configured FCIP routes. Displaying bytes/sec (total)... - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 157
SNMP. The router firmware supports SNMP versions 1 and 2, and a QLogic management information base (MIB) (see page A-4). You may format traps using SNMP version 1 or 2. This appendix provides the following SNMP information for the iSR6200: "SNMP Parameters" on page A-2 "SNMP Trap Configuration" on - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 158
and the SNMP management server must be the same. The trap community password can be up to 32 characters, excluding the number sign (#), semicolon (;), and comma (,). The default password is private. Specifies the name of the router location. The name can be up to 64 characters, excluding the number - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 159
configured. Trap address* Specifies the IP address to which the SNMP traps are sent. A maximum of eight trap addresses are supported. The default is sent. The default is 162. If the trap destination is not enabled, this value is 0 (zero). Most SNMP managers and management software listen on this - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 160
Management Information Base (MIB) Management Information Base (MIB) This section describes the QLogic MIB. The Installation Guide. qsrNwPortTable Syntax SEQUENCE OF QsrNwPortEntry Access Not accessible Description Entries in this table include the management port, and the iSCSI ports on the router - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 161
A-Simple Network Management Protocol Management Information Base (MIB) A network port entry includes the following QsrPortRole Not accessible Operational role of this port: management port or iSCSI port. qsrNwPortIndex Syntax Access Description Unsigned32 Not accessible A positive integer - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 162
A-Simple Network Management Protocol Management Information Base (MIB) qsrIPAddressType Syntax InetAddressType Access Read-only Description IP address type: ipv4 or ipv6. qsrIPAddress Syntax Access Description InetAddress Read-only IP address of the - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 163
A-Simple Network Management Protocol Management Information Base (MIB) qsrNwLinkRate Syntax Access Description QsrLinkRate Read-only Operational link rate for this port. Fibre Channel Port Table This table contains a list of the Fibre Channel (FC) ports on the router. There are as many entries in - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 164
A-Simple Network Management Protocol Management Information Base (MIB) qsrFcPortRole Syntax Access Description QsrPortRole Not accessible Operational role of this port: Fibre Channel protocol (FCP) mode or frame shuttle mode. qsrFcPortIndex Syntax Access - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 165
A-Simple Network Management Protocol Management Information Base (MIB) qsrFcPortType Syntax Access Description Unsigned32 Read- of the iSCSI initiators that have been discovered by the router. There are as many entries in this table as there are iSCSI initiators on the router. qsrIsInitTable Syntax - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 166
denoting each iSCSI initiator discovered by the router. qsrIsInitName OBJECT-TYPE Syntax SnmpAdminString Access Not accessible Description iSCSI name of the initiator. qsrIsInitAlias OBJECT-TYPE Syntax SnmpAdminString Access Read-only Description Alias for the iSCSI initiator. A-10 ISR654601-00 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 167
initiator, that is, whether or not it is logged in to the router. qsrIsInitOsType Syntax Access Description SnmpAdminString Read-only The type of the iSCSI initiator's operating system. qsrIsInitChapEnabled Syntax Integer: 0 = enabled; 2 = disabled Access Read-only Description A value indicating - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 168
in this table as there are Fibre Channel targets on the router. qsrLunEntry Syntax Access Description QsrLunEntry Not accessible Each entry (row) contains information about a specific LUN. This table extends scsiDscLunTable in QLOGIC-SCSI-MIB. The entries in this table show other attributes of - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 169
A-Simple Network Management Protocol Management Information Base (MIB) qsrLunVendorId Syntax Access Description SnmpAdminString Read-only Vendor ID for Size of the LUN (in megabytes). qsrLunState Syntax Access Description Integer 1 = online, 2 = offline, 3 = reserved Read-only State of the LUN - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 170
A-Simple Network Management Protocol Management Information Base (MIB) qsrLunVPGroupid Syntax Integer Access Read-only Description ID of the virtual port group to which this LUN belongs. qsrLunVPGroupname OBJECT-TYPE Syntax SnmpAdminString Access - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 171
A-Simple Network Management Protocol Management Information Base (MIB) The QsrVPGroupEntry contains the following sequence of objects: qsrVPGroupIndex qsrVPGroupId qsrVPGroupName qsrVPGroupWWNN qsrVPGroupWWPN qsrVPGroupStatus Unsigned32, INTEGER, SnmpAdminString, VpGroupWwnnAndWwpn, - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 172
A-Simple Network Management Protocol Management Information Base (MIB) qsrVPGroupWWPN OBJECT-TYPE Syntax VpGroupWwnnAndWwpn Access Read-only disabled) Sensor Table The sensor table lists all the sensors on the router. Each table row specifies a single sensor. qsrSensorTable Syntax SEQUENCE OF - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 173
A-Simple Network Management Protocol Management Information Base (MIB) A sensor entry contains the following sequence of objects Syntax Access Description INTEGER Temperature = 1 Not accessible Type of data being measured by this sensor. qsrSensorIndex Syntax Access Description Unsigned32 Not - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 174
A-Simple Network Management Protocol Management Information Base (MIB) qsrUpperThreshold Syntax Integer32 Access Read-only Description Upper-level threshold for this sensor. qsrLowerThreshold Syntax Integer32 Access Read-only Description Lower-level threshold for - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 175
FCIP Route Notification" on page A-25 NOTE: Every notification uses qsrBladeSlot as one of the objects. This determines the originator blade for the same notification. System Information Objects The system information objects provide the system serial number, version numbers (hardware, software - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 176
A-Simple Network Management Protocol Notifications qsrSwVersion Syntax Access Description SnmpAdminString Read-only System software (firmware) version number. qsrNoOfFcPorts Syntax Access Description Unsigned32 Read-only Quantity of Fibre Channel ports on the system. qsrNoOfGbEPorts Syntax - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 177
Notification The agent startup notification indicates that the agent on the router has started running. qsrAgentStartup uses the following object: qsrEventTimeStamp Agent are sent for the following events: Management port: down or up iSCSI port: down or up Port number (1-4) ISR654601-00 D A-21 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 178
device discovery notifications are sent for the following event: Fibre Channel Target State: Discovered, went offline, or went online Target WWPN Blade number (1 or 2) Target Presentation (Mapping) The target presentation notification indicates that the specified target has been presented (mapped - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 179
A-Simple Network Management Protocol Notifications Target Presentation State: Presented (mapped) or unpresented (unmapped) Target name Blade number (1 or 2) Virtual Port Group Notification The virtual port group notification indicates that the specified virtual port group is enabled or disabled. It - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 180
number (1 or 2) (PCM) installed PCM number (1 or 2) PCM removed PCM number (1 or 2) PCM powered (AC power connected) PCM number (1 or 2) PCM un-powered (AC power removed) PCM number (1 or Channel port configuration change Blade number (1 or 2) Port number (1 of 4) iSCSI port configuration change A- - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 181
4) iSNS configuration change Blade number (1 or 2) NTP configuration change Blade number (1 or 2) Router configuration change Blade number (1 or 2) Management port configuration change Blade number (1 or 2) Firmware upgrade complete Blade number (1 or 2) Reboot blade Blade number (1 or 2) FCIP Route - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 182
A-Simple Network Management Protocol Notifications A-26 ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 183
message text shown in the CLI or SANsurfer Router Manager router log. Note that: Log messages for the iSCSI driver module are common to both iSCSI ports. Log messages beginning with #0 denote iSCSI port 1 (GE1) and log messages beginning with #1 denote iSCSI port 2 (GE2). Log messages for the Fibre - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 184
B-Log Messages NIC = FCIP NIC module System = System module User = User module The Msg. Type column specifies the log message type, where: . Table B-1. iSR6200 Router Log Messages ID Log Message Module Msg. Type Type Description 40967 QLBA_NullDoorbell: driver unloaded, port disabled 40996 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 185
not configured for Portal App Error iSCSI target login was attempted to a portal (iSCSI1 or iSCSI2) on which the target is not presented. 41267 QLIS_LoginPduContinue: Target not found. Target name: App Error iSCSI Login PDU received for a target with a target name unknown to the router - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 186
initiator attempting the login failed to used the TSIH value provided in the Target Login Response PDU (router is target) in subsequent login PDUs. App Error iSCSI Login PDU was received with an invalid TSIH value. The TSIH is invalid because there is no ses- sion with that TSIH value. This - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 187
= iSCSI PortId: 0 = FC1 or iSCSI1(GE1), 1 = FC2 or iSCSI2 (GE2) App Error Inquiry command failed. The Inquiry command was issued by the router as by management tool (such as GUI) was aborted. App Error Pass-Through command issued by management tool (such as GUI) failed due to invalid command - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 188
Router Log Messages (Continued) ID Log Message Module Msg. Type Type Description 41717 41750 41768 QLBI_Passthru: Invalid data length %d bytes QLBI_Ioctl: ERROR: Operation (0x%x) not supported 0x%x not configured 42002 QLFC_Login: Can management tool (such as GUI) was interrupted or timed - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 189
Fibre Channel VP index that has not been configured. Operation attempted on an unconfigured VP. Event notification; Fibre Channel processor encountered a system error (unrecoverable firmware error). Event notification; Fibre Channel driver encountered a fatal error. Event notification; Fibre Channel - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 190
B-Log Messages Table B-1. iSR6200 Router Log Messages (Continued) ID Log Message Module Msg. Type Type Description 42649 QLIS_HandleTeb: Unload Driver App Error Event notification; an IOCTL request was received to unload the iSCSI driver. 42654 QLIS_HandleTeb: iSNS Connection Failed App - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 191
B-Log Messages Table B-1. iSR6200 Router Log Messages (Continued) ID Log Message Module Msg. event notification, VP (virtual port) xx. Info iSCSI target connection opened for port %d, data description block (DDB) %d. Info Event notification; iSCSI open connection request. ISR654601-00 D B-9 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 192
Router 2x%.2x%.2x%.2x%.2x%.2x QLMP_CombineMPDevice: Virtual Target Online QLMP_CombineMPDevice: Node Name %.2x%.2x%.2x%.2x%.2x iSCSI close connection request or connection closed. App Info Event notification; iSCSI came online. App Info WWNN of the array that came online. This is tied with - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 193
being added with a LUN that is a controller LUN. Data LUNs are required for configuring migration jobs. Info Migration job being added for a LUN that is masked to an initiator on the router. Mapped LUNs cannot be used for offline migration jobs. Info Migration job being added for a LUN for which no - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 194
QLDisable: QLRebootTimer failed AF %x RS %x Time %d App App App iSCSI iSCSI iSCSI iSCSI iSCSI iSCSI iSCSI iSCSI Info Info Info Fatal The log shows the configured start time and current time for a delayed migration job. Failed to stop a migration job; the error message includes the job ID. Did not - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 195
Table B-1. iSR6200 Router Log Messages (Continued iSCSI iSCSI iSCSI iSCSI iSCSI iSCSI iSCSI iSCSI iSCSI iSCSI Fatal Port enable reboot timer failed. Fatal iSNS response contains an invalid handle. Fatal Start iSCSI processor failed. Fatal iSCSI processor firmware initialization failed. Fatal iSCSI - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 196
Initialize FW failed iSCSI iSCSI iSCSI iSCSI iSCSI iSCSI iSCSI iSCSI iSCSI iSCSI iSCSI iSCSI iSCSI Fatal Fatal Fatal Fatal Fatal Fatal Asynchronous event for unknown event type. Reboot timer failed. iSCSI driver missed iSCSI processor heartbeat. iSCSI processor rebooted. iSCSI processor failed to - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 197
B-Log Messages Table B-1. iSR6200 Router Log Messages (Continued) ID Log iSCSI processor reported a link down condition. Driver failed to receive a heartbeat from the iSCSI processor for the specified number of seconds. iSCSI processor (adapter) failed to provide a heartbeat for x seconds. iSCSI - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 198
Table B-1. iSR6200 Router Log Messages (Continued iSCSI processor was restarted. iSCSI processor rejected the firmware initialize command. Error Error Error Info Info Driver's initiator database is full. The driver is capable of storing 1024 iSCSI initiators in its database. Use the CLI or GUI - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 199
result to Bridge 102656 #%d: QLInitializeAdapter: Reset ISP failed 102657 #%d: QLInitializeAdapter: Load RISC code failed iSCSI iSCSI FC FC FC FC FC FC FC Info Link up reported by iSCSI processor for GE1 or GE 2. Info iSCSI controller reported a link speed/configuration of 100Mb full-duplex (FDX - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 200
B-Log Messages Table B-1. iSR6200 Router Log Messages (Continued) ID Log Message Module Msg. Type Type Description failed. 102662 #%d: QLInitializeAdapter: Verify Checksum FC Fatal Fibre Channel processor firmware checksum failed. command failed (%x) 102680 #%d: QLInitializeFW: FAILED FC - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 201
Messages Table B-1. iSR6200 Router Log Messages (Continued) ID driver. FC Error Fibre Channel processor firmware failed initialization. The request to initialize was received by the driver The mailbox registers provide status, event code, and data related to the event. FC Error Fibre Channel - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 202
B-Log Messages Table B-1. iSR6200 Router Log Messages (Continued) ID Log Message Module Msg. Type Type . This failure occurs only when the Fibre Channel processor is running multi-ID firmware. FC Error Driver was unable to re-establish connection to the target within the timeout and retry - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 203
State failed 0-3 %x %x %x %x FC Error Fibre Channel controller reported failure status for a Get Firmware State command. 118882 #%d: QLIoctlDisable: Reset adapter FC Info Request to reset the Fibre Channel processor (adapter) received from ioctl interface. 119088 #%d: QLIsrEventHandler: LIP - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 204
B-Log Messages Table B-1. iSR6200 Router Log Messages (Continued) ID Log FCoE protocol, the Data Center Bridging Exchange protocol completes. Info For FCoE protocol, the Inter-Driver Communication completes. Info For FCoE protocol, the IDC notification comes from another driver. Info For FCoE - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 205
Table B-1. iSR6200 Router Log Messages ( User User User User User User User User Info Info Info Error Error For FCoE protocol, the DCBX protocol has started. For FCoE protocol, the FCF configuration error occurred. For FCoE Error Get iSCSI API memory allocation failed. Error Get iSCSI advanced API - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 206
B-Log Messages Table B-1. iSR6200 Router Log Messages (Continued) ID Log Message Module Msg. Type Type Mem Allocation error 139289 QBRPC_Initialize:TgtDevice Mem Allocation error User User User User User User User User User User User Error Error Error Get Fibre Channel Advanced API memory - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 207
B-Log Messages Table B-1. iSR6200 Router Log Messages (Continued) ID Log Message Module Msg. Type allocation for Status API. User Error Failed memory allocation for TCP/IP Statistics API. User Error Failed memory allocation for NTP Status API. User User User Error Error Error Failed memory - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 208
Messages Table B-1. iSR6200 Router Log Messages (Continued) configuration to persistence FCIP route add/mod failed because an IP address supplied is already under use. FCIP route add/mod failed because FCIP license is not present. A firmware upgrade was performed; the new version is: d.d.d.d. User - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 209
Port status changed by user to DISABLED. User User User User User User User User User User User Info Fibre Channel port configuration has changed. Info iSCSI port configuration has changed. Info iSNS configuration has changed. Info NTP configuration has changed. Info VLAN configuration has changed - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 210
Removed 152096 qapisetmigrfctargets_1_svc: Configuration Changed for migration target 152099 LogMigration: Error in Writting log file User User User User App App App User User User User Info Fibre Channel port %d was enabled by user. Info Fibre Channel port %d was disabled by user. Info Target at - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 211
indicates a job with priority 1 configured. Info Completed readjusting the serial schedule priority of migration jobs. Info An update migration action [Start/Stop/Pause/Resume] has failed. Info Failed to remove a migration job with ID specified in the log. Info Reset the serial schedule delayed time - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 212
%dC CPU1: %dC CPU2: %dC 152142 sysTempMon: Setting the fan speed to high 152143 sysTempMon: Setting the fan speed to normal User User User User User User User Info Left power and cooling module (PCM) is or has been installed. Info Left PCM is or has been uninstalled. Info Right PCM is or has been - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 213
Remote Peer Disconnected 172247 FcipRoute#%d: Failed to send FC Up/Down 172249 FcipRoute#%d: FCIP Link Down 172250 FcipRoute#%d: TCP Link Down User User FCIP FCIP FCIP FCIP Info Info Error Error Error Error Router temperature has returned to normal operating range, Front: %dC Rear: %dC CPU1: %dC - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 214
B-Log Messages Table B-1. iSR6200 Router Log Messages (Continued) ID Log Message Module Msg. Type Type =%d TCP Total ReTransmitted=%d FCIP Error FCIP route #n: Received connection from unauthorized remote peer. FCIP FCIP FCIP FCIP FCIP Error Error Error Error Error FCIP route #n is not - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 215
on the remote peer went down. TCP link for FCIP route #n has been established. FCIP link is up for FCIP route #n. FCIP route #n: Incorrect VLAN configuration. Ethernet port was not able to negotiate the configured speed. Ethernet port speed is not supported. NIC Error Ethernet device could not be - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 216
register the interrupt handler failed. Failed class_simple_create system call from memory monitor initialization routine. Failed to kill system task. Router temperature has exceeded the high temperature threshold. Router temperature has returned to the normal operating range. B-34 ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 217
or a Web browser and Web server. A challenge/response is a security mechanism for verifying the identity of a person or process without revealing a secret password that is shared by the two entities. Also referred to as a" three-way handshake." command line interface See CLI. CLI Program interface - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 218
(CLI) User's Guide device A target, typically a disk drive. Hardware such as a disk drive, tape drive, printer, or keyboard that is installed in or connected to a system. In Fibre Channel, a target device. driver The software that interfaces between the file system and a physical data storage - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 219
iSR6200 Command Line Interface (CLI) User's Guide Fibre Channel over Ethernet See FCoE. Fibre Channel over IP See FCIP. field replaceable unit See FRU. Flash Non-volatile memory where the boot code is saved. At times, flash and boot code are used interchangeably. Flash - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 220
(CLI) User's Guide IP address Internet protocol address. The numeric address of a computer that is in the format used on the internet. iSCSI Internet small computer system interface. Protocol that encapsulates data into IP packets to send over Ethernet connections. iSNS Internet simple name service - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 221
networks. NVRAM Non-volatile random access memory. A type of memory that retains data even when power is removed. Holds configuration settings. You can configure NVRAM settings manually or restore them from a file. path A path to a device is a combination of a adapter port instance and a target - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 222
) and servers connected by networking topology. SANsurfer Router Manager Also know as SANsurfer iSCSI/FC Router Manager. A workstation-based router management tool that provides a graphical user interface (GUI) used to configure and monitor intelligent storage routers. Glossary-6 ISR654601-00 D - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 223
User's Guide SCSI Small computer system interface. A high-speed interface used to connect devices, such as hard enables you to monitor the router using third-party applications that services. storage area network See SAN. target The storage-device endpoint of a SCSI session. Initiators request data - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 224
User's Guide VPG Virtual port group (or VPGROUP). Software component configured in the iSCSI router that is used to create virtual adapters on all Fibre Channel ports on a blade page 83 and page 80 of your SCSI block device as based on the SCSI standard. SANsurfer looks for identifiers in the order - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 225
Glossary-1 adding FCIP route 2-12 password, changing 2-30 session, closing and opening 2-6 session, requirements for 2-5 agent shutdown notification A-21 software version number A-20 startup notification A-21 agreements, license configuration data 1-5 blade command 2-8 C capturing debug dump data - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 226
iSR6200 Command Line Interface (CLI) User's Guide CHAP authentication error B-4 configuration, displaying 2-58 configuring 3-1 definition of Glossary-1 description of 3-1 key error B-4 router parameters, configuring 2-41 chassis commands, list of 2-2 information and status, showing 2-59 prompt 2-8 - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 227
, adding, changing, removing 2-23 targets, removing from 2-107 date command 2-10 date, event A-21 date, showing and setting 2-10 debug dump data, capturing 2-35 debug file, creating 2-35 defaults (factory), resetting 2-34 definitions of terms Glossary-1 deleting, See removing destinations (trap - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 228
features licensed, showing 2-63 setting 2-44 Fibre Channel, definition of Glossary-2 Fibre Channel initiators, configuring to iSCSI storage 5-1 Fibre Channel over Ethernet, See FCoE Fibre Channel over IP, See FCIP Fibre Channel targets, showing 2-102 field replaceable unit, See FRU firmware image - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 229
iSR6200 Command Line Interface (CLI) User's Guide fru command 2-16 fru restore command 1-6 FTP firmware image, transferring to router 1-6 saving router configuration and persistence 1-4 transferring data to router 1-5 G gateway, port A-6 GE ports pinging 2-31 showing A-4, A-20 generic notifications - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 230
Interface (CLI) User's Guide IPv4 port type A-6 IPv6 port type A-6 iSCSI, definition of Glossary-4 iSCSI nodes, CHAP configuration for 2-58 iSCSI ports configuring 2-45 information, showing 2-67 iSNS information, showing 2-71 parameters, configuring 2-37 iSCSI storage, configuring FC initiators to - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 231
, showing 2-81 definition of Glossary-5 disabling before setting date 2-10 parameters, configuring 2-49 NVRAM definition of Glossary-5 iSCSI port contains invalid data B-15 iSCSI processor failed diagnostic B-12 iSCSI processor invalid B-14 reboot timer failed B-12 O object table, initiator - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 232
A-19 online/offline targets A-22 opening, administrator session 2-6 operational information, showing 2-55 P parameters NTP, configuring 2-49 router, configuring 2-37 SNMP A-2 system, configuring 2-53 passwd (password) command 2-30 passwords changing 2-30 guest account 1-2 SNMP default A-2 path - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 233
iSR6200 Command Line Interface (CLI) User's Guide properties blade, setting 2-50 blade, showing 2-92 Q QLogic, technical support xiv qsrAgentShutdown notification A-21 qsrAgentStartup notification A-21 qsrAgentVersion object A-20 qsrDscTgtStatusChanged notification A-22 qsrEventDescription object - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 234
log entries 2-9 requirements, authority 2-5 reset factory command 2-34 reset mappings command 2-34 resetting FC and iSCSI stat counters 2-9 router parameters to default 2-34 restarting router firmware 2-33 restoring persistent data 1-5 router configuration 1-5, 2-16 RISC definition of Glossary - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 235
command 2-102 show vpgroups command 2-104, 4-2 showing chassis info and status 2-59 command history 2-21 commands and syntax 2-17 date and time 2-10 FC port information 2-61 FCIP route configuration 2-62 initiators 2-64 initiators LUN mask 2-66 iSCSI port information 2-67 LUN information 2-73 LUN - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 236
trap configuration A-3 software version, showing 2-101, A-20 SSH definition of Glossary-7 logging on to router with 1-1 startup notification, agent A-21 statistics counters, resetting 2-9 FC and iSCSI, showing 2-94 Fibre Channel port, showing 2-85 GbE port, showing 2-85 statistics, showing for blade - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 237
2-51 troubleshooting QLogic knowledge database xv typographic conventions xiii U uni-directional CHAP discovery session, configuring for 3-3 normal session, configuring for 3-5 unpacking firmware image file 2-22 UP ARROW key, using 2-4 updating blade with saved configuration data 1-5 firmware image - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 238
User's Guide V verifying connectivity (ping command) 2-31 version number hardware, showing A-19 hardware/software, showing 2-101 software/firmware VLAN configuration change message B-27 definition of Glossary-7 enabling/disabling 2-45 VPGs, See virtual port groups W what's in this guide xi - HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 239
- HP MPX200 | QLogic iSR6200 Command Line Interface (CLI) User's Guide (ISR654601- - Page 240
Corporation. Specifications are subject to change without notice. All rights reserved worldwide. QLogic and the QLogic logo are registered trademarks of QLogic Corporation. Linux is a registered trademark of Linus Torvalds. Microsoft and Windows are registered trademarks of Microsoft Corporation
ISR654601-00
D
iSR6200
Command Line Interface (CLI)
User’s Guide