HP MSA 1040 HP MSA 1040 Quick Start Instructions (759126-001, March 2014)
HP MSA 1040 Manual
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP MSA 1040 manual content summary:
- HP MSA 1040 | HP MSA 1040 Quick Start Instructions (759126-001, March 2014) - Page 1
HP MSA 1040 Quick Start Instructions Abstract These instructions provide an overview of planning, installation, and configuration steps. This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes that you are qualified in servicing and - HP MSA 1040 | HP MSA 1040 Quick Start Instructions (759126-001, March 2014) - Page 2
following documents: • HP MSA 1040 QuickSpecs • HP MSA 1040 User Guide • HP MSA 1040 Cable Configuration Guide • HP MSA 1040 SMU Reference Guide Confirm support for your hardware and software components Confirm that the devices you plan to connect and their installed firmware and software versions - HP MSA 1040 | HP MSA 1040 Quick Start Instructions (759126-001, March 2014) - Page 3
from HP, see the HP MSA 1040 QuickSpecs. • The maximum number of enclosures supported in an MSA 1040 solution is four (one MSA 1040 and up to three expansion drive enclosures). Example MSA 1040 drive enclosure connections MSA 1040 firmware supports both fault-tolerant and straight-through SAS - HP MSA 1040 | HP MSA 1040 Quick Start Instructions (759126-001, March 2014) - Page 4
supports Remote Snap Software. These two MSA systems connect through FC or Ethernet switches that are on the same fabric or network. For more information about Remote Snap Software, including cabling requirements and user information, see the HP MSA 1040 User Guide, HP MSA 1040 SMU Reference Guide - HP MSA 1040 | HP MSA 1040 Quick Start Instructions (759126-001, March 2014) - Page 5
the firmware from the HP website and use the SMU to install the downloaded firmware. For information, see the HP MSA 1040 SMU Reference Guide. Step 8: Configure the MSA 1040 Key configuration steps include setting the system date and time, entering system parameters, configuring storage volumes, and
HP MSA 1040 Quick Start
Instructions
Abstract
These instructions provide an overview of planning,
installation, and configuration steps.
© Copyright 2014 Hewlett-Packard Development Company, L.P.
*759126-001*
HP Part Number: 759126-001
Published: March 2014
Edition: 1
This document is for the person who installs,
administers, and troubleshoots servers and storage
systems. HP assumes that you are qualified in servicing
and installing computer equipment, and are trained
in recognizing hazards in products and hazardous
energy levels.
Feature overview
The HP MSA 1040 is available in six models:
•
FC Dual Controller LFF Storage
•
FC Dual Controller SFF Storage
•
1G iSCSI Dual Controller LFF Storage
•
1G iSCSI Dual Controller SFF Storage
•
10G iSCSI Dual Controller LFF Storage
•
10G iSCSI Dual Controller SFF Storage
MSA 1040 front features (24, 2.5 inch drive)
2. Drive in slot 9
1. Left bezel ear
4. Heartbeat LED
3. Fault LED
6. Right bezel ear
5. Unit Identification LED
MSA 1040 front features (12, 3.5 inch drives)
2. Drive in slot 4
1. Left bezel ear
4. Heartbeat LED
3. Fault LED
6. Right bezel ear
5. Unit Identification LED
Page 1