HP MSA2324sa HP StorageWorks 2000 Family Modular Smart Array optional drive mo
HP MSA2324sa Manual
 |
View all HP MSA2324sa manuals
Add to My Manuals
Save this manual to your list of manuals |
HP MSA2324sa manual content summary:
- HP MSA2324sa | HP StorageWorks 2000 Family Modular Smart Array optional drive mo - Page 1
HP StorageWorks 2000 Family Modular Smart Array. NOTE: Make sure you obtain the latest version of these instructions from http://www.hp.com/go/msa. Select MSA SAN Arrays, select your product, and go to Support proper anti-static protection: • Keep the replacement component in the ESD bag until needed - HP MSA2324sa | HP StorageWorks 2000 Family Modular Smart Array optional drive mo - Page 2
Rotate the latch downward until the latch clicks closed. 3.5-inch air management modules 1. Follow the instructions above if your air management module has latch release buttons on both sides. Otherwise, press and slide . Additional information See the MSA web site: tap://www.hp.com/go/msa. Page 2
-
1 -
2
 |
 |
Page 1
486857-002
About this document
This document details procedures for installing an optional drive
module into an HP StorageWorks 2000 Family Modular Smart
Array.
NOTE:
Make sure you obtain the latest version of these
instructions from
. Select MSA SAN
Arrays, select your product, and go to Support.
Before you begin
CAUTION:
Removing an air management module impacts the
airflow and cooling ability of the device. To avoid possible
overheating, insert the new drive module as quickly as possible. If
the internal temperature exceeds acceptable limits, the enclosure
may overheat and automatically shut down or restart.
CAUTION:
Parts can be damaged by electrostatic discharge.
Use proper anti-static protection:
•
Keep the replacement component in the ESD bag until needed.
•
Wear an ESD wrist strap grounded to an unpainted surface of
the chassis.
•
If an ESD wrist strap is unavailable, touch an unpainted surface
of the chassis before handling the component.
•
Never touch connector pins.
Removing air management modules
2.5-inch air management modules
1.
Squeeze the top and bottom latch release buttons to disengage
the module.
Printed on at least 50% total recycled fiber with at least 10%
post-consumer paper
© Copyright 2008 Hewlett-Packard Development Company, L.P.
Second edition: November, 2008
Product names mentioned herein may be trademarks of their
respective companies as reflected by an associated footnote. The
information in this document is subject to change without notice.
Printed in China.
www.hp.com
HP StorageWorks
2000 Family Modular Smart
Array
optional drive module
installation instructions