HP Model 725/100 9GB disk drive user notes (a1658-90693)
HP Model 725/100 - Workstation Manual
 |
View all HP Model 725/100 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Model 725/100 manual content summary:
- HP Model 725/100 | 9GB disk drive user notes (a1658-90693) - Page 1
Notes Refer to your workstation owner's guide or your disk drive installation guide for detailed information about installing your PHKL_8906 PHKL_8908 Patches - Diags PHSS_7583 PHSS_7585 PHSS_7929 After you have loaded HP-UX onto the drive, install the appropriate patches using swinstall and - HP Model 725/100 | 9GB disk drive user notes (a1658-90693) - Page 2
.xx on the 9-GB drive, you may receive an HP-UX Install Utility Message Dialog with the following error reported your system has more than 64MB of system RAM increase the value for Maximum Physical Extents. The HP part numbers for this drive are A1658-60016 (spare) and A1658-69016 (exchange). J6 A0
-
1 -
2
 |
 |
9–GB Disk Drive
User Notes
Refer to your workstation owner’s guide or your disk drive installation
guide for detailed information about installing your disk drive. During
the installation procedure, you may have to change the SCSI ID of your
disk drive. Refer to the appropriate illustration to set the SCSI ID
jumpers to the desired SCSI ID.
NOTICE:
We recommend that you use SCSI ID 6 for your
workstation’s first hard disk drive, and SCSI ID
5 for the second hard disk drive.
Minimum
Software
Requirements
The 9–GB disk drive is fully operational with HP-UX Release 10.01 and
later on Series 700 binary–compatible systems.
The following patches are required to the operating system.
HP-UX
Version
Patches
– OS
Patches – Diags
10.01
PHKL_8904, PHKL_8329
PHSS_7583
10.10
PHKL_8906
PHSS_7585
10.20
PHKL_8908
PHSS_7929
After you have loaded HP-UX onto the drive, install the appropriate
patches using
swinstall
and reboot the system.
Part Number A1658–90693
Edition E1
196
Printed in U.S.A.
*A1658-90693*