HP Model 725/100 ultra wide single-ended 2GB, 4GB, 9GB disk drive user notes (
HP Model 725/100 - Workstation Manual
View all HP Model 725/100 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Model 725/100 manual content summary:
- HP Model 725/100 | ultra wide single-ended 2GB, 4GB, 9GB disk drive user notes ( - Page 1
User Notes Refer to your workstation owner's guide or your disk drive installation guide for detailed information about installing your disk drive ACE (February 1998 or later). No additional software patches are required. The HP part numbers for these drives are: Drive 2-GB 4-GB 9-GB Exchange - HP Model 725/100 | ultra wide single-ended 2GB, 4GB, 9GB disk drive user notes ( - Page 2
J6 LM SS Highest SCSI B B J2 Priority ID 6 5 Term Power From Drive 4 3 2 1 0 CAUTION 15 DoNOTuse the jumper 14 plugs for J2 on J6. You will damage the 13 internal contacts 12 11 10 9 Lowest Priority 8 Seagate ST34371W, ST34572W Disk Drive Jumpers (4GB) Seagate ST32171W,
2–GB, 4–GB and 9–GB Ultra
Wide SE Disk Drive User Notes
Refer to your workstation owner’s guide or your disk drive installation
guide for detailed information about installing your disk drive. During
the installation procedure, you may have to change the SCSI ID of your
disk drive. Refer to the appropriate illustration to set the SCSI ID
jumpers to the desired SCSI ID.
NOTICE:
We recommend that you use SCSI ID 6 for your
workstation’s first hard disk drive, and SCSI ID
5 for the second hard disk drive.
Minimum Software Requirements
The 2–GB, 4–GB, and 9–GB disk drives are fully operational with HP-
UX Release 10.20 ACE (February 1998 or later). No additional software
patches are required.
The HP part numbers for these drives are:
Drive
Exchange Part No.
Spare Part No.
2–GB
A1658–69020
A1658–60020
4–GB
A1658–69021
A1658–60021
9–GB
A1658–69024
A1658–60024
Part Number A1658–90715
Edition E0498
Printed in U.S.A.
*A1658-90715*