HP Mp3130 HP mp3130 Series Digital Projector - User's Guide
HP Mp3130 - Digital Projector XGA DLP Manual
UPC - 829160021447
View all HP Mp3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Mp3130 manual content summary:
- HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 1
hp mp3130 series digital projector user's guide 1 - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 2
is" and are subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard Company shall not be liable for any errors or - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 3
buttons and lights 11 Back panel 12 Remote control 13 Accessories 15 Setting Up the Projector 16 To position projector 17 To set up on a table 19 To connect power 19 To connect a computer 20 To connect a handheld organizer 22 To connect video sources 23 Turning On and Off 27 To turn - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 4
47 To get the projector status 47 To clean the projector lens 47 To replace the lamp module 48 To replace the battery in the remote control 50 Upgrading the Projector 51 To update the firmware 51 5 Installing Permanently Installing the Projector 53 To mount the projector on a tripod 53 To - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 5
Contents 6 Fixing Problems Troubleshooting Suggestions 59 Start-up problems 60 Picture problems 61 Sound problems 65 Interruption problems 65 Remote control problems 66 Testing the Projector 67 To run the projector diagnostics 67 7 Reference Specifications 69 Safety Information 75 Safety - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 6
Contents 6 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 7
1 Setting Up The chapter explains how to install and set up the HP digital projector. ■ "What's in the Box?" on page 8 ■ "Identifying Common Features" on page 9 ■ "Setting Up the Projector" on page 16 ■ "Turning On and Off" on page 27 ■ "Making Basic Adjustments" on page 29 User's Guide 7 - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 8
4 Remote control and two AAA Control projector. batteries 5 Quick Setup Guide, warranty, Provide documentation to help get started support, and port activation and find support. documentation 6 Power cord Connects projector to power source. 7 M1-to-VGA/USB cable Connects to computer. 8 S-video - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 9
video output. - Mini-phone audio cable Connects audio source to projector. Identifying Common Features This section identifies common features and functions of the projector. ■ "Projector at a glance" on page 10 ■ "Projector buttons and lights" on page 11 ■ "Back panel" on page 12 ■ "Remote - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 10
Lamp latch Releases lamp housing for replacement. 6 Tilt button 7 Support Adjusts the height of the picture and extends the supports. Adds extra stability to the projector. 8 Security slot Secures the projector using a cable lock. 9 Receiver for remote control Receives signals from the remote - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 11
Switches to the next input source. 3 Theater video button Optimizes the picture for video input. 4 Business graphics button Optimizes the picture for data input. 5 Power button Turns the projector on or off. 6 Lamp-warning light Turns on when lamp fails. 7 Temperature-warning light Turns on - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 12
with analog- and digital-video output, including computers. Also supports USB-device output for controlling a mouse. Connects video input from devices like VCRs and DVD players. Connects video input from devices like VCRs. Connects audio source. Connects power cord to projector. 12 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 13
two AAA batteries. See "To replace the battery in the remote control" on page 50. Identifying the remote control with case closed Symbol Item Function display. 4 Source Switches to the next input source. 5 Power Powers on and off the projector. 6 Laser ring Turns on the laser pointer. 7 - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 14
laser light, and do not point the laser light into anyone's eyes. Identifying remote control with case open Symbol Item 1 Theater video button Function Optimizes the picture for video input. 2 Menu buttons Change projector settings using the on-screen menu. 3 Auto sync Resynchronizes the - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 15
.hp.com to purchase accessories such as these: ■ Smart attachment module (connect a computer through your local network, add an optional 802.11b card for wireless computer connections, and more) ■ Ceiling mount ■ Projector screen ■ Power cables ■ Replacement lamp module ■ Video cables User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 16
how to set up, plan, and connect the projector. ■ "To position projector" on page 17 ■ "To set up on a table" on page 19 ■ "To connect power" on page 19 ■ "To connect a computer" on page 20 ■ "To connect a handheld organizer" on page 22 ■ "To connect video sources" on page 23 16 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 17
Setting Up The following tables show you where to position the projector in relation to the screen. Identifying image size relative to distance from screen Image size ( in. 7.6 m 240 in. 6.1 m 404-480 in. 10.3-12.0 m 330 in. 8.4 m 264 in. 6.7 m 444-480 in. 11.3-12.0 m User's Guide 17 - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 18
following equations to help determine where to install the projector relative to the screen. Calculating projection dimensions distance from screen = B width of screen = 0.8 × diagonal of screen (for 4:3 screen) projector lens below bottom of screen = C × width of screen (for 4:3 screen) A = - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 19
the power cord to the back of the projector and the other end to an electrical outlet. 3. When you first turn on the projector, projector on the ceiling or behind the screen, see "Installing the Projector" on page 53. To connect power ■ Connect one end of the power cord to the back of the projector - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 20
(Optional) To allow the remote control to function as the computer mouse, connect the USB plug of the M1-to-VGA/USB cable into the USB port on the computer 3. 3. (Optional) To get audio, connect the mini-phone audio cable between the audio port on the projector 4 and the computer 5 20 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 21
connections are similiar to the VGA computer connection. For a visual aid, see the previous image. 1. Connect an M1-to-DVI/USB cable (available from HP) between the M1 port on the projector 1 and the DVI port on the computer 2. 2. (Optional) To allow the remote control to function as the computer - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 22
card into the organizer. ✎ Not all handhelds come with VGA-out ports. For example, the iPAQ Pocket PC requires a VGA-out PC Card with 15-pin connector. 2. Connect an M1-to-VGA/USB cable between the M1 port on the projector 1 and the other end to the VGA-out PC Card 2 on the organizer. 22 User - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 23
the S-video port on the projector 1 and the video device 2. 2. (Optional) To get audio, connect the mini-phone audio cable between the audio port on the projector 3 and the video device 4. If the video device has RCA audio connectors, use a mini-phone to RCA adapter or cable. User's Guide 23 - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 24
port on the projector 1 and RCA video port on the video device 2. 2. (Optional) To get audio, connect the mini-phone audio cable between the audio port on the projector 3 and the video device 4. If the video device has RCA audio connectors, use a mini-phone to RCA adapter or cable. 24 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 25
audio cable between the audio port on the projector 3 and the video device 4. If the video device has RCA audio connectors, use a mini-phone to RCA adapter or cable. If your video device has twist-on BNC connectors labeled RGB or similar, use an M1-to-BNC cable (available from HP). User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 26
port on the projector 3 and the video device 4. If the video device has RCA audio connectors, use a mini-phone to RCA adapter or cable. ✎ The SCART connector on the HP adapter cable contains a switch. If the picture does not seem clear with the switch set to one, set it to two. 26 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 27
Turning On and Off This section provides instructions on turning the projector on and off. ■ "To turn the projector on" on page 27 ■ "To turn the projector off" on page 28 ■ "To reset the projector" on page 28 To turn the projector on 1. Be sure the power cord is connected. 2. Remove the lens cap by - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 28
1. Press the power button on the projector or remote control to turn off the projector. The power button blinks during the cool-down period, then the projector turns off. 2. You can disconnect video and audio equipment from the projector during the cool-down period, but not the power cord. 3. If you - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 29
instructions on making basic adjustments to the projector. ■ "To aim the projector" on page 29 ■ "To adjust the focus and zoom" on page 30 To aim the projector ✎ Whenever you press the tilt button to aim the projector, the supports the supports to pop out 2, and lift the front of the projector to - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 30
Setting Up To adjust the focus and zoom 1. Rotate the focus ring until the image becomes clear. The projector can be focused at distances of 1.2 to 12 m (4 to 40 ft). 2. Rotate the zoom ring to adjust the picture size from 100 to 120%. If - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 31
with the projector. ■ "Using the Remote Control" on page 31 ■ "Showing Presentations" on page 33 Using the Remote Control ■ To turn the project on or off, press the power button 5. right-click 2 button. This feature requires a USB connection between the projector and computer. User's Guide 31 - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 32
requires a USB connection between the projector and computer. ■ Slide the remote control case open to use additional buttons. ❏ To optimize the picture for the type of input signal, press the business graphics or the theater video button. ❏ To change projector - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 33
video port. See the video port card shipped with the projector for more information. 3. If you want to adjust the projected image, see "Adjusting the Picture and Sound" on page 35. 4. You can use the remote operations, aim the remote control at the side of the projector from within a distance of - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 34
Press the source button on the projector or remote control. ■ Open the on audience temporarily. ■ Press the hide button on the remote control. ■ Open the on-screen menu and select the hide button again or any other button on the projector or remote control. ✎ If you are using Microsoft PowerPoint, - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 35
projector. ■ "Adjusting the Picture and Sound" on page 35 ■ "Using the On-Screen Menu" on page 38 Adjusting the Picture and Sound This section provides the following instructions keystone settings as needed using the menu buttons on the projector or remote control: ❏ If the top of the picture is too - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 36
up or down buttons, the automatic correction is suspended until you manually enable it again or turn off the projector. To adjust the image according to the type of picture Use the picture mode buttons on the projector or the remote control to optimize the image. ■ To optimize the picture for data - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 37
Projector available audio adjustments, see "Audio menu" on page 44. To adjust the projector setup 1. Open the on-screen menu and select Setup. 2. Set the setup you can select settings such as menu language, projector position, and lamp saver mode. To get descriptions for all available setup adjustments, - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 38
Projector Using the On-Screen Menu This section explains how to navigate the on-screen menu and provides function definitions. The tables in this section describe all the functions available in the on-screen menu for the firmware version at publication. If your firmware more times. 38 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 39
You can change the on-screen menu settings with either the buttons on the projector or on the remote control. 1. Press enter on the projector or the remote control to open the on-screen menu. 2. Press up or down to open the on-screen menu and select Setup > Timeout for menu. User's Guide 39 - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 40
zero. Next input Searches for the next available signal from an input source. Auto-sync Resynchronizes the projector to the input signal. This can compensate for any change in the signal. Hide Removes all images level. The image must be enlarged before you can use pan. 40 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 41
Adjusting the Projector Input menu For a visual aid, see "Back panel" on page 12. Input Digital/analog graphics (M1) Shows the digital or analog input to the M1 port. This port connects to several types of devices, including analog VGA and SCART devices and digital Digital Video Interface (DVI) - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 42
the type of picture. You can optimize the picture for computer presentations or video output. The remote control and projector have buttons to change the picture mode. Brightens or darkens the image. compensates for an image that is not automatically corrected by the projector. 42 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 43
Aspect ratio Selects the proportions of the image that is not automatically corrected by the projector. • To automatically adapt to most inputs, select Best Fit. • To stretch the each picture dot as one projected dot, select 1-to-1. Reset video settings Resets this menu to default settings. User - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 44
language for the menus. Sets a lower light output for longer lamp life. Adjusts the image to match the orientation of the projector: upright or upside-down, in front of or behind the before it closes. For a new lamp, resets hours of use. Resets most of the menu settings to default. 44 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 45
Help menu Help About this projector Diagnostics Adjusting the Projector Displays information and status for the projector. Show tests for checking the operation of the projector and the remote control. User's Guide 45 - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 46
Adjusting the Projector 46 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 47
instructions on performing routing maintenance. ■ "To get the projector status" on page 47 ■ "To clean the projector lens" on page 47 ■ "To replace the lamp module" on page 48 ■ "To replace the battery in the remote still dirty after washing it or the fabric is damaged, replace it. User's Guide 47 - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 48
, wear goggles and gloves when removing the lamp module. If the lamp is broken, contact HP about repairs that might be required. ■ Because the lamp assembly operates at a very high temperature, wait 30 minutes before removing the lamp module. 1. Turn off the projector and allow it to cool for 30 - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 49
Maintaining the Projector 6. Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling the lamp again. 7. Open the on-screen menu and select Setup > Reset lamp hours. Å WARNING: The lamp contains a small amount of mercury. If the lamp breaks, adequately ventilate - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 50
Maintaining the Projector To replace the battery in the remote control 1. Slide the remote control case open to reveal the battery compartment. 2. On the back of the remote control remove the battery cover 1 to reveal local restrictions on the disposal or recycling of batteries. 50 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 51
. 3. Connect the USB plug of the M1-to-VGA/USB cable into the USB port on the computer. This connection is required. 4. On the computer, run the file you downloaded by double-clicking the file. Follow the on-screen instructions. Do not turn off the projector until you are prompted. User's Guide 51 - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 52
Maintaining the Projector 52 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 53
5 Installing Permanently This chapter explains how to permanently install the digital projector. Installing the Projector This section provides instructions on how to permanently install the projector. ■ "To mount the projector on a tripod" on page 53 ■ "To install on a table" on page 54 ■ "To - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 54
Installing Permanently 3. Attach the tripod mounting block to the tripod mount hole on the bottom of the projector. 4. Attach the projector and tripod mounting block to the tripod according to the tripod manufacturer's instructions. To install on a table This installation is covered in detail in - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 55
bracket with the center hole in the lower-mount bracket, and firmly secure it with a washer and bolt. 2. Attach the mounting bracket to the projector. See the instructions that came with the ceiling mount. 3. Attach the ceiling-mount bracket to the ceiling, and firmly secure with four screws capable - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 56
projector 1.2 to 12 m (4 to 40 ft) behind a translucent screen that is designed for rear projection. See "To set up on a table" on page 19 or "To install on the ceiling" on page 55 for more instructions . 2. Open the on-screen menu and select Setup > Projector position. Then select - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 57
Permanently To lock the projector The projector includes a built-in slot to secure the projector with a cable and a lock (such as the Kensington MicroSaver lock system, available at many computer stores). 1. Wrap the cable around a secure object, such as a table leg. Loop the cable to create a slip - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 58
Installing Permanently 58 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 59
is fixed. If the suggestions do not solve your problem, contact HP. See the Support Guide included with the projector. ■ "Start-up problems" on page 60 ■ "Picture problems" on page 61 ■ "Sound problems" on page 65 ■ "Interruption problems" on page 65 ■ "Remote control problems" on page 66 User - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 60
projector lamp is not making a good connection. Turn off the projector and allow it to cool. Then, on the front of the projector, slide the latch for the lamp module up and down. Be sure it is all the way down. ❏ The projector lamp has reached the end of its life. Replace the lamp. 60 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 61
Fixing Problems Picture problems If the image is not displayed on the screen, but the HP startup screen is displayed: ❏ Press the source button on the projector or remote control. ❏ Turn off or disable the notebook or desktop computer screen saver function. ❏ For a computer connection, ensure your - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 62
Fixing Problems If the image is out of focus: ❏ Be sure the lens cap is focus.) ❏ Ensure the projection screen is 1.2 to 12 m (4 to 40 ft) from the projector. ❏ For a computer connection, set the display resolution on the computer to 1024 x 768 pixels. ❏ Check the projection lens to see if it needs - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 63
on both the external VGA port and the built-in screen. See the computer manual or the projector's video port guide. If the projected colors seem slightly wrong: ❏ If the theater video button on the projector is not lit, try pressing the theater video button on the projector or remote control. ❏ Open - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 64
projector. If the device has another output port, such as S-video, try connecting that port to the projector. If the projector stops responding to all controls: ❏ If possible, turn off the projector, then unplug the power cord and wait at least 15 seconds before reconnecting power. 64 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 65
again, install a new lamp. ❏ If the temperature indicator turns on or blinks, the projector is too hot. See the following problem. If the projector suddenly shuts down and If the condition occurs after restarting the projector, contact HP to have the projector serviced or repaired. User's Guide 65 - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 66
burn out and make a popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. ❏ If the lamp breaks, contact HP about repairs that might be required. Remote control problems If the remote control does not operate: ❏ If the indicator light on the - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 67
Fixing Problems Testing the Projector The on-screen menu contains diagnostic tests you can use to verify the proper operation of the projector and the remote control. To run the projector diagnostics 1. Open the on-screen menu and select Help > Diagnostics. 2. Select a test to perform. User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 68
Fixing Problems 68 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 69
specifications, visit the HP website at http://www.hp.com. Identifying the projector specifications Resolution XGA Technology DLP Video connectors M1-DA (digital and analog) input, optional M1-DA cables for VGA, DVI, component-video (3 RCA) and SCART S-video input Composite-video input (1 RCA - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 70
saver mode reduces lamp power to 156 W, extends rated life to up to 3000 hours Replacement lamp: L1621A Light engine 0.7 12° DDR DMD XGA Color system Two preset color modes are available: Business graphics Theater video Remote control USB mouse with laser pointer Mounting options Ceiling and - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 71
Reference Identifying the projector specifications (continued) Noise level 37 dBA Environment Operating: Temperature: 10 to 35°C (50 to 95°F) Humidity: 80% RH max, non- -20 to 55°C (-4 to 131°F) Humidity: 80% RH max, non-condensing Altitude: up to 12,000 m (40,000 ft) User's Guide 71 - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 72
Reference Analog Video Mode Compatibility Compatibility Resolution VGA 640 x 350 640 x 350 640 x 400 640 x 480 640 x 480 640 x 480 640 x 480 720 x 400 720 x 400 SVGA 800 x 600 800 x .3 31.5 37.9 35.2 37.9 48.1 46.9 53.7 48.4 56.5 60.0 68.7 63.98 79.98 63.98 34.98 35 72 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 73
Analog Video Mode Compatibility (continued) Compatibility Resolution V-Sync (Hz) MAC 16 832 x 624 74.55 MAC 19 1024 x 768 75 MAC 1152 x 870 75.06 MAC G4 640 x 480 60 MAC G4 x 1024 75 Reference H-Sync (kHz) 49.725 60.24 68.68 31.35 68.03 97.09 60 60 60 68.49 75 90.9 User's Guide 73 - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 74
Reference Digital Video Mode Compatibility Compatibility Resolution VGA 640 x 350 640 x 350 640 x 400 640 x 480 640 x 480 640 x 480 640 x 480 720 x 400 720 x 400 SVGA 800 x 600 .5 37.9 37.9 31.5 37.9 37.5 43.3 31.5 37.9 35.2 37.9 48.1 46.9 53.7 48.4 56.5 60.0 63.98 74 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 75
instructed by the manual. ■ Keep paper and other combustible material away from the projector lens to prevent the possibility of fire. ■ Use only an approved power cord reading and following the instructions carefully. ■ If the unit requires service, contact an authorized HP service center. ■ Do not - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 76
on the digital projector and remote control are classified as Class 1 LED devices according to International Standard IEC 825-1 (EN60825-1). This device is not considered harmful, but the following precautions are recommended: ■ If the unit requires service, contact an authorized HP service center - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 77
with respect to the receiver. ■ Connecting the digital projector's power cord to another power outlet. Connections to peripheral devices To maintain compliance with FCC Rules and Regulations, use properly shielded cables with this device. For more information, consult your dealer, an experienced - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 78
Reference Japan Korea 78 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 79
/IEC Guide 22 and EN 45014 Manufacturer's Name: Hewlett Packard Company Manufacturer's Address: Hewlett Packard Company Digital Projection & Imaging 1000 NE Circle Blvd. Corvallis, OR 97330-4239 Declares, that the product(s): Product Name: Digital Projector Model Number(s): mp3130/mp3135 - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 80
Reference 80 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 81
Guide Index composite video connection 24 computer with DVI port 21 computer with VGA port 20 handheld organizer 22 SCART connection 26 with S-video 23 connections see back panel contents in the box 8 D dimensions of screen and room 17 distance setting up in relation to image 16 F firmware updating - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 82
keystone correction adjusting 35 L lamp module replacing 48 lamp saver mode 37 language changing power turning off 28 turning on 27 presentations changing source 34 from a computer 33 projector adjusting 35 identifying parts 10 maintaining 47 setting up 16 troubleshooting 59 upgrading 51 User's Guide - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 83
status of projector 47 S-video connection connecting video source 23 T table installation setting up 19 testing diagnostics 67 theater video mode see picture mode tripod mounting on 53 troubleshooting interruption problems 65 picture problems 61 remote control problems 66 sound problems 65 start - HP Mp3130 | HP mp3130 Series Digital Projector - User's Guide - Page 84
Index Index 84 User's Guide
hp
mp3130 series
digital projector
user’s guide