HP Nx7400 Memory Modules

HP Nx7400 - Compaq Business Notebook Manual

Get HP Nx7400 - Compaq Business Notebook PDF manuals and user guides
UPC - 882780786653
View all HP Nx7400 manuals
Add to My Manuals
Save this manual to your list of manuals

HP Nx7400 manual content summary:

  • HP Nx7400 | Memory Modules - Page 1
    Memory Modules Document Part Number: 410772-001 April 2006 This guide explains how to replace and upgrade memory in the computer.
  • HP Nx7400 | Memory Modules - Page 2
    Contents 1 Adding or replacing memory modules Adding a memory module to the expansion memory module slot 1-2 Upgrading the memory module in the primary memory module slot 1-7 2 Effects of increasing memory Memory Modules ii
  • HP Nx7400 | Memory Modules - Page 3
    module slot. Å WARNING: To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module. Ä CAUTION: Electrostatic discharge (ESD) can damage electronic components. Before beginning any procedure, ensure that you are
  • HP Nx7400 | Memory Modules - Page 4
    the power button. Then shut down the computer through the operating system. 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface. 6. Remove the battery from the computer. 1-2 Memory Modules
  • HP Nx7400 | Memory Modules - Page 5
    Adding or replacing memory modules 7. Loosen the memory module compartment cover screw 1. 8. Lift the memory module compartment cover 2 away from the computer. Memory Modules 1-3
  • HP Nx7400 | Memory Modules - Page 6
    away the retention clips 1 on each side of the memory module. The memory module tilts up. Ä To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components of the memory module. b. Grasp the edge of the memory module 2, and gently pull the module out of
  • HP Nx7400 | Memory Modules - Page 7
    only. Do not touch the components on the memory module. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the memory module 2 into the memory module slot until it is seated. c. Gently press the memory module 3 down, applying pressure to both the
  • HP Nx7400 | Memory Modules - Page 8
    Adding or replacing memory modules 11. Align the tabs 1 on the memory module compartment cover with the notches on the computer. 12. Close the cover 2. 13. Tighten the memory module compartment cover screw 3. 14. Replace the battery. 15. Reconnect external power and external devices. 16. Turn on
  • HP Nx7400 | Memory Modules - Page 9
    pressing the power button. Then shut down the computer through the operating system. 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface. 6. Remove the battery from the computer. Memory Modules
  • HP Nx7400 | Memory Modules - Page 10
    Adding or replacing memory modules 7. Remove the 2 keyboard screws. 8. Turn the computer over and open it. 1-8 Memory Modules
  • HP Nx7400 | Memory Modules - Page 11
    Adding or replacing memory modules 9. Slide the 4 keyboard latches 1 to release the keyboard. Ä To avoid damage to the computer, do not disengage the keyboard keyboard 2 and rotate it toward the front of the computer until the keyboard rests upside down on the palm rest. Memory Modules 1-9
  • HP Nx7400 | Memory Modules - Page 12
    away the retention clips 1 on each side of the memory module. The memory module tilts up. Ä To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. b. Grasp the edge of the memory module 2, and gently pull the module out of
  • HP Nx7400 | Memory Modules - Page 13
    by the edges only. Do not touch the components on the memory module. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module 2 into the memory slot until it is seated. c. Press the memory module 3 down, applying pressure to both the left and
  • HP Nx7400 | Memory Modules - Page 14
    Adding or replacing memory modules 13. Return the keyboard to its previous position 1 and slide the 4 keyboard latches 2 to lock the keyboard. 14. Turn the computer upside down on a flat surface. 15. Replace the keyboard screws. 1-12 Memory Modules
  • HP Nx7400 | Memory Modules - Page 15
    Adding or replacing memory modules 16. Replace the battery. 17. Reconnect external power and external devices. 18. Turn on the computer. Memory Modules 1-13
  • HP Nx7400 | Memory Modules - Page 16
    2 Effects of increasing memory When random access memory (RAM) is increased, the operating system increases the hard drive space reserved for the hibernation file. If you experience problems with hibernation after increasing memory, verify that the hard drive has enough free space to accommodate a
  • HP Nx7400 | Memory Modules - Page 17
    warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Memory Modules First Edition: April 2006 Document Part Number: 410772
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
Memory Modules
Document Part Number: 410772-001
April 2006
This guide explains how to replace and upgrade memory in the
computer.