HP Nx9420 Computer Setup - Windows Vista and Windows XP
HP Nx9420 - Compaq Business Notebook Manual
UPC - 882780919211
View all HP Nx9420 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Nx9420 manual content summary:
- HP Nx9420 | Computer Setup - Windows Vista and Windows XP - Page 1
Computer Setup User Guide - HP Nx9420 | Computer Setup - Windows Vista and Windows XP - Page 2
in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: June 2007 Document Part Number: 448264-001 - HP Nx9420 | Computer Setup - Windows Vista and Windows XP - Page 3
Product notice This user guide describes features that are common to most models. Some features may not be available on your computer. iii - HP Nx9420 | Computer Setup - Windows Vista and Windows XP - Page 4
iv Product notice - HP Nx9420 | Computer Setup - Windows Vista and Windows XP - Page 5
Table of contents 1 Starting Computer Setup 2 Using Computer Setup Navigating and selecting in Computer Setup 2 Restoring factory settings in Computer Setup 3 3 Computer Setup menus File menu ...4 Security menu ...5 Diagnostics menu ...6 System Configuration menu ...6 Index ...8 v - HP Nx9420 | Computer Setup - Windows Vista and Windows XP - Page 6
vi - HP Nx9420 | Computer Setup - Windows Vista and Windows XP - Page 7
be used even when the operating system is not working or will not load. NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your computer. NOTE: Pointing devices are not supported in Computer Setup. You must use the keyboard to navigate and make selections. NOTE - HP Nx9420 | Computer Setup - Windows Vista and Windows XP - Page 8
System Configuration menus. 1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the "f10 = ROM Based Setup" message is displayed in the lower-left corner of the screen. Because Computer Setup is not Windows-based, it does not support the instructions on - HP Nx9420 | Computer Setup - Windows Vista and Windows XP - Page 9
on or restarting the computer, and then pressing f10 while the "f10 = ROM Based Setup" message is displayed in the lower-left corner of the screen. 2. Use Then follow the instructions on the screen. Your preferences go into effect when the computer restarts. NOTE: Your password settings and security - HP Nx9420 | Computer Setup - Windows Vista and Windows XP - Page 10
computer and the batteries in the system. ● View specification information for the processor, cache and memory size, system ROM, video revision, and keyboard controller version. Replace the configuration settings in Computer Setup with the original factory settings. (Password settings and security - HP Nx9420 | Computer Setup - Windows Vista and Windows XP - Page 11
on any computer hard drive. ● Change a DriveLock user password or master password. NOTE: DriveLock settings are accessible only when you enter Computer Setup by turning on (not restarting) the computer. Enable/disable support for smart card and Java™ Card poweron authentication. NOTE: Power-on - HP Nx9420 | Computer Setup - Windows Vista and Windows XP - Page 12
legacy support allows the following: ◦ Use of a USB keyboard in Computer Setup even when a Windows operating system is not running. ◦ Startup from bootable USB devices, including a hard drive, diskette drive, or optical drive connected by a USB port to the computer or to an optional docking device - HP Nx9420 | Computer Setup - Windows Vista and Windows XP - Page 13
the ambient light sensor. ● Enable/disable the optical disk drive. ● Enable/disable the Fingerprint reader. ● Enable/disable the serial port. ● Enable/disable the parallel port. ● Enable/disable the flash media reader. ● Enable/disable the USB port, including the ExpressCard slot. CAUTION: Disabling - HP Nx9420 | Computer Setup - Windows Vista and Windows XP - Page 14
check 6 stringent security 5 System Configuration menu 6 system fan 6 system information 4 U USB legacy support 1, 6 E Execution Disable 6 F File menu 4 H hard drive test 6 L language, changing in Computer Setup 6 legacy support, USB 1, 6 M memory check 6 P parallel port mode 6 8 Index - HP Nx9420 | Computer Setup - Windows Vista and Windows XP - Page 15
Computer Setup
User Guide