HP Nx9420 Memory Modules - Windows Vista

HP Nx9420 - Compaq Business Notebook Manual

Get HP Nx9420 - Compaq Business Notebook PDF manuals and user guides
UPC - 882780919211
View all HP Nx9420 manuals
Add to My Manuals
Save this manual to your list of manuals

HP Nx9420 manual content summary:

  • HP Nx9420 | Memory Modules - Windows Vista - Page 1
    Memory Modules Document Part Number: 419585-001 January 2007 This guide explains how to replace and upgrade memory in the computer.
  • HP Nx9420 | Memory Modules - Windows Vista - Page 2
    Contents Adding or replacing memory modules Adding a memory module to the expansion memory module slot 2 Upgrading a memory module in the primary memory module slot 7 Index Memory Modules ii
  • HP Nx9420 | Memory Modules - Windows Vista - Page 3
    module slot. Å WARNING: To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module. Ä CAUTION: Electrostatic discharge (ESD) can damage electronic components. Before beginning any procedure, ensure that you are
  • HP Nx9420 | Memory Modules - Windows Vista - Page 4
    module in the expansion memory module slot: 1. Save your work and close all open programs. ✎ Be sure that the computer is not in Hibernation. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through
  • HP Nx9420 | Memory Modules - Windows Vista - Page 5
    Adding or replacing memory modules 8. Loosen the 3 memory module compartment cover screws 1. 9. Lift the memory module compartment cover 2 away from the computer. Memory Modules 3
  • HP Nx9420 | Memory Modules - Windows Vista - Page 6
    Adding or replacing memory modules 10. To remove a memory module: a. Pull away the retention clips 1 on each side of the memory module. The memory module tilts up. b. Grasp the edges of the memory module 2 and gently pull the module out of the memory module slot. To protect a memory module after
  • HP Nx9420 | Memory Modules - Windows Vista - Page 7
    the notched edge 1 of the memory module with the tab in the memory module slot. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module 2 into the memory module slot until it is seated. c. Press the memory module down 3 until the retention
  • HP Nx9420 | Memory Modules - Windows Vista - Page 8
    module compartment cover with the notches on the computer. 13. Close the memory module compartment cover 2. 14. Tighten the 3 memory module compartment cover screws 3. 15. Replace the battery. 16. Reconnect external power and external devices. 17. Turn on the computer. If the computer displays
  • HP Nx9420 | Memory Modules - Windows Vista - Page 9
    Start, click the arrow next to the Lock button, and then click Shut Down. 3. Close the display. 4. Disconnect all external devices connected to the computer. 5. Disconnect the power cord. 6. Turn the computer upside down on a flat surface. 7. Remove the battery from the computer. Memory Modules 7
  • HP Nx9420 | Memory Modules - Windows Vista - Page 10
    Adding or replacing memory modules 8. Remove the 4 keyboard screws. 9. Turn the computer over and open it. 10. Gently lift the top edge of the keyboard and tilt the keyboard over until it rests on the palm rest of the computer. 8 Memory Modules
  • HP Nx9420 | Memory Modules - Windows Vista - Page 11
    module slot: a. Pull away the retention clips 1 on each side of the memory module. The memory module tilts up. b. Grasp the edge of the memory module 2 and gently pull the module out of the memory module slot. To protect a memory module after removal, place it in an electrostatic-safe container
  • HP Nx9420 | Memory Modules - Windows Vista - Page 12
    the tab in the memory module slot. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module 2 into the memory module slot until it is seated. c. Press the memory module down until the retention clips 3 snap into place. 10 Memory Modules
  • HP Nx9420 | Memory Modules - Windows Vista - Page 13
    Adding or replacing memory modules 13. Return the keyboard to its previous position and close it. 14. Turn the computer upside down. 15. Replace the 4 keyboard access screws. Memory Modules 11
  • HP Nx9420 | Memory Modules - Windows Vista - Page 14
    Adding or replacing memory modules 16. Replace the battery. 17. Reconnect external power and external devices. 18. Turn on the computer. If the computer displays a message indicating that the size or configuration of the memory has changed, press f1 to save the changes. 12 Memory Modules
  • HP Nx9420 | Memory Modules - Windows Vista - Page 15
    C compartment, memory module 1 E electrostatic discharge (ESD) 1 ESD (electrostatic discharge) 1 M memory module compartment 1 memory module compartment, expansion 2 memory module, removing or inserting 2 Index Memory Modules Index-1
  • HP Nx9420 | Memory Modules - Windows Vista - Page 16
    warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Memory Modules First Edition: January 2007 Document Part Number: 419585-001
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
Memory Modules
Document Part Number: 419585-001
January 2007
This guide explains how to replace and upgrade memory in the
computer.