HP OMEN X Desktop PC 900-200i Hardware Reference Guide

HP OMEN X Desktop PC 900-200i Manual

Get HP OMEN X Desktop PC 900-200i PDF manuals and user guides View all HP OMEN X Desktop PC 900-200i manuals
Add to My Manuals
Save this manual to your list of manuals

HP OMEN X Desktop PC 900-200i manual content summary:

  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 1
    Hardware Reference Guide OMEN X
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 2
    and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Second Edition: October 2017 First Edition: September 2017 Document Part Number: L05970-002 Product notice This guide
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 3
    About this book WARNING! Indicates a hazardous situation that, if not avoided, could result in death or serious injury. CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. IMPORTANT: Indicates information considered important but not hazard-
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 4
    iv About this book
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 5
    Cleaning filters ...32 Appendix A Electrostatic discharge ...33 Preventing electrostatic damage ...33 Grounding methods ...33 Appendix B Computer operating guidelines and routine care 34 Appendix C Accessibility ...35 Supported assistive technologies ...35 Contacting
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 6
    Index ...36 vi
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 7
    1 Product features OMEN X is a high performance, customizable, expandable gaming tower. NOTE: Product colors and features may vary. 1
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 8
    Front Component (1) Lighted color zones (2) Vents (2) (3) Tool kit (located under the logo panel) (4) Stand Description Create unique lighting effects on the computer. NOTE: See Color zones on page 3 for more information. Enable airflow to cool internal components. NOTE: The computer fan
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 9
    Color zones The computer includes nine programmable lighted color zones that allow you to create unique lighting effects. With OMEN Control, you can customize the colors of each zone or group of zones. NOTE: When you first set up your computer, all of the color zones are red. There are five color
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 10
    Right Component (1) Power button (2) Power light (3) Wireless light Description ● When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button briefly to initiate Sleep. ● When the computer is in the Sleep state, press the button briefly to
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 11
    refer to the Regulatory, Safety, and Environmental Notices. To access this guide: ▲ Select the Start button, select HP Help and Support, and then select HP Documentation. NOTE: When a device is connected it from the memory card reader. Hard drive lock Locks the hard drive service door. Right 5
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 12
    Back Component (1) (2) (3) (4) (5) (6) (7) Description Side panel release latch Releases the side panel. WARNING! To reduce the risk of serious injury or damage to the equipment, do not open the chassis cover of any computer containing a 600 W PSU, 750 W PSU, or 1300 W PSU. To determine if you
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 13
    , earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental Notices. To access this guide: ▲ Select the Start button, select HP Help and Support, and then select HP Documentation. NOTE: When a device is connected to a headphone jack, the computer speakers
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 14
    performing upgrades, be sure to carefully read all of the applicable instructions, cautions, and warnings. WARNING! To reduce the risk of personal It also provides electrical and mechanical safety information. The Safety & Comfort Guide is located on the HP website at http://www.hp.com/ergo. WARNING
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 15
    from the case (2). The tool kit is located under the logo cover (3). Replacing or installing drives The case offers four hard drive bays. The case supports three different drive types: Accessing the tool kit 9
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 16
    ● 3.5-inch hard drive ● 2.5-inch solid-state drive ● U.2 drive NOTE: U.2 hard drives can be installed only in the upper-right drive bay. Installing a drive 1. Prepare the computer for disassembly (Preparing for disassembly on page 8). 2. Pull up on the right side of the hard drive door, and then
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 17
    4. All drives must be secured into the drive cage using screws. Screw locations are as follows: (1) 3.5-inch hard drive and U.2 drive (2) 2.5-inch solid-state drive NOTE: Before installing a U.2 drive into the drive cage, you must first install the drive into a drive adapter bracket. 5. To install a
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 18
    b. 2.5-inch solid-state drive: Insert the drive into the drive cage (1), and then install four mounting screws (2). c. U.2 drive: Insert the drive into the adapter bracket and secure with four screws (1). Insert the adapter bracket assembly into the drive cage (2), and then install four mounting
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 19
    6. Insert the drive cage into the drive bay (1), and then slide the drive cage latch to the right to secure the drive cage (2). 7. Rotate the hard drive door to the right and press down until it snaps into place. Replacing or installing drives 13
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 20
    Removing a drive IMPORTANT: Before you remove a hard drive, be sure to back up the data from the hard drive so that you can transfer the data to the new hard drive. 1. Prepare the computer for disassembly (Preparing for disassembly on page 8). 2. Pull up on the right side of the hard drive door, and
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 21
    b. 2.5-inch solid-state drive: Remove the four mounting screws from the bottom of the cage (1) and then lift the drive out of the cage (2). Replacing or installing drives 15
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 22
    c. U.2 drive: Remove the four mounting screws that secure the drive adapter bracket to the drive cage (1). Lift the adapter bracket out of the drive cage (2), and remove the four screws that secure the drive to the adapter bracket (3). Then remove the drive from the adapter bracket. Drive security
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 23
    2. From the outside of the drive cage, insert the pull tab into the drive cage until it is not accessible from the outside of the drive cage. 3. To remove a hard drive when the pull tab is not accessible, slide the drive cage latch to the left (1), insert the security tool from the tool kit (
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 24
    ● Unbuffered non-ECC PC4-19200 DDR4-2400 MT/s-compliant (downgraded to DDR4-2133) ● Unbuffered non-ECC PC4-17000 DDR4-2133 MT/s-compliant ● Support CAS latency 15 DDR4 2133 MT/s (15-15-15 timing) ● Contain the mandatory Joint Electronic Device Engineering Council (JEDEC) specification The computer
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 25
    Populating DIMM sockets There are four DIMM sockets on the system board, with two sockets per channel. The sockets are labeled DIMM1, DIMM2, DIMM3, and DIMM4. The DIMM1 and DIMM3 sockets operate in memory channel A. The DIMM2 and DIMM4 sockets operate in memory channel B. For improved performance,
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 26
    Replacing or installing DIMMs IMPORTANT: You must unplug the power cord and wait approximately 30 seconds for the power to drain before adding or removing memory modules. Regardless of the power-on state, voltage is always supplied to the memory modules as long as the computer is plugged into an
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 27
    4. Insert the memory module into the socket so that the latches lock it in place. NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket. 5. Replace the access panel. 6. Reconnect the power cord and any external devices, and then turn
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 28
    Installing graphics cards You can install multiple graphics cards and associated fans. 1. Prepare the computer for disassembly (Preparing for disassembly on page 8). 2. Remove the access panel (Removing and replacing the access panel on page 18). 3. To install a graphics card: a. Locate the a vacant
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 29
    a. Remove the cover from the location where you will install the graphics card fan. b. From the inside of the case, insert the fan into place on the outer wall (1). c. From the outside of the case, install four screws (2) with the screwdriver/wrench from the tool kit (Accessing the tool kit on page
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 30
    Removing the PCI fan The PCI fan is secured to the front of the case and provides additional cooling for the graphics cards. You must remove the entire front bezel before you can remove or install the PCI fan. 1. Prepare the computer for disassembly (Preparing for disassembly on page 8). 2. Remove
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 31
    c. Lift the fan out of the case (3). To replace the PCI fan, reverse the removal procedures. Installing a system board The system board is secured to a system board tray. You must remove the tray before you can remove or install a system board. 1. Prepare the computer for disassembly (Preparing for
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 32
    4. To install the system board, position the system board atop the system board tray, and then install the eight screws that secure the system board to the system board tray. 5. Replace the system board tray assembly in the case. 6. Install any graphics cards. 7. Install all other internal
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 33
    Removing the hard drive fan The hard drive fan is secured to the rear of the case under the system board tray. You must remove the tray before you can remove or install the hard drive fan. 1. Prepare the computer for disassembly (Preparing for disassembly on page 8). 2. Remove the access panel (
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 34
    Installing a power supply The computer supports power supplies that follow the ATX standard with a maximum of 1450 W. CAUTION: To prevent damage, the overall power consumption of the computer must not exceed
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 35
    7. Install three screws to secure the power supply to the case (2). NOTE: You will install one other screw in the next step to secure the grounding wire. 8. To install the power supply connector cable into the case: a. Place the connector into the corner of the power supply bay (1). b. Install the
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 36
    9. Connect the power supply SATA cables (1) and I/O board and cable (2). Five SATA power cables (four hard drive + one U.2 drive) and one PATA power connector (from the I/O board) are available to connect to the power supply. The cables in the computer case are labeled to indicate components they
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 37
    bracket in one of the positions shown in the following image. NOTE: On models that support only one bracket, you can install the bracket in either position 1 or 2. On models that support two brackets, you can install the brackets in either positions 1 and 3 or positions 2 and 3. Installation
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 38
    6. Install the eight hex screws using the wrench/screwdriver from the tool kit (Accessing the tool kit on page 9) to secure the bracket to the case. 7. Install any needed fans. Cleaning filters 1. Prepare the computer for disassembly (Preparing for disassembly on page 8). 2. Remove the access panel
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 39
    workstations. Wear the straps on both feet when standing on conductive floors or dissipating floor mats. ● Use conductive field service tools. ● Use a portable field service kit with a folding static-dissipating work mat. If you do not have any of the suggested equipment for proper grounding
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 40
    B Computer operating guidelines and routine care Follow these guidelines to properly set up and care for the computer and monitor: ● Keep the computer away from excessive moisture, direct sunlight, and extremes of heat and cold. ● Operate the computer on a sturdy, level surface. Leave a 10.2 cm (4-
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 41
    features. NOTE: For additional information about a particular assistive technology product, contact customer support for that product. Contacting support We are constantly refining the accessibility of our products and services and welcome feedback from users. If you have an issue with a product or
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 42
    Index A access panel removal 18 accessibility 35 accessing the tool kit 9 audio-in (microphone) jack 5 audio-out (headphone) jacks 7 audio-out (headphone)/audio-in (microphone) jack, identifying 5 B buttons power 4 C color zones 3 color zones, identifying 2 components back 6 bottom 7 right 4
  • HP OMEN X Desktop PC 900-200i | Hardware Reference Guide - Page 43
    U USB 3.0 charging (powered) port, identifying 5 USB 3.0 port, identifying 5, 6 USB Type-C port, identifying 5 V ventilation guidelines 34 vents, identifying 2, 6, 7 W wireless light 4 Index 37
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
Hardware Reference Guide
OMEN X