HP Officejet 7300 Network Guide - Page 30
Glossary - installation software
View all HP Officejet 7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
b Glossary ASCII autoIP DHCP DNS DNS-SD DSL Ethernet Ethernet cable EWS HEX hub IP address infrastructure American Standard Code for Information Interchange. The standard for numbers used by computers to represent all the uppercase and lowercase Latin letters, numbers, punctuation, etc. A feature of the installation software, which determines the configuration parameters of devices on the network. Dynamic Host Configuration Protocol. A server on the network that supplies configuration parameters to devices on the network. On small networks, this could be a router. Domain Name Service. When you use the web or send an e-mail message, you use a domain name to do it. For example, the URL http:// www.hp.com contains the domain name hp.com. The DNS on the Internet translates the domain name into an IP address. Devices use the IP addresses to refer to one another. See DNS. The SD portion stands for Service Discovery. This is part of a protocol developed by Apple that enables automatic discovery of computers, devices, and services on IP networks. Digital Subscriber Line. A high-speed connection to the Internet. The most common local network technology that connects computers using copper cabling. The cable used to connect network elements in a wired network. The CAT-5 Ethernet cable is also known as a straight-through cable. When using an Ethernet cable, the network elements must be attached to a router. The Ethernet cable uses an RJ-45 connector. Embedded Web Server. A browser-based utility that provides a simple way to manage your HP all-in-one. You can monitor status, configure HP all-in-one networking parameters, or access HP all-in-one features. For more information, see Use the Embedded Web Server. Hexidecimal. The base 16 numbering system, which uses the digits 0-9 plus the letters A-F. No longer used much in modern home networks, a hub takes its signal from each computer and sends it to all of the other computers connected to the hub. Hubs, are passive; other devices on the network plug into the hub in order to communicate with one another. A hub does not manage the network. A number that uniquely identifies the device on the network. IP addresses are assigned dynamically through DHCP or AutoIP. You can also set up a static IP address, though this is not recommended. An infrastructure network uses a router, switch, or access point to connect network elements. HP all-in-one Network Guide 27