HP Officejet Pro L7600 User Guide - Page 86

Chapter 8 To set the redial options • Embedded Web server (network connection): Open the embedded Web server, click the Settings tab, click Fax in the left pane, and then click the Advanced tab. • Control panel: Press Setup, press Advance Fax Setup, and then use the Busy Redial or No Answer Redial options. Set the fax speed You can set the fax speed used to communicate between your device and other fax machines when sending and receiving faxes. The default fax speed is Fast. If you use one of the following, setting the fax speed to a slower speed might be required: • An Internet phone service • A PBX system • Fax over Internet Protocol (FoIP) • An integrated services digital network (ISDN) service If you experience problems sending and receiving faxes, you might want to try setting the Fax Speed setting to Medium or Slow. The following table provides the available fax speed settings. Fax speed setting Fast Medium Slow Fax speed v.34 (33600 baud) v.17 (14400 baud) v.29 (9600 baud) To set the fax speed from the control panel 1. Press Setup. 2. Select Advanced Fax Setup, and then press Fax Speed. 3. Select an option using the arrow keys, and then press OK. Fax over the Internet You may subscribe to a low cost phone service that allows you to send and receive faxes with your device by using the Internet. This method is called Fax over Internet Protocol (FoIP). You probably use a FoIP service (provided by your telephone company) if you: • Dial a special access code along with the fax number, or • Have an IP converter box that connects to the Internet and provides analog phone ports for the fax connection. NOTE: You can only send and receive faxes by connecting a phone cord to the port labeled "1-LINE" on the device and not from the Ethernet port. This means that your connection to the Internet must be done either through a converter box (which supplies regular analog phone jacks for fax connections) or your telephone company. 82 Fax (some models only)