HP OmniBook 600C fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa
HP OmniBook 600C - Notebook PC Manual
View all HP OmniBook 600C manuals
Add to My Manuals
Save this manual to your list of manuals |
HP OmniBook 600C manual content summary:
- HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 1
hp StorageWorks HAFM server installation guide Part Number: A6582-96001/AA-RT4KA-TE First Edition (August 2002) This document describes the setup and configuration requirements for the HP Omnibook 6000/6200 notebook PC to function as an HAFM Server. - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 2
warranties for Hewlett-Packard Company products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. Printed in the U.S.A. HAFM server installation guide First Edition (August 2002) Part Number - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 3
x Rack Stability xi Getting Help xi HP Technical Support xi HP Website xii HP Authorized Reseller xii 1 Introduction Introduction 1-1 2 System Requirements Requirements and Capabilities of the Omnibook PC 2-1 3 PC Setup and Configuration Drive Assignments 3-1 CMOS Setup 3-1 Install LAN Card - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 4
Information 9-2 Restore the HAFM Server 9-3 Install or Upgrade Software 9-4 10 Sliding Shelf Installation for HAFM Server Installing the HAFM Server Sliding Shelf into a Supported Cabinet (Optional). . . . . 10-1 Index Figures 4-1 Power Options Properties window 4-2 iv HAFM server installation - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 5
box 8-3 Services window 8-5 Installing the sliding shelf brackets 10-2 Positioning the sliding shelf bracket on a rail rear slot 10-3 Positioning the sliding shelf bracket at the rack front 10-4 Tables 1 Document Conventions ix 2-1 HAFM Server System Requirements 2-1 3-1 CMOS Settings - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 6
- HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 7
this Guide This installation guide provides information to help you: • Set up the HP Omnibook 6000/6200 notebook PC. • Configure the HP Omnibook 6000/6200 notebook PC to function as a high availability fabric manager (HAFM) server. • Install the HAFM server and its slide out shelf into a supported - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 8
-96004/AV-RSU0A-TE • hp StorageWorks edge switch 2/32 flexport upgrade instructions, A7290-96001/AA-RS33A-TE • hp StorageWorks edge switch 2/16 installation guide, A7284-96001/AA-RSU2A-TE • hp StorageWorks edge switch 2/16 service manual, A7284-96002/AA-RS2JA-TE • hp StorageWorks edge switch 2/16 - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 9
font Sans serif font (http://thenew.hp.com) Symbols in Text These symbols may be found in the text of this guide. They have the following meanings. WARNING Text set off in this manner presents clarifying information or specific instructions. NOTE: Text set off in this manner presents commentary, - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 10
touching. Power supplies or systems marked with these symbols indicate the presence of multiple sources of power. WARNING: To reduce the risk of injury from electrical shock, remove all power cords to completely disconnect power from the power supplies and systems. x HAFM server installation guide - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 11
local occupational health and safety requirements and guidelines for manually handling material. Rack Stability WARNING: To reduce the risk guide, contact an HP authorized service provider or access our website: http://thenew.hp.com. HP Technical Support In North America, call technical support - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 12
this Guide Be sure to have the following information available before calling: • Technical support registration number (if applicable) • Product serial numbers • Product model names and numbers • Applicable error messages • Operating system type and revision level • Detailed, specific questions HP - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 13
HP Omnibook 6000/6200 notebook PC to function as an HAFM server. This is to be used as a guide installation of additional software (including patches or service packs) may interfere with normal operation. The page 3-1 describes the hardware configuration and CMOS setup. • "Windows 2000 Setup and - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 14
Introduction • "HAFM Operation" on page 8-1 describes operating the management services of the HAFM • "Backing Up and Restoring the HAFM Server" on page 9-1 describes steps required to steps required to install the sliding shelf for the HAFM server in a cabinet. 1-2 HAFM server installation guide - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 15
128 MB RAM 4 GB hard drive Single Ethernet 10/100 Mbps interface Zip Drive CD-ROM Drive Modem Color VGA 1024 x 768 resolution Video power down when lid is closed Auto boot when power is applied Actual Capabilities HP Omnibook 6000/6200 800 Mhz Pentium III 160 MB RAM 18 GB hard drive Internal 3Com - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 16
- HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 17
or upgrade) CMOS Setup Certain options must be configured properly in the CMOS Setup Utility. The Setup Utility is entered by pressing the F2 key when prompted immediately after applying power to the HP Omnibook PC. All options may be left at their default settings except for specific options - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 18
PC Setup and Configuration Table 3-1: CMOS Settings (Continued) Display Time-out: Suspend Time-out: Hibernate Time-out: Hard Disk Time-out: Time-out on AC: Lid Switch Mode: Resume On Serial Ring: Resume On 3Com 10/100 Type III CardBus PC Card in the CardBus slot. 3-2 HAFM server installation guide - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 19
on the HP Omnibook 6000/6200 PC, Windows 2000 must be installed. Windows 2000 is not factory installed on the HP Omnibook 6200 PC. To install Windows 2000, use the HP System Recovery CDs that come with the PC. See the README.TXT file on Disk 1 of these CDs for specific instructions on performing - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 20
Windows 2000 Setup and Configuration Figure 4-1: Power Options Properties window 3. Choose Always On from the Power schemes drop-down list. 4. Click OK. 4-2 HAFM server installation guide - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 21
server to be installed and configured properly on the HP Omnibook PC. The Web server is used by the FTP server as part of an optional component called Internet Information Services (IIS). This -click Add/Remove Programs. The Add/Remove Programs window displays. 3. Click Add/Remove Windows Components - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 22
check boxes: - FrontPage 2000 Server Extensions - SMTP Service - Visual InterDev RAD Remote Deployment Support 7. Click OK, then click Next. 8. When prompted with Please insert the Compact Disc labeled 'Service Pack Files' into your CD-ROM drive, click OK. 5-2 HAFM server installation guide - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 23
Service Pack Files into the drive selected below, type c:\i386 and click OK. Web Server Configuration The Web server is used to download Web server configuration is required specifically for HAFM use. FTP Server The FTP server home directory must be located at c:\inetpub\ftproot. This is the guide 5-3 - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 24
Service Manager. The Internet Information Services window displays. 4. Expand the tree in the Internet Information Services OK. 8. From the Internet Information Services window, right-click Default FTP HAFM has not yet been installed, you must manually create this folder before you will be allowed - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 25
Omnibook PC by completing the following steps: 1. Insert the HAFM Applications CD into the CD-ROM drive and run the installation program named HAFM_ServerInstall.exe. 2. The installer program will guide complete, power off the PC. Replace the internal CD-ROM drive with an internal Zip drive and blank - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 26
- HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 27
network information. Connecting the HAFM Server to a LAN You can connect the HAFM server to the single customer-supplied private corporate Ethernet LAN with or without an HP-supplied Ethernet hub. Optionally, you can configure a separate dedicated private LAN between the HAFM server and the switch - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 28
as directed by the customer's network administrator. b. If the HAFM server is installed on the HP-supplied Ethernet hub, connect the cable to any available hub port. 3. Optionally, connect the HAFM server hub, as directed by the customer's network administrator. 7-2 HAFM server installation guide - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 29
for the HAFM server: 1. Power on the HAFM server. The password are case-sensitive. Consult with the customer's network administrator to change the user name and password. The Windows 2000 desktop opens and the HAFM Login dialog box displays, as shown in Figure 7-2. HAFM server installation guide - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 30
and Workgroup (Domain) fields display the names that were set up during Windows 2000 installation. Record this computer name for reference if the HAFM server hard drive fails and must be restored. 7-4 HAFM server installation guide - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 31
on a private corporate LAN and the computer name requires change, click Properties. The Identification Changes dialog box displays, as shown in Figure 7-4. HAFM server installation guide 7-5 - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 32
to the System Properties dialog box. Record the changed computer name for reference if the HAFM server hard drive fails and must be restored. 9. Choose Start > Settings > Network and Dial-up Connections. The Status dialog box displays, as shown in Figure 7-5. 7-6 HAFM server installation guide - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 33
HAFM Server Configuration Figure 7-5: Local Area Connection Status dialog box 11. Click Properties. The Local Area Connection Properties dialog box displays, as shown in Figure 7-6. HAFM server installation guide 7-7 - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 34
a PCMCIA NIC has been installed by the customer), choose the Ethernet connection embedded in the laptop in the Connect using field. 12. Double-click Internet Protocol (TCP/IP). The Internet Protocol (TCP/IP) Properties dialog box displays, as shown in Figure 7-7. 7-8 HAFM server installation guide - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 35
If the IP address is allocated automatically using a DHCP server, click Obtain an IP address automatically. or If the IP address is assigned manually, click Use the following IP address. Enter the IP address, subnet mask, and default gateway address obtained from the customer's network administrator - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 36
a DHCP server, click Obtain DNS Server address automatically. or If the IP address is assigned manually, click Use the following DNS Server addresses. Enter the IP address of the preferred and alternate 7-8: Advanced TCP/IP Settings dialog box-IP Settings tab 7-10 HAFM server installation guide - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 37
for the HAFM server and the managed switch products, repeat steps 10-13. Choose the PCMCIA NIC Ethernet connection in step 12. HAFM server installation guide 7-11 - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 38
option and click Yes to power off the PC. Set HAFM password are case-sensitive. Consult with the customer's network administrator to change the user name and password. The Windows 2000 desktop opens and the HAFM Login dialog box displays, as shown in Figure 7-10. 7-12 HAFM server installation guide - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 39
. 5. Double-click Date/Time. The Date/Time Properties dialog box displays with the Date & Time page open, as shown in Figure 7-11. HAFM server installation guide 7-13 - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 40
HAFM Server Configuration Figure 7-11: Date/Time Properties dialog box NOTE: The Time Zone field must be set before the Date & Time field. 6. At the Date/Time Properties dialog box, click the Time Zone tab. The Time Zone tab displays, as shown in Figure 7-12. 7-14 HAFM server installation guide - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 41
at the top of the dialog box. b. If instructed by the customer's system administrator, select Automatically adjust clock for daylight saving changes. c. Click Apply. Record time zone and daylight savings information for reference if the HAFM server hard drive fails and must be restored. 8. Click the - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 42
the HP Proactive Services software. HP Proactive Services software is offered at no additional charge for subsystems covered under an on-site warranty or on-site storage hardware support contract. To order Proactive Services software, contact your Hewlett-Packard customer service representative - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 43
procedure are configured only once per installation. To configure the call-home feature, complete the following instructions for Windows 2000: 1. Ensure an analog telephone cable is routed and connected to the modem. Dial window displays, as shown in Figure 7-14. HAFM server installation guide 7-17 - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 44
HAFM Server Configuration Figure 7-14: Phone Number to Dial window 4. Select the Use dialing rules check box. 5. Enter information in the Area code, Phone number, and Country/region code fields, and then click Next. Figure 7-15: Connection Availability window 7-18 HAFM server installation guide - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 45
9. Select a location and click Edit. The Edit Location dialog box displays dialog box. 11. Unless instructed otherwise, leave the default phone If instructed by the customer to use support is not to be permitted for the installation, go to "Test Remote Notification" on page 7-22 for instructions - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 46
support is enable a dial-up connection for the built-in service user account. The default configuration does not allow any display a list of users. 5. Right-click the Service user name in the list of users and then click instructions on testing the call-home feature. 7-20 HAFM server installation - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 47
automatic event notification to a support center for reporting director problems. In order to report events, this feature requires the HAFM server to have a valid LAN connection to a SANworks Management Appliance or other server running the HP Proactive Services software. IMPORTANT: To order - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 48
fabric. 5. See "Test Remote Notification" on page 7-22 for instructions on testing the call-home feature. Test Remote Notification If the e- via Dial-out Feature, or • Configure and Enable the Proactive Services Call-Home via LAN Feature. Perform the following to test remote installation guide - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 49
HAFM Server Configuration 5. Click Send Test. Call-home and e-mail test messages are transmitted and an Information dialog box displays. 6. Click OK. 7. Verify that the intended users received the Call-Home and e-mail notifications. HAFM server installation guide 7-23 - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 50
- HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 51
FTP servers, you must remove the internal CD-ROM drive from the HP Omnibook 6000/6200 PC and replace it with the internal Zip drive and blank disk. Do this while the PC is powered off. Because the HAFM server application is installed as a Windows 2000 service, operation automatically begins after - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 52
Green Circle - Fully operational. • Yellow Triangle - An internal problem has been detected, but operations continue. • Red Diamond - A fatal problem has been detected and operations have ceased. Figure 8-1: HAFM Services window The HAFM Services window cannot be closed by clicking the X button in - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 53
HAFM Operation Figure 8-2: HA-Fabric Manager Login dialog box For more information about the HAFM Login and operation of the HAFM user interface, please refer to the hp StorageWorks ha-fabric manager user guide. HAFM server installation guide 8-3 - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 54
Services. 3. To resume services, return to the Start menu, locate the HAFM application, and click Start Services. Accessing the Service Control Manager Alternatively, to access the Service The Administrative window displays. 3. Double-click Services. The Services window displays, as shown in Figure - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 55
Operation Figure 8-3: Services window The HAFM service is called HAFM Services, as shown in Figure 8-3. Using HAFM Server to Manage the SAN The HAFM server can be used to manage your SAN. For more information, see hp StorageWorks ha-fabric manager user guide. HAFM server installation guide 8-5 - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 56
- HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 57
drive is updated as well. The directory contains all HAFM configuration data and is used to restore the HAFM server operating environment in case of hard drive failure. The HAFMData directory contains: • HAFM configuration data (director and switch definitions, user names and passwords RAM - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 58
Backing Up and Restoring the HAFM Server 2. Back up the director and switch configuration file to the HAFM server. For instructions, see hp StorageWorks director 2/64 installation guide. 3. If the Hardware View page for any director or switch is open, click Close and return to the Products View page - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 59
described in Chapter 5. 3. Perform the HAFM Management application installation procedures described in Chapter 6. 4. Perform the HAFM server configuration procedures described in Chapter 7. HAFM server installation guide 9-3 - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 60
PC with Internet access, open the HP website at: http://thenew.hp.com/country/us/eng/support.html. b. Click the HAFM Downloads folder in the left panel. c. The new HAFM version is downloaded and saved to the HAFM server or PC hard drive. If the new HAFM version was downloaded to a PC (not the - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 61
directory path (hard drive or CD-ROM drive) and Follow the online instructions for the InstallAnywhere program password and click OK. The Windows 2000 desktop password is set up during Windows 2000 installation. The user name and password are case-sensitive. If required, obtain the user name, password - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 62
- HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 63
hp 9000 series and hp 11000 series • hp rack system/e or 19-inch EIA rack NOTE: The installation of the HAFM server sliding shelf is not supported above the switch may also be used.) 2. On each rack rear column, locate the hole (1) that is 2 holes up from the EIA number of the installation guide 10-1 - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 64
the rail front tabs (1 see Figure 10-3) from the sliding shelf by removing the three screws for each tab. Reinstall the rail front tabs to the sliding shelf one screw location forward from the original location. Ensure that the distance from the rail front tab to the back of the shelf increases - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 65
. At the back of the rack, tighten the screws that attach the sliding shelf rails to the mounting brackets (see Figure 10-2 (2)). HAFM server installation guide 10-3 - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 66
Sliding Shelf Installation for HAFM Server Figure 10-3: Positioning the sliding shelf bracket at the rack front 10-4 HAFM server installation guide - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 67
HP system recovery 4-1 Windows 2000 4-1 Windows NT 4-1 CMOS server installation guide Index F services 8-1 set date 7-12 set time 7-12 setting date and time 7-12 system requirements 2-1 HAFM services start and stop 8-4 window 8-1 help, obtaining vii, xi HP authorized reseller xii technical support - HP OmniBook 600C | fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 68
5-1 service control manager 8-1 symbols on equipment x system requirements HAFM server 2-1 T technical support, HP xi V VGA monitor 2-1 W warning rack stability xi Web server 5-1 configure 5-3 websites HP storage xii Windows 2000 power options 4-1 setup 4-1 Index-2 HAFM server installation guide
hp StorageWorks
HAFM server
installation guide
Part Number: A6582-96001/AA-RT4KA-TE
First Edition (August 2002)
This document describes the setup and configuration requirements for
the HP Omnibook 6000/6200 notebook PC to function as an HAFM
Server.